- New
Reference: 10HS ECHO - 5Mts
10HS ECHO DECAGON Soil Moisture Sensor (Large Volume)
Soil Moisture Sensor from Decagon Devices.
- APPLICATIONS
- CATALOGS
- PRODUCTS
- BROWSE BY MEASUREMENT
- 4-20mA
- ABSOLUTE PRESSURE
- AC CURRENT
- AIR DIRECTION
- AIR QUALITY
- AIR TEMPERATURE
- AMPERES (A)
- BAROMETRIC PRESSURE
- CARBON DIOXIDE
- Color / Colorimeter
- COMPRESSED AIR
- COMPRESSED AIR FLOW
- CONDUCTIVITY
- DC CURRENT
- DENDROMETERS
- DEW POINT
- DIFFERENTIAL PRESSURE
- DUST SENSOR
- ELECTRICAL CONDUCTIVITY (SOIL)
- ELECTRICAL CONDUCTIVITY (WATER)
- ELECTRICAL NETWORK ANALYZERS
- ENGINE ON/OFF
- EVAPOTRANSPIRATION
- GAUGE PRESSURE
- ILLUMINANCE
- KILOWATT HOURS (kWh)
- KILOWATTS (kW)
- LEAF MOISTURE
- LIGHT INTENSITY
- NOISE
- OXYGEN
- PAR RADIATION
- PARTICLE COUNTERS
- PH
- PULSE INPUT
- RAINFALL
- RELATIVE HUMIDITY
- REMOTE WATER LEVEL MONITORING
- SALINITY
- SOIL HUMIDITY
- SOIL TEMPERATURE
- SOIL WATER POTENTIAL
- SOLAR RADIATION
- TEMPERATURE
- THERMOCOUPLE
- UV RADIATION
- VELOCIDAD AIRE
- WATER FLOW
- WATER LEVEL
- WATER PRESSURE
- WATER TEMPERATURE
- WIND
- BY ENVIRONMENT
- BY TYPE
- WEATHER STATIONS
- BROWSE BY MEASUREMENT
Reference: BASE-U-4
BASE-U-4 - HOBO Optical USB Base Station
A splash resistant base station and couplers used to download data from any HOBO data logger with an optical USB interface.
Reference: UA-002-64
Brand: ONSET
UA-002-64 HOBO Pendant Temperature/Light 64K Data Logger
A miniature, value-priced, waterproof data logger for temperature and light monitoring applications; stores 52K measurements.
IMPORTANT INFORMATION
Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1).
HOBOware Pro is required when using the HOBO Waterproof Shuttle. See compatible items below.
Reference: U20L-02-KIT
Brand: ONSET
U20L-02, U-DTW-1, BHW-PRO GEOCONTROL, S.A.
U20L-02 plus U-DTW-1plus BHW-PRO
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
DS1922E-F5 High-Temperature Logger iButton, 8KB Datalog Memory
DS1922E-F5 High-Temperature Logger iButton
Applications
High-Temperature Logging (Process Monitoring, Industrial Temperature Monitoring)
Steam Sterilization
-
PAYMENT METHODS
GTA Globe Thermometer Temperature Sensor
Sensor for measuring heat-induced temperature on a blackbody.
Compact and robust, made of random weave with protective treatment against oxidizing agents. Compliant with WMO Annex 8 standards for environmental monitoring applications. Easy to install and interface with any data logger (4 cables included). The sensor is equipped with electrical protections and is available with different signal sources.
Description
- Matt black copper globe thermometer with Pt100 1/3DIN 4 wires
- Instrument compliant with WMO standard with platinum Pt100 transducer
- Copper body for outdoor use with limited dimensions and weight: Ø 150 mm
- Measuring range: -40° ÷ +60° C
- Resolution: 0.01°C
- Accuracy: DIN 43760 1/3DIN (±0.1°C at 0°C)
- Response time: <10 s
- Operating conditions: -50° ÷ +80° C, IP67 protection
- Output signal: Pt100 (100Ω at 0° C), (0÷2Vdc, 4÷20mA, digital RS485 with Modbus command line protocol, on request with MCS option)
- Power supply: 10÷30Vdc
Product Details
GTA Sensor de temperatura
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
Reference: SP-110-SS
Brand: Apogee Instruments
SP-110-SS Self-Powered Silicon Cell Pyranometer
El SP-110 es un sensor analógico autoalimentado con una salida de 0 a 400 mV.
Reference: 100.053
Brand: PRONAMIC
100.053 Small Rain Sensor with Tipping Bucket Technology
Small Rain Sensor with Tipping Bucket Technology
Small and functional rain gauge that measures the amount of rain falling using an automatic tilting bucket. Connects to any datalogger or pulse counter.
Reference: H722LC
Brand: VERIS
H722LC Current Transduce Veris
The Hawkeye 722LC provide accurate load trending information with a proportional 0 to 5 VDC output signal. Slide-switches provide easy field selection of monitored amperage range without jumpers
Self-powered analog current sensor simplifies installation
No external power required for sensor
Factory calibrated ranges for increased flexibility and...
Reference: LI19
Brand: Hukseflux
LI19 Hand-Held Read-Out Unit / Data Logger
LI19 is a high accuracy handheld read-out unit / datalogger. It is used to make mobile measurements, for short term datalogging (as a static logger), and as an accurate millivolt amplifier directly connected to a PC. LI19 can be used with a variety of sensors.
LI19’s most common application is with heat flux- and solar radiation sensors. LI19 battery...
Reference: FS4408-UI-A51-X
Brand: FUEHLER SYSTEME
FS4408-UI-A51-X Air Quality Transducer for Particulate Matter/Particles for Surface Mounting, 0-10 V or 4-20 mA
Output PM2.5/PM10 0-10 V, 4-20 mA
0-10 V, 4-20 mA
Equipment without Display
Measurement range PM2.5/PM10 0 µg/m³ ... 1000 µg/m³
Reference: S9.4
Brand: Meatrol
S9.4 Waterproof Integrator
The S9.4 is a waterproof Rogowski coil integrator combined with a power meter or PLC, in a plastic housing, directly powered of the electrical network.
-Rated input::100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)
-Rated output:4-20mA
-Rated coil ratio:50mV/kA or 85mV/kA(need to be define)
-Accuracy:±0.5%(from 1% to 100%)
-Bandwidth:5Hz to 20KHz...
Reference: FS1309-MBR-A31-X
Brand: FUEHLER SYSTEME
FS1309 Oxygen Transducer for Surface Mounting, Modbus RTU
FS1309 Oxygen Transducer for surface mounting, Modbus RTU
The device is designed for indoor use or in protected outdoor areas.
0...25% vol. optional 0...100% vol.
Modbus RTU, relay
LCD-Display
hinge lock technology
Reference: U26-GUARD-2
Brand: ONSET
U26-GUARD-2 Antifouling Protective Guard
U26-GUARD-2 Antifouling Protective Guard
Reference: UA-003-6
Brand: ONSET
UA-003-64 HOBO Pendant Event Data Logger
UA-003-64 Registrador de datos de eventos colgante HOBO
Reference: 11060049-5x5
Brand: FUEL CELL
11060049 Platinum on Vulcan - Carbon Cloth Electrode (W1S1011) 0.2 mg/cm² 20%
A Low-cost electrode utilizing a woven carbon cloth substrate and a 20% Platinum on Vulcan Carbon support catalyst. This low loading is designed for cost sensitive applications and is suitable for electrochemical systems needing low amounts of Platinum to support the reaction. This electrode is perfect for Hydrogen/Air Fuel Cell applications where the...
Reference: 100.073 - acc.
Brand: PRONAMIC
100.073 Tower - Rain and Precipitation Sensor
100.073 Tower - Rain and Precipitation Sensor
Tower rain gauge that measures the amount of rain fallen using a tilting bucket with automatic emptying. Connects to any datalogger or pulse counter.
Reference: TR-50U2
Brand: TandD
TR-50U2 USB Compact Communication Interface for TR-5i Series Loggers
TandD TR-50U2
Comm Interfaces: USB, Optical
Power: USB Bus Power
Operating environment:
Temperature: -10 to 60°C
Humidity: less than 90%RH (No condensation)
Do not use if the Data Logger is wet.
Dimensions: H:80mm × W:56mm × D:16.5mm
Accessories: USB Communication Cable, Software(CD-ROM), Manual
The TR-50U2 is a communication cradle necessary for...
Reference: RK210-01A-A-A-B
Brand: RIKA SENSORS
RK210-01 Solar Illuminance Sensor
RK210-01 Illuminance Sensor
Range 0-2000lux,0-20klux,0-200klux
Spectral range 380-730nm
Supply 12-24VDC
Output 4-20mA,0-5V,0-10V,RS485
Display LCD
Reference: U24-002-C
Brand: ONSET
U24-002-C HOBO Salt Water Conductivity/Salinity Data Logger
This logger requires HOBOware Pro software and either a U-DTW-1 Waterproof Shuttle or the Base-U-4 Optic USB Base Station for configuration and data offload.
Reference: ME435
Brand: Meatrol
ME435 Portable Multifunctional Three-Phase Power Analyzer with Rogowski Coils MEATROL
INCLUDED 4PCS voltage clamp
-Power supply:4*AA battery or 5V DC
-Harmonic:51THD
-4GB SD card recorder
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-5 Rated current selectable:100A/600A/1kA/3kA/6kA 100A MRC-24 (50mV/kA@50Hz)
600A MRC-36 (50mV/kA@50Hz)
1000A NRC-100 (85mV/kA@50Hz)
3000A NRC-150 (85mV/kA@50Hz)
6000A NRC-200 (50mV/kA@50Hz)...
Reference: DTP.1
Brand: Meatrol
DTP.1 Integrator for Rogowski Coils
DTP.1 Three phase DIN-RAIL 333mV output Integrator
-Rated input:100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)
-Rated output:333mV rms
-Rated coil ratio:50mV/kA or 85mV/kA(need to be define)
-Accuracy:±0.5% (from 1% to 100% of rated )
-Bandwidth:30Hz to 5KHz
-Power supply:12VDC
Noted:each 100A only output maximum 1V
Sensor for measuring heat-induced temperature on a blackbody.
Compact and robust, made of random weave with protective treatment against oxidizing agents. Compliant with WMO Annex 8 standards for environmental monitoring applications. Easy to install and interface with any data logger (4 cables included). The sensor is equipped with electrical protections and is available with different signal sources.