
Reference: 10HS ECHO - 5Mts
Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: VH400-2M
Brand: VEGETRONIX
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
The standard low-cost electrode utilizing a carbon fiber paper substrate and a 60% Platinum on Vulcan Carbon support catalyst. This low loading is designed for cost sensitive applications and is suitable for electrochemical systems needing low amounts of Platinum to support the reaction. This electrode is perfect for Hydrogen/Air Fuel Cell applications where the extra cost of the higher loading GDE may not be justified. The Gas Diffusion Layer (GDL) used is Sigracet 22 BB which is 215 microns thick. Other GDL materials are also available by custom request, as are custom sizes and loadings.
Includes a Nafion Post Coat for improved water management and adhesion to the membrane.
Catalyst Type: 60% Platinum on Vulcan (Carbon)
Loading: 0.5 mg/cm²
Gas Diffusion Layer Properties
Material Type: Carbon Fiber Paper - Sigracet 22 BB
Thickness: 215 microns +/- 20 microns
Basic Weight (g/m²): 70 +/- 15 g/m²
Thermal Conductivity: 0.30 W(m^-1)(K^-1)
Bending Stiffness (MD/TD): 1.5 / 0.9 N mm
Electrical Resistivity (through plane): < 10 mΩcm² (milliohms cm²)
Water Contact Angle (MPL): > 130°
Roughness (MPL side): 7.2 µm
Impurities (Fe, Co, Ni): < 10 ppm
Tensile Strength: 6.9 / 4.6 (MD/TD)
Substrate PTFE Treatment: 5 wt%
Microporous Layer: Yes, on catalyzed side
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: K-11
Brand: HORIBA LAQUAtwin
Reference: U0141TM
Brand: COMET
Reference: ME435
Brand: Meatrol
Reference: Y031H
Brand: HORIBA LAQUAtwin
Reference: PX3PLN02S
Brand: VERIS
Reference: LAQUAtwin pH-11
Brand: HORIBA LAQUAtwin
Reference: TRC-24
Brand: Meatrol
Reference: S-BPA-CM10
Brand: ONSET
Reference: BH-GSP
Brand: BOSEAN
Reference: TR-72nw
Brand: TandD
Reference: S-RGF-M002
Brand: ONSET
Reference: M1140
Brand: COMET
Reference: M-TPA-KIT
Brand: ONSET
Reference: U3631M
Brand: COMET
The standard low-cost electrode utilizing a carbon fiber paper substrate and a 60% Platinum on Vulcan Carbon support catalyst. This low loading is designed for cost sensitive applications and is suitable for electrochemical systems needing low amounts of Platinum to support the reaction. This electrode is perfect for Hydrogen/Air Fuel Cell applications where the extra cost of the higher loading GDE may not be justified. The Gas Diffusion Layer (GDL) used is Sigracet 22 BB which is 215 microns thick. Other GDL materials are also available by custom request, as are custom sizes and loadings.
Includes a Nafion Post Coat for improved water management and adhesion to the membrane.
check_circle
check_circle