- New
Reference: 10HS ECHO - 5Mts
10HS ECHO DECAGON Soil Moisture Sensor (Large Volume)
Soil Moisture Sensor from Decagon Devices.
- APPLICATIONS
- CATALOGS
- PRODUCTS
- BROWSE BY MEASUREMENT
- 4-20mA
- ABSOLUTE PRESSURE
- AC CURRENT
- AIR DIRECTION
- AIR QUALITY
- AIR TEMPERATURE
- AMPERES (A)
- BAROMETRIC PRESSURE
- CARBON DIOXIDE
- Color / Colorimeter
- COMPRESSED AIR
- COMPRESSED AIR FLOW
- CONDUCTIVITY
- DC CURRENT
- DENDROMETERS
- DEW POINT
- DIFFERENTIAL PRESSURE
- DUST SENSOR
- ELECTRICAL CONDUCTIVITY (SOIL)
- ELECTRICAL CONDUCTIVITY (WATER)
- ELECTRICAL NETWORK ANALYZERS
- ENGINE ON/OFF
- EVAPOTRANSPIRATION
- GAUGE PRESSURE
- ILLUMINANCE
- KILOWATT HOURS (kWh)
- KILOWATTS (kW)
- LEAF MOISTURE
- LIGHT INTENSITY
- NOISE
- OXYGEN
- PAR RADIATION
- PARTICLE COUNTERS
- PH
- PULSE INPUT
- RAINFALL
- RELATIVE HUMIDITY
- REMOTE WATER LEVEL MONITORING
- SALINITY
- SOIL HUMIDITY
- SOIL TEMPERATURE
- SOIL WATER POTENTIAL
- SOLAR RADIATION
- TEMPERATURE
- THERMOCOUPLE
- UV RADIATION
- VELOCIDAD AIRE
- WATER FLOW
- WATER LEVEL
- WATER PRESSURE
- WATER TEMPERATURE
- WIND
- BY ENVIRONMENT
- BY TYPE
- WEATHER STATIONS
- BROWSE BY MEASUREMENT
Reference: BASE-U-4
BASE-U-4 - HOBO Optical USB Base Station
A splash resistant base station and couplers used to download data from any HOBO data logger with an optical USB interface.
Reference: UA-002-64
Brand: ONSET
UA-002-64 HOBO Pendant Temperature/Light 64K Data Logger
A miniature, value-priced, waterproof data logger for temperature and light monitoring applications; stores 52K measurements.
IMPORTANT INFORMATION
Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1).
HOBOware Pro is required when using the HOBO Waterproof Shuttle. See compatible items below.
Reference: U20L-02-KIT
Brand: ONSET
U20L-02, U-DTW-1, BHW-PRO GEOCONTROL, S.A.
U20L-02 plus U-DTW-1plus BHW-PRO
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
DS1922E-F5 High-Temperature Logger iButton, 8KB Datalog Memory
DS1922E-F5 High-Temperature Logger iButton
Applications
High-Temperature Logging (Process Monitoring, Industrial Temperature Monitoring)
Steam Sterilization
-
PAYMENT METHODS
H722 Current Transducer Veris
The Hawkeye 722 provide accurate load trending information with a proportional 0 to 5 VDC output signal. Slide-switches provide easy field selection of monitored amperage range without jumpers.
Self-powered analog current sensor simplifies installation
No external power required for sensor
Factory calibrated ranges for increased flexibility and resolution
No jumpers on unit, reduces installation error
Induced from monitored conductor sensor power.
Description
SPECIFICATIONS
- Application: Building Automation Systems
- Current Measurement Accuracy: ±2% of full scale above 6 A
- Current Measurement Range: 0 - 60 A
- Current Sensor Type: Current Transducer, AC
- Electrical Wire Size: 24 - 14 AWG (0.2 - 2.1 mm²)
- Measurement Type: AC Current
- Model: H722
- Monitored Frequency Range: 50 - 60 Hz
- Monitored Wire Size: 0.7" (18 mm)
- Mounting: Solid Core
- Operating Humidity: 10 - 90% RH, non-condensing
- Operating Temperature: 5 - 140°F (-15 - 60°C)
- Output Specifications: 0 - 5 VDC
- Outputs: Analog Output
- Product Certification: UL | CE
- Product Type: Sensor
- Range: Serial HX22
- Relay Coil Voltage: None
- Relay Contact Ratings: None
- Relay Poles/Shuttles: None
- Warranty: 5 years
Product Details
H722
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
Reference: PL1000
Brand: NESA
PL1000 1000 cm² class A rain gauge
The PL1000 class A rain gauge consists of a cylindrical body made of anodised aluminium with a collection surface of 1000 cm² on which is mounted a funnel-shaped collection hole which, through a filter, directs the water into a stainless steel bucket made with a blade-support system. A Reed contact detects the switching of the rocker arm, filtering any...
Reference: SST
Brand: NESA
SST Soil surface temperature sensor
Adjust the temperature of the floor surface at an adjustable height between 3 and 5 cm.Heat-resistant sensitive element Pt100 1/3DIN with four-wire connection.The sensitive element is protected by a series of panels against direct solar radiation and UV radiation, profiled arrangements that guarantee natural internal ventilation at ground level.On a...
Reference: P3110E
Brand: COMET
P3110E Humidity and Temperature Transmitter with 4-20mA Outputs
P3110E - Humidity and Temperature Transmitter with 4-20mA Outputs
Low cost ambient temperature, relative humidity transmitter. Outdoor, indoor use.
Built-in relative humidity, temperature sensors.
Reference: INTEGRADOR S10 MINI
Brand: Meatrol
INTEGRADOR S10 MINI
The S10 is a mini Rogowski coil integrator combined with power meter or PLC, in a plastic case, powered directly from the main one.
Reference: RTR-574
Brand: TandD
RTR-574 T + H + Illuminance + UV logger
Channels: Illuminance, UV Intensity, Temperature, HumidityRange: Illuminance: 0 to 130klxUV Intensity: 0 to 30mW/cm2Temperature: 0 to 55°CHumidity: 10 to 95%RHComm Interfaces: USB, Short Range Wireles
Reference: S1SA1S
Brand: MAE
S1SA1S - 1D Accelerometer Sensor 1 V/g
Description
Single component accelerometer sensor for structural and environmental seismic monitoring, accuracy of 1 V/g, housed in an aluminum IP-67 protection rate case with embedded fixing flaps; ideal for installation in hard environments, it is supplied with IP-67 12 male Amphenol connector with protective cap and orange polish PUR cable. Aluminum...
Reference: T3610
Brand: COMET
T3610 Web Sensor with PoE - remote thermometer hygrometer with Ethernet interface
Ambient temperature, relative humidity t-line Web sensor with Power over Ethernet feature. Remote alarm.
PoE Web Sensor with built-in relative humidity and temperature sensors. Can serve as weather sensor.
If you power via POE, you do not need the external power accessory.
If you do not have POE you must use an external power supply
INCLUDED IN DELIVERY:...
Reference: TEROS 10
Brand: METER GROUP
TEROS 10 Simple soil water content sensor
TEROS 10, 5m cable, 3.5mm stereo plug
Reference: LS195
Brand: LINSHANG
LS195 Gloss Meter
LS195 is a handheld gloss meter with a range of 0-200GU. It is professionally used for the surface gloss measurement of paint, coating, ink, plastic, paper, ceramics, stone, metal and other materials. The operation of the device is simple. You can just put the device on the materials and start to measure under normal mode, and there is no need to wait...
Reference: K-600N
Brand: BOSEAN
K-600N 6 in 1 Multi Gas Detector (IP67)
K-600N diffusion multi-gas detector is a new intelligent gas detector, which adopts an advanced integrated circuit, with standard intelligent level design technology, and proprietary digital analog hybrid communication technology. The detector is of excellent sensitivity and repeatability, which makes it very easy to use and maintain. Thus greatly meets...
Reference: S070
Brand: HORIBA LAQUAtwin
S070 Replacement Conductivity / TDS sensor for B‐771, EC11, EC22 and EC33
Replacement sensor for LAQUAtwin EC-11, LAQUAtwin EC-22 and LAQUAtwin EC-33 conductivity meterFollowing the same principle as standard laboratory electrodes, LAQUAtwin contains all components in a flat sensor less than 1 mm thick.Water-resistant structure protects the instrument.
Reference: LAQUA‐EC210‐K
Brand: HORIBA LAQUAtwin
LAQUA‐EC210‐K EC 210 Portable Conductivity Meter (Series 200)
LAQUA‐EC210‐K EC 210 Portable Conductivity Meter (Series 200)
Measures conductivity, salinity, resistivity, total dissolved solids (TDS) and temperature. Features IP67 protection system. Backlit LCD display that allows simultaneous reading of conductivity, actual sample temperature and measurement duration. Automatic scale change to obtain the reading...
Reference: SFT Sensor de flujo de calor
Brand: NESA
SFT Heat flow sensor between two surfaces
Sensor especially indicated in agrometeorology for determining the heat flow in the soil, important for controlling germination, rooting or development of pathogenic elements for crops, in geology for defining the state of soil thawing and the analysis of thermal equilibrium, etc.
Reference: 11060054
Brand: FUEL CELL
11060054 Platinum on Vulcan - Carbon Cloth Electrode (W1S1011) 0.3 mg/cm² 40%
A low-cost electrode utilizing a woven carbon cloth substrate and a 40% Platinum on Vulcan Carbon support catalyst. This low loading is designed for cost sensitive applications and is suitable for electrochemical systems needing low amounts of Platinum to support the reaction. This electrode is perfect for Hydrogen/Air Fuel Cell applications where the...
Reference: K-600M
Brand: BOSEAN
K-600M 6 in 1 Multi Gas Detector with integrated Pump
The K-600M 6 in 1 is the latest gas detector developed by Bosean. It has a built-in suction pump as a gas detection method, which can detect up to 6 types of gas at the same time.
Integrates a miniature vacuum suction pump
With stable flow
Long useful life
Low noise level.
Reference: S080‐ORP
Brand: HORIBA LAQUAtwin
S080‐ORP Standard Solution (Sodium Ion 2000 ppm) 6x14ml
S080‐ORP Standard Solution (Sodium Ion 2000 ppm) 6x14ml
For the calibration point of the LAQUAtwin Na-11 meterEach bottle of calibration solution allows for approximately 30 calibrationsVolume of each bottle 14 mlSet of 6 bottles
The Hawkeye 722 provide accurate load trending information with a proportional 0 to 5 VDC output signal. Slide-switches provide easy field selection of monitored amperage range without jumpers.
Self-powered analog current sensor simplifies installation
No external power required for sensor
Factory calibrated ranges for increased flexibility and resolution
No jumpers on unit, reduces installation error
Induced from monitored conductor sensor power.