- New
Reference: 10HS ECHO - 5Mts
10HS ECHO DECAGON Soil Moisture Sensor (Large Volume)
Soil Moisture Sensor from Decagon Devices.
- APPLICATIONS
- CATALOGS
- PRODUCTS
- BROWSE BY MEASUREMENT
- 4-20mA
- ABSOLUTE PRESSURE
- AC CURRENT
- AIR DIRECTION
- AIR QUALITY
- AIR TEMPERATURE
- AMPERES (A)
- BAROMETRIC PRESSURE
- CARBON DIOXIDE
- Color / Colorimeter
- COMPRESSED AIR
- COMPRESSED AIR FLOW
- CONDUCTIVITY
- DC CURRENT
- DENDROMETERS
- DEW POINT
- DIFFERENTIAL PRESSURE
- DUST SENSOR
- ELECTRICAL CONDUCTIVITY (SOIL)
- ELECTRICAL CONDUCTIVITY (WATER)
- ELECTRICAL NETWORK ANALYZERS
- ENGINE ON/OFF
- EVAPOTRANSPIRATION
- GAUGE PRESSURE
- ILLUMINANCE
- KILOWATT HOURS (kWh)
- KILOWATTS (kW)
- LEAF MOISTURE
- LIGHT INTENSITY
- NOISE
- OXYGEN
- PAR RADIATION
- PARTICLE COUNTERS
- PH
- PULSE INPUT
- RAINFALL
- RELATIVE HUMIDITY
- REMOTE WATER LEVEL MONITORING
- SALINITY
- SOIL HUMIDITY
- SOIL TEMPERATURE
- SOIL WATER POTENTIAL
- SOLAR RADIATION
- TEMPERATURE
- THERMOCOUPLE
- UV RADIATION
- VELOCIDAD AIRE
- WATER FLOW
- WATER LEVEL
- WATER PRESSURE
- WATER TEMPERATURE
- WIND
- BY ENVIRONMENT
- BY TYPE
- WEATHER STATIONS
- BROWSE BY MEASUREMENT
Reference: BASE-U-4
BASE-U-4 - HOBO Optical USB Base Station
A splash resistant base station and couplers used to download data from any HOBO data logger with an optical USB interface.
Reference: UA-002-64
Brand: ONSET
UA-002-64 HOBO Pendant Temperature/Light 64K Data Logger
A miniature, value-priced, waterproof data logger for temperature and light monitoring applications; stores 52K measurements.
IMPORTANT INFORMATION
Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1).
HOBOware Pro is required when using the HOBO Waterproof Shuttle. See compatible items below.
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
DS1922E-F5 High-Temperature Logger iButton, 8KB Datalog Memory
DS1922E-F5 High-Temperature Logger iButton
Applications
High-Temperature Logging (Process Monitoring, Industrial Temperature Monitoring)
Steam Sterilization
Reference: DS9107+
Brand: iBUTTON MAXIM INTEGRATED
DS9107+ Capsule for Immersing iButton in Liquids
DS9107+
The iButton® Capsule is a mechanical enclosure to protect Temperature Logger iButtons (DS1921 and DS1922 series) from moisture, solvents and pressure.
-
PAYMENT METHODS
U8415 CO2 monitor with built-in carbon dioxide sensor
U8415 CO2 monitor with built-in carbon dioxide sensor
CO2 monitor - carbon dioxide level detector. Although carbon dioxide is invisible and odourless, increased CO2 content in the room leads to fatigue and decreased mental concentration.
Battery powered device U8415 with external power (optional accessories) is designed to indication of CO2 concentration inside buildings (schools, conference halls, hospitals, offices, cinemas, theaters etc.).
The level of CO2 concentration is indicated by the device using three colors. Changes in the indicated states are also signaled acoustically - by a beep. The signaling method can be set by the user using the COMET Vision software.
The device U8415 is equipped with a maintenance-free and long-term stable NDIR sensor with dual wavelength and multi-point calibration.
Green LED flashes - CO2 concentration 0 to 1000 ppm
Yellow LED flashes - CO2 concentration 1001 to 1400 ppm
Red LED flashes - CO2 concentration 1401 ppm and more
Recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
Description
Technical data
Measured value
CO2
CO2 SENSOR
Measuring range 0 to 5000 ppm
Accuracy ±(50 ppm +3% from reading)
Measurement interval 15 s with external power supply, 2 min on battery power
GENERAL TECHNICAL DATA
- Operating temperature: -20 to +60 °C
- Channels: internal CO2 sensor
- Power: Li-Ion battery A8200, 3.6V/5200mAh
- Protection class: IP30
- Recommended calibration: interval 5 years
- Dimensions: 61 x 93 x 53 mm
- Weight approx.: 250 g
- Warranty: 3 years
Product Details
U8415
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
Reference: S010 (3200459834)
Brand: HORIBA LAQUAtwin
S010 (3200459834) Replacement pH sensor for B‐21x & B‐71x, PH-11, PH-22, PH-33
Replacement sensor for pH-meter LAQUAtwin pH-11, LAQUAtwin pH-22 and LAQUAtwin pH-33
Specifications
Measuring range: pH 0 to 14
Sample amount required: Approx. 0.1 mL
Measuring temperature: 5 to 40°C
Liquid junction: Porous macromolecule
Reference: F800 COMETEO
Brand: COMET
F800 COMETEO Professional Multi-Plate Radiation Shield for Weather Sensors
Features
Multi-board design for passive ventilation
Compatibility with a wide range of weather sensors
Rugged protection for outdoor applications
Proven resistance in extreme environments such as Antarctica
Reference: RSTAR Affinity Tilt Logger
RSTAR Affinity Tilt Logger
Product Features
Low Power Wide Area Network communications using LoRa technology
Robust, compact design with IP68 weatherproofing
Internal and external antenna options
Seamless integration with Affinity Data Platform
Reference: SC-1
SC-1 Leaf Porometer Stomatal Conductance
To measure stomatal conductance using the steady state technique.
SC-1 Porometer Applications
Water use and water balance.
Measurement of water stress.
Basic research in plant physiology.
Herbicide assimilation.
Assimilation of ozone and other polluting agents.
Tests and comparative studies.
Stomatic behavior.
Reference: MCR-4V
Brand: TandD
MCR-4V Logger with 4 Channels on a Single Unit
MCR-4V Logger with 4 Channels on a Single Unit
Channels: Voltage 4ch (Sensor not provided)
Range: ±300mV to ±24V, AUTO
Comm Interfaces: USB
Reference: LS177
Brand: LINSHANG
LS177 Large Aperture Spectrocolorimeter
LS177 large aperture spectrocolorimeter adopts D/8 illumination geometry, with 50mm large test aperture, specialized in color measurement and color comparison of non-transparent materials such as powder, masterbatches and so on. The spectrocolorimeter not only has various color spaces and color difference formulas, but also can display spectral...
Reference: S-SMC-M005
Brand: ONSET
S-SMC-M005 EC5 Soil Moisture Smart Sensor
Small area of influence
An affordable soil moisture smart sensor with a two-tine design for easy installation; integrates the field-proven ECH2O™ EC-5 Sensor and a 12-bit A/D. An affordable soil moisture smart sensor with a two-tine design for easy installation; integrates the field-proven ECH2O™ EC-5 Sensor and a 12-bit A/D.
Reference: PL200
Brand: NESA
PL200 200 cm² Class A Rain Gauge
El pluviómetro Helmmann PL200 es un pluviómetro manual formado por un cuerpo cilíndrico de aluminio anodizado con una superficie de recogida de 200 cm² que recoge la lluvia en un recipiente de hasta 3 litros de capacidad (que corresponde a 150 mm) o directamente en un recipiente de clase A o A+ de 250 ml (250 cm3) equivalente a 12,5 mm de precipitación...
Reference: PX3PXX01S
Brand: VERIS
PX3PXX01S Dry Differential Pressure Sensor Veris
PX3PXX01S Dry Differential Pressure Sensor Veris
Panel Enclosure Dry Media Differential Pressure/Air Velocity Transducer, 0 to 1 in-WG
Reference: LS175
Brand: LINSHANG
LS175 45/0 Colorimeter with 20mm Aperture
LS175 is a handheld 45/0 illumination geometry colorimeter with a large 20mm measuring aperture, a 3.5-inch IPS color capacity touch screen, and can connect with mobile phone or PC. This device can work independently without connecting APP on mobile phone or PC software. Several color charts helps matching the closest color number of scanned color in...
Reference: UTAI
Brand: NESA
UTAI indoor thermohygrometric sensor
Sensor for measuring temperature and humidity of air in indoor environments. Compact and robust, it can be interconnected with a wireless transmission module using the ZigBee protocol in such a way as to allow the creation of a network composed of multiple sensors, which can be acquired directly by a Nesa TMF100 or TMF500 series data logger using a...
Reference: DT Link
DT Link Wireless Data Collection from Data Loggers
Product Features
NEMA 4X (IP66) weather-resistant enclosures
Low power consumption and long battery life
Data can be gathered in seconds in hard-to-access areas
Instant USB connection with office laptops
Reference: PX3DXN02S
Brand: VERIS
PX3DXN02S Dry Differential Pressure Sensor Veris
PX3DXN02S Dry Differential Pressure Sensor Veris
Duct Enclosure Dry Media Differential Pressure/Air Velocity Transducer, NIST 8-Point, 1 to 10 in-WG
U8415 CO2 monitor with built-in carbon dioxide sensor
CO2 monitor - carbon dioxide level detector. Although carbon dioxide is invisible and odourless, increased CO2 content in the room leads to fatigue and decreased mental concentration.
Battery powered device U8415 with external power (optional accessories) is designed to indication of CO2 concentration inside buildings (schools, conference halls, hospitals, offices, cinemas, theaters etc.).
The level of CO2 concentration is indicated by the device using three colors. Changes in the indicated states are also signaled acoustically - by a beep. The signaling method can be set by the user using the COMET Vision software.
The device U8415 is equipped with a maintenance-free and long-term stable NDIR sensor with dual wavelength and multi-point calibration.
Green LED flashes - CO2 concentration 0 to 1000 ppm
Yellow LED flashes - CO2 concentration 1001 to 1400 ppm
Red LED flashes - CO2 concentration 1401 ppm and more
Recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.