All best sellers
  • PAYMENT METHODS

  • New
MO-200 Oxygen Sensor with Handheld Meter MYJ
  • MO-200 Oxygen Sensor with Handheld Meter MYJ
  • MO-200 Oxygen Sensor with Handheld Meter MYJ
  • MO-200 Oxygen Sensor with Handheld Meter MYJ
  • MO-200 Oxygen Sensor with Handheld Meter MYJ
  • MO-200 Oxygen Sensor with Handheld Meter MYJ
  • MO-200 Oxygen Sensor with Handheld Meter MYJ
  • MO-200 Oxygen Sensor with Handheld Meter MYJ
  • MO-200 Oxygen Sensor with Handheld Meter MYJ

MO-200 Oxygen Sensor with Handheld Meter

MO-200
Description

Apogee line quantum sensors measure a spatial average of photosynthetically active radiation (PAR). The MQ-301X has a separated sensor bar with 10 sensors connected to a hand-held meter via cable. The sensor housing design features an integrated bubble level and is fully potted making the sensor weatherproof. Typical applications include photosynthetic photon flux density (PPFD) measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy (transmitted) PPFD measurements in the same environments.

The meter has a sample and log mode, and will record an integrated daily total in mol m-2 d-1. Sample mode will record up to 99 manual measurements. Log mode will power the meter on/off to make a measurement every 30 seconds. Every 30 minutes the meter will average the sixty 30 second measurements and record the averaged value to memory. The meter can store up to 99 averages, once full it will start to overwrite the oldest measurement with new ones. An integrated daily total will be recorded from the 48 averaged measurements (making a 24 hr period). Sample and log measurements can be reviewed on the LCD display or by downloading the data to a computer, however, the integrated daily total can only be viewed by downloading the data to a computer. Downloading data to a computer requires the AC-100 communication cable (a standard USB cable will not work) and ApogeeAMS software.

Specifications 

Calibration Uncertainty:± 5 %

Measurement Repeatability: Less than 0.5 %

Non-stability (Long-term Drift): Less than 2 % per year

Non-linearity: Less than 1 % (up to 2500 µmol mˉ² sˉ¹ )

Response Time: Less than 1 ms

Field of View: 180˚

Spectral Range: 370 nm to 650 nm (wavelengths where response is greater than 50 % of maximum)

Directional (Cosine) Response: ± 5 % at 75˚ zenith angle

Temperature Response: -0.04 % per C

Operating Environment: -10 to 60 C; 0 to 100 % relative humidity; sensor can be submerged in water up to 30 m

Meter Dimensions: 113.9 mm height, 59.9 mm width

Sensor Dimensions: 616.4 mm length, 13.6 mm height, 16.5 mm width

Mass: 310 g

Cable: 2 m of shielded, twisted-pair wire with TPR jacket (high water resistance, high UV stability, flexibility in cold conditions), additional cable available

Warranty:4 years against defects in materials and workmanship

Product Details
MO-200
Attachments
Download
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:

Reference: S-SMC-M005

Brand: ONSET

S-SMC-M005 EC5 Soil Moisture Smart Sensor

(0)
Small area of influence An affordable soil moisture smart sensor with a two-tine design for easy installation; integrates the field-proven ECH2O™ EC-5 Sensor and a 12-bit A/D. An affordable soil moisture smart sensor with a two-tine design for easy installation; integrates the field-proven ECH2O™ EC-5 Sensor and a 12-bit A/D.

Reference: HF03-LI19

Brand: Hukseflux

HF03-LI19 - HEAT FLUX SENSOR

(0)
Portable heat flux sensor, with read-out unit / datalogger HF03 is a heat flux sensor that is applied in mobile measurements. It is combined with LI19, a high accuracy handheld read-out unit / datalogger. The combination HF03- LI19 is typically used to study heat flux levels of flares and fires, and to verify the performance of permanently installed flare...

Reference: UG-5-AFR-24V

Brand: FUEHLER SYSTEME

UG-5-AFR-24V Smoke Detector for Air Ventilation Ducts

(0)
UG-5-AFR-24V Smoke Detector for Air Ventilation Ducts VdS, CE, DIBt Built-in control unit (stand alone) 2 alarm relays, 1 service alarm, 1 system error relay, 1 low-flow relay, Modbus Quick and simple installation Flow indicator with high sensitivity 4 install positions 0, 90, 180 and 270° Test hole in cover Included  ST2 - Venturi pipe for duct smoke...

Reference: LAQUAtwin pH-22

Brand: HORIBA LAQUAtwin

LAQUAtwin pH-22 - Pocket Water Quality Meters

(0)
Specs: Range: 0 to 14 pH Resolution: 0.01 pH Accuracy: ±0.01 pH mV: ±650mV/1mV Calibration: 3 points Standard solution pH4.01 Standard solution pH7.00 Replacement electrode also available Ref.: 86129 The pH-22 pH meter is supplied with: 2 CR2032 batteries 1 pipette. Instruction manual and quick guide. Storage case. pH4 calibration solution (14 ml). pH7...

Follow us on Facebook