Reference: 10HS ECHO - 5Mts
10HS ECHO DECAGON Soil Moisture Sensor (Large Volume)
Soil Moisture Sensor from Decagon Devices.
- APPLICATIONS
- CATALOGS
- PRODUCTS
- BROWSE BY MEASUREMENT
- 4-20mA
- ABSOLUTE PRESSURE
- AC CURRENT
- AIR DIRECTION
- AIR QUALITY
- AIR TEMPERATURE
- AMPERES (A)
- BAROMETRIC PRESSURE
- CARBON DIOXIDE
- Color / Colorimeter
- COMPRESSED AIR
- COMPRESSED AIR FLOW
- CONDUCTIVITY
- DC CURRENT
- DENDROMETERS
- DEW POINT
- DIFFERENTIAL PRESSURE
- DUST SENSOR
- ELECTRICAL CONDUCTIVITY (SOIL)
- ELECTRICAL CONDUCTIVITY (WATER)
- ELECTRICAL NETWORK ANALYZERS
- ENGINE ON/OFF
- EVAPOTRANSPIRATION
- GAUGE PRESSURE
- ILLUMINANCE
- KILOWATT HOURS (kWh)
- KILOWATTS (kW)
- LEAF MOISTURE
- LIGHT INTENSITY
- NOISE
- OXYGEN
- PAR RADIATION
- PARTICLE COUNTERS
- PH
- PULSE INPUT
- RAINFALL
- RELATIVE HUMIDITY
- REMOTE WATER LEVEL MONITORING
- SALINITY
- SOIL HUMIDITY
- SOIL TEMPERATURE
- SOIL WATER POTENTIAL
- SOLAR RADIATION
- TEMPERATURE
- THERMOCOUPLE
- UV RADIATION
- VELOCIDAD AIRE
- WATER FLOW
- WATER LEVEL
- WATER PRESSURE
- WATER TEMPERATURE
- WIND
- BY ENVIRONMENT
- BY TYPE
- WEATHER STATIONS
- BROWSE BY MEASUREMENT
Reference: BASE-U-4
BASE-U-4 - HOBO Optical USB Base Station
A splash resistant base station and couplers used to download data from any HOBO data logger with an optical USB interface.
Reference: UA-002-64
Brand: ONSET
UA-002-64 HOBO Pendant Temperature/Light 64K Data Logger
A miniature, value-priced, waterproof data logger for temperature and light monitoring applications; stores 52K measurements.
IMPORTANT INFORMATION
Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1).
HOBOware Pro is required when using the HOBO Waterproof Shuttle. See compatible items below.
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
DS1922E-F5 High-Temperature Logger iButton, 8KB Datalog Memory
DS1922E-F5 High-Temperature Logger iButton
Applications
High-Temperature Logging (Process Monitoring, Industrial Temperature Monitoring)
Steam Sterilization
Reference: DS9107+
Brand: iBUTTON MAXIM INTEGRATED
DS9107+ Capsule for Immersing iButton in Liquids
DS9107+
The iButton® Capsule is a mechanical enclosure to protect Temperature Logger iButtons (DS1921 and DS1922 series) from moisture, solvents and pressure.
-
PAYMENT METHODS
ME435 Portable Multifunctional Three-Phase Power Analyzer with Rogowski Coils MEATROL
INCLUDED 4PCS voltage clamp
-Power supply:4*AA battery or 5V DC
-Harmonic:51THD
-4GB SD card recorder
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-5 Rated current selectable:100A/600A/1kA/3kA/6kA 100A MRC-24 (50mV/kA@50Hz)
600A MRC-36 (50mV/kA@50Hz)
1000A NRC-100 (85mV/kA@50Hz)
3000A NRC-150 (85mV/kA@50Hz)
6000A NRC-200 (50mV/kA@50Hz)
-Current clamp:10A(100mA～10A): ST08 (320mV/10A)
-Voltage,Current,Harmonic,Demand,Power factor,Frequency,Max/Min value,active reactive apparent power and energy,Unbalance,Angle. Accessories:4pcs voltage clamp,adaptor,SD card.
(PRICE NOT INCLUDED BOX AND ROGOWSKI COIL, CURRENT CLAMP)
Description
The ME435 power meter measures currents and voltages and reports RMS values in real time for all phases and neutrals. In addition, the power meter calculates power factor, real power, reactive power and more.
The ME435 power meter calculates and stores total and per-phase energy values for active, reactive and apparent energy.
You can see the power values from the screen. The resolution of the energy value automatically changes from kWh to MWh to
GWh (kVAh to MVARh to GWh).
The energy values are automatically reset to 0 when the limit of 999.9 GWh, 999.9 GVAh or 999.9 GVARh is reached.
Product Details
ME435
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
Reference: NRC-200
Brand: Meatrol
NRC- 200 Thin Flexible Rogowski coil fixed with cable ties
"-Window size:200mm
-Section :8mm
-Rated input:6000A
-Cable length:2 meter
-Calibrated Accuracy:±0.5%(temperature drift:300ppm/C)
-Ratio:50mV/kA@50Hz
-linearity:0.2%(from 1% to 100% of rated )
-Position error:±1%"
Reference: RX3004+SP-611
Brand: ONSET
HOBO RX3004 Remote Monitoring Station Data Logger
HOBO's most flexible remote data logging cloud-based station: instant, site-specific indoor/outdoor environmental data.
IMPORTANT INFORMATION
External sensors sold separately. Requires a HOBOlink data plan, which must be renewed annually. Learn more about HOBOlink.
Reference: HF-IN
Brand: Meatrol
HF-IN High Frequency integrator
-Rated input::10kA,100kA Peak(only choice one point,accept OEM)
-Rated output:0-10V Peak
-Rated coil ratio:1.2mV/kA@50Hzneed to be define)
-Accuracy:±1%
-Bandwidth:1kHz to 1MHz
-Power supply:4-12V(default);24V DC
Reference: MQ21
Brand: Meatrol
MQ21 Energy Quality Analyzer
MQ21 Energy Quality Analyzer
-Power supply: Electricity from major loop, 90～528VAC or External 18650 lithium battery (not included)
-Harmonic: 51 times simultaneously
-16GB Micro SD card, USB Data Download
-Communication: Modbus TCP & Modbus RTU
-Supported current sensor: Rogowski coil; Voltage-output current clamp
-3 Rated current optional:...
Reference: Mi550
Brand: Meatrol
Mi550 Portable Three Phase Power Quality Analyzer
Mi550 Portable Three Phase Electrical Power Quality Analyzer Externally Connected with Open Type Rogowski Coilor voltage CT, can perform cable testing without dismantling, simplify testing steps, save construction costs,and is more suitable for engineering testing as well as system distribution inspection and maintenance.
Reference: S9.4
Brand: Meatrol
S9.4 Waterproof Integrator
The S9.4 is a waterproof Rogowski coil integrator combined with a power meter or PLC, in a plastic housing, directly powered of the electrical network.
-Rated input::100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)
-Rated output:4-20mA
-Rated coil ratio:50mV/kA or 85mV/kA(need to be define)
-Accuracy:±0.5%(from 1% to 100%)
-Bandwidth:5Hz to 20KHz...
Reference: MX1105
Brand: ONSET
MX1105 HOBO 4-Channel Analog Data Logger Bluetooth
MX1105 HOBO 4-Channel Analog Data Logger Bluetooth
Four channel inputs to measure and transmit data wirelessly from chosen sensors to your mobile device or Windows laptop via Bluetooth technology.
Important Information
External sensors sold separately. Requires HOBOconnect app and a compatible mobile device or Windows computer.
Reference: NRC-150
Brand: Meatrol
NRC-150 Thin Flexible Rogowski coil fixed with cable ties
"-Window size:150mm
-Section :8mm
-Rated input:3000A
-Cable length:2 meter
-Calibrated Accuracy:±0.5%(temperature drift:300ppm/C)
-Ratio:85mV/kA@50Hz
-linearity:0.2%(from 1% to 100% of rated )
-Position error:±1%"
Reference: ME531
Brand: Meatrol
ME531 Rogowski Multifunction Data collector
ME531 Rogowski Multifunction Data collector
-Multifunction Data collector
-DIN-RAIL NO LCD
-Communication: MODBUS-RS485
-Power supply:85-240V
-Harmonic:51THD
-2*digital output ,2*digital input,
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-5 Rated current selectable:100A/600A/1kA/3kA/6kA
100A MRC-24 (50mV/kA@50Hz)
600A MRC-36 (50mV/kA@50Hz)...
Reference: MRC-16
Brand: Meatrol
MRC-16 Mini flexible Rogowski coil
Advantage*Excellent linearity*Wide dynamic range* Not damaged by large overloads* Excellent degree of rejection to the externalcurrent conductor* No danger from open-circuited secondary* Zero power consumption* Small position error* Soft and light, easy to install* Long-term stability* Wide dynamic range* IP67 protection level
Reference: DA01
Brand: Meatrol
DA01 Integrator for Rogowski Coils
DA01
1A output Integrator
-Rated input:100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)
-Rated output:0-1A rms, 0-100mA rms
-Accuracy:±0.5% (from 1% to 100% of rated )
-Bandwidth:30Hz to 5KHz
-Power supply:12V or 24V DC(Default 24VDC)
-Maximum Burden 0.5Ω
-Maximum power 5W
Reference: ME131M
Brand: Meatrol
Multi-circuit Smart Energy meter ME131M
ME131 multi-circuit smart energy meter is compatible with both Rogowski coil and voltage-output split core current transformer, which could realize dismantling-free conductor test, simplify test procedures and save construction costs.
Reference: H721HC
Brand: VERIS
H721HC Veris Current Transducer
Hawkeye 0 to 50/100/200 A Input 4 to 20 mA DC Output Analog Current Transducer, Split-Core, 0.7 in
Reference: ME631-SD
Brand: Meatrol
ME631-SD Three-phase Power Meter
ME631-SD
-Multifunction Record Meter
--DIN-RAIL
-Communication: MODBUS-RS485
-Power supply:85-240V
-Harmonic:51THD
-4GB SD card recorder
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-Rated current:500A,1000A,3000A,6000A(only choice one point,accept OEM)
-Rated coil ratio:50mV/kA, 85mV/kA or 333mV/kA(need to be define)
Record...
Reference: RCT-35
Brand: Meatrol
RCT-35 Rigid Rogowski coil
applications* Measuring devices, laboratory instrumentation.* Energy control and monitoring systems.* DC ripple measurement* Monitoring of harmonics and transients.* Power meter, power analyzer sensor
Reference: KRC-50
Brand: Meatrol
KRC-50 Rigid Rogowski coil
"-6 layer PCB
-Ratio:1.025mV/kA@50Hz
-Resistance: 2.07 k Ω.
-Work frequencies:1 Hz … 20 kHz
-Inner diameter [ mm ] 48
-Outer diameter [ mm ] 96
-Thickness [mm] 28
-Output Method:Screw\SR\2 IN 1
-Accuracy:±0.5%(temperature drift:200ppm/C)
-linearity:0.2%(from 1% to 100% of rated )
-Position error:±1%"
You might also like
Reference: ME231
Brand: Meatrol
ME231 Three-phase Multifunctional Smart Meter MEATROL
ME231 Multifunction Smart Meter
DIN-RAIL
Communication: MODBUS-RS485
Power supply: 85-240V
Harmonic: 50 times meanwhile Harmonic display
Without recorder
6 Tariff
One relay output, one digital input
Connect:rogowski coil and 333mV Cts with VT up to 500kV
Rated current:10A,100A,500A,1000A,3000A,6000A(Widely adapted to a variety of Rogowski coil and can be...
Reference: Mi550
Brand: Meatrol
Mi550 Portable Three Phase Power Quality Analyzer
Mi550 Portable Three Phase Electrical Power Quality Analyzer Externally Connected with Open Type Rogowski Coilor voltage CT, can perform cable testing without dismantling, simplify testing steps, save construction costs,and is more suitable for engineering testing as well as system distribution inspection and maintenance.
Reference: ME440-No Rogoswki coils
Brand: Meatrol
ME440 Polyphase Power Analyzer with Rogowski Coils MEATROL
INCLUDED 5PCS voltage clamp
-Power supply:2900mAh lithium battery or 5V DC
-Harmonic:51THD
-16GB memory,USB-DISK download data
-Modbus-TCP communication
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-3 Rated current selectable:600A/3kA/6kA
600A MRC-36 (50mV/kA@50Hz)
3000A NRC-150 (85mV/kA@50Hz)
6000A NRC-200 (50mV/kA@50Hz)
-Current...
Reference: ME531
Brand: Meatrol
ME531 Rogowski Multifunction Data collector
ME531 Rogowski Multifunction Data collector
-Multifunction Data collector
-DIN-RAIL NO LCD
-Communication: MODBUS-RS485
-Power supply:85-240V
-Harmonic:51THD
-2*digital output ,2*digital input,
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-5 Rated current selectable:100A/600A/1kA/3kA/6kA
100A MRC-24 (50mV/kA@50Hz)
600A MRC-36 (50mV/kA@50Hz)...
Reference: ME237
Brand: Meatrol
ME237 Three-phase Multifunction Smart Meter
DISCONTINUED
Three-phase Multifunctional Panel Meter
Reference: ME437-SD
Brand: Meatrol
ME437-SD Three-phase Power Meter
Connectivity advantages
MODEL
ME437-SD
Support Extra sensor
333mV CTRogowski coil
Programmable digital output
Relay
I/O function
1*digital output
Power
85~265V AC/DC
Storage
4GB SD card(Max 4GB)(save intervals 1mins ]
Reference: ME238
Brand: Meatrol
ME238 Three-phase multifunctional smart meter With RJ45 Easy Connection
The ME238 three-phase multifunctional panel meter
Sensors compatible with this model: STP-5
Reference: STP-5
Brand: Meatrol
3 in 1 RJ45 port Current Sensor STP ME238
Advantage• Calibrated to 0.5%• Much easy to install through RJ45• Easy to fixed on bus-bar or cable by cable ties• Very competitive priceRelated ProductsOnly for ME238
INCLUDED 4PCS voltage clamp
-Power supply:4*AA battery or 5V DC
-Harmonic:51THD
-4GB SD card recorder
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-5 Rated current selectable:100A/600A/1kA/3kA/6kA 100A MRC-24 (50mV/kA@50Hz)
600A MRC-36 (50mV/kA@50Hz)
1000A NRC-100 (85mV/kA@50Hz)
3000A NRC-150 (85mV/kA@50Hz)
6000A NRC-200 (50mV/kA@50Hz)
-Current clamp:10A(100mA～10A): ST08 (320mV/10A)
-Voltage,Current,Harmonic,Demand,Power factor,Frequency,Max/Min value,active reactive apparent power and energy,Unbalance,Angle. Accessories:4pcs voltage clamp,adaptor,SD card.
(PRICE NOT INCLUDED BOX AND ROGOWSKI COIL, CURRENT CLAMP)