A miniature, value-priced, waterproof data logger for temperature and light monitoring applications; stores 52K measurements.
IMPORTANT INFORMATION
Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1).
HOBOware Pro is required when using the HOBO Waterproof Shuttle. See compatible items below.
VH400 Soil Moisture Sensor Probe Specifications
Power consumption: < 13mA
Supply Voltage: 3.5V to 20 VDC.
Dimensions See drawing.
Power on to Output stable: 400 ms
Output Impedance: 10K ohms
Operational Temperature: -40ºC to 85ºC
Accuracy at 25°C: 2%
Output: 0 to 3V related to moisture content
Shell Color: Red
Voltage Output Curves: Curves, Piecewise...
SKU 6410 - Anemómetro para Vantage Pro2™ y EnviroMonitor
Mide con precisión la dirección y la velocidad del viento.
Probado en túnel de viento a 322 km/h (200 mph).
Se puede usar con un transmisor de sensor, un nodo EnviroMonitor o como anemómetro de repuesto para el Vantage Pro2 inalámbrico o con cable.
6415 Sonic Anemometer
Accurately measures wind direction and speed with no moving parts.
Solar and battery powered.
Captures wind speeds from 0 to 144 km/h (0 to 90 mph).
Uses sonic pulses to detect air movement.
Includes mounting hardware, battery, alignment tool, and a 12 m (40 ft) cable.
One-year manufacturer's war
6420 Leaf Wetness Sensor, Vantage Pro2™ and EnviroMonitor®
It is used to monitor the surface moisture level of foliage, with a range of 0 (completely dry) to 15 (saturated).The leaf wetness sensor must be connected to a wireless soil moisture/temperature station (no. 6345 or 6345CS) or an EnviroMonitor node (no. 6810). A 12 m (40 ft) cable is included.
6440 Soil Moisture Sensor, Vantage Pro2™ and EnviroMonitor®
The Watermark® Soil Moisture Sensor uses electrical resistance to measure soil moisture levels. It requires no periodic maintenance during the growing season. Simply bury it at the desired depth and monitor moisture levels throughout the season.The soil moisture sensor must be connected to a Leaf...
6450 Solar Radiation Sensor
Highlighted Features: Measures solar radiation for evapotranspiration (ET) and temperature/humidity/sun/wind (THSW) index.The diffuser element and housing are carefully designed for accurate cosine response.The silicon photodiode provides good matching to the solar spectrum.
6464 AeroCone Rain Collector with Flat Base for Vantage Pro2 and EnviroMonitor (tipping spoon)
Add an additional standalone rain gauge to your Vantage Pro2 or Vantage Vue with a sensor transmitter and WeatherLink Live.
Install it on an EnviroMonitor node that reports to an EnviroMonitor gateway.
The streamlined AeroCone and self-emptying tipping bucket...
6470 Stainless Steel Temperature Probe with Two-Wire Termination
Measure air, soil, or water temperature with this multipurpose temperature probe.
Use it with a leaf and soil humidity/temperature station (up to four per station) or with an EnviroMonitor node.
The probe has a 64 mm (2-1/2") long stainless steel housing and includes a 4.6 m (15') direct...
6475 Stainless Steel Temperature Probe with RJ Connector
The multipurpose temperature probe measures air, soil, or water temperature. It can be used with a sensor transmitter or an EnviroMonitor node. It can also be used with Weather Envoy or Vantage Connect to replace the internal temperature sensor.It incorporates a stainless steel-clad electronic...
6477 Temperature Probe with RJ Connector
Multi-purpose temperature probe that measures air, soil, or water temperature. It can be used with a sensor transmitter or an EnviroMonitor node (with RJ-45 connector, no. 6860). It can also be used with Weather Envoy or Vantage Connect to replace the internal temperature sensor.Measures temperatures from -40°C...
6490 UV Sensor
Highlighted Features:
Measures the portion of the UV spectrum affected by solar radiation. Displays UV index, dose rate, and daily and cumulative dose.
The diffuser provides excellent cosine response.
Measures global solar UV irradiance, which includes both directly transmitted and scattered UV radiation.
The transducer responds only to...
6830 Temperature/Humidity Sensor with Radiation Shield
Add a temperature/humidity sensor to your Vantage Pro2 or EnviroMonitor system. Use it with a sensor transmitter or EnviroMonitor node for greater placement flexibility.The temperature sensor's accuracy and range are ±0.5°F (±0.3°C) from -40°C to 65°C (-40°F to 150°F).The humidity sensor's accuracy is...
6832 Temperature/Humidity Sensor with 24-hour Fan-Aspirated Radiation Shield
Add a 24-hour fan-assisted radiation-shielded temperature/humidity sensor to your Vantage Pro2 or EnviroMonitor system. Use it with a sensor transmitter or EnviroMonitor node for flexible placement options.The temperature sensor's accuracy is ±0.3°C (±0.5°F) from -40°C to 65°C...
6834 Temperature/Humidity Sensor
Highlighted Features:
Includes temperature and humidity sensors inside a protective housing. Ideal for indoor use. We recommend using an AC-powered wireless sensor transmitter. Can also be used with an EnviroMonitor system or a solar-powered wireless sensor transmitter.Includes mounting hardware and a 7.6 m (25 ft) cable.
6860 RJ Connector Node Adapter
Highlighted Features:
Connect sensors with RJ-45 connectors to your EnviroMonitor node with this adapter.Not compatible with the AeroCone Rain Collector (#6463, #6465).
