
Reference: 10HS ECHO - 5Mts
Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: VH400-2M
Brand: VEGETRONIX
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
-Power supply:2900mAh lithium battery or 5V DC
-Harmonic:51THD
-16GB memory,USB-DISK download data
-Modbus-TCP communication
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-3 Rated current selectable:600A/3kA/6kA
-Current clamp:10A(100mA~10A): ST08 (320mV/10A)
-Voltage,Current,Harmonic,Demand,Power factory,Frequency,Max/Min
value,active reactive apparent power and
energy,Unbalance,Angle.Voltage swell, sag,waveform display.
-Recorded data: Event type, Start time, Duration, Amplitude value, voltage
RMS 1/2 value, Voltage waveform
Accessories:5pcs voltage clamp,adaptor
(PRICE NOT INCLUDED BOX AND ROGOWSKI COIL, CURRENT
CLAMP,INCLUDED 5PCS voltage clamp)
Mi550 Portable Three Phase Electrical Power Quality Analyzer Externally Connected with Open Type Rogowski Coil
or voltage CT, can perform cable testing without dismantling, simplify testing steps, save construction costs,
and is more suitable for engineering testing as well as system distribution inspection and maintenance.
-Single-phase and three-phase support system. It can measure multiple electrical parameters.
such as current, voltage, power factor, power, energy and power quality parameters including
harmonics, degree of imbalance, voltage rise and fall, etc.
- In addition to the measurement function, Mi550 is equipped with various registers, such as
waveform records and programmable interval measurement value records. For storing and recording data, there is an internally integrated 32 GB memory card.
- With standard RJ45 Ethernet communication interface configuration, using standard Modbus
TCP protocol, it is compatible with various configuration systems and could transmit the electrical information.
parameters collected by the front-end to the system data center in real time.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: NRC-150
Brand: Meatrol
Reference: ME231
Brand: Meatrol
Reference: S1.1
Brand: Meatrol
Reference: ME238
Brand: Meatrol
Reference: KRC-50
Brand: Meatrol
Reference: TRC-24
Brand: Meatrol
Reference: STP-5
Brand: Meatrol
Reference: DTP.1
Brand: Meatrol
Reference: ME131M
Brand: Meatrol
Reference: ME437-SD
Brand: Meatrol
Reference: D1.1
Brand: Meatrol
Reference: Y-FCT-200
Brand: Meatrol
Reference: NRC-200
Brand: Meatrol
Reference: MQ21
Brand: Meatrol
Reference: HF-IN
Brand: Meatrol
Reference: ME435
Brand: Meatrol
Reference: ME440-No Rogoswki coils
Brand: Meatrol
Reference: ME531
Brand: Meatrol
Reference: ME437-SD
Brand: Meatrol
-Power supply:2900mAh lithium battery or 5V DC
-Harmonic:51THD
-16GB memory,USB-DISK download data
-Modbus-TCP communication
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-3 Rated current selectable:600A/3kA/6kA
-Current clamp:10A(100mA~10A): ST08 (320mV/10A)
-Voltage,Current,Harmonic,Demand,Power factory,Frequency,Max/Min
value,active reactive apparent power and
energy,Unbalance,Angle.Voltage swell, sag,waveform display.
-Recorded data: Event type, Start time, Duration, Amplitude value, voltage
RMS 1/2 value, Voltage waveform
Accessories:5pcs voltage clamp,adaptor
(PRICE NOT INCLUDED BOX AND ROGOWSKI COIL, CURRENT
CLAMP,INCLUDED 5PCS voltage clamp)
check_circle
check_circle