VH400 Soil Moisture Sensor Probe Specifications
Power consumption: < 13mA
Supply Voltage: 3.5V to 20 VDC.
Dimensions See drawing.
Power on to Output stable: 400 ms
Output Impedance: 10K ohms
Operational Temperature: -40ºC to 85ºC
Accuracy at 25°C: 2%
Output: 0 to 3V related to moisture content
Shell Color: Red
Voltage Output Curves: Curves, Piecewise...
A miniature, value-priced, waterproof data logger for temperature and light monitoring applications; stores 52K measurements.
IMPORTANT INFORMATION
Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1).
HOBOware Pro is required when using the HOBO Waterproof Shuttle. See compatible items below.
Versatile Solution Designed to meet diverse operational and data management needs, even in the most challenging environments. Configurable as a GNSS Base Station, Gateway, Repeater, or Total Station Control Box, ensuring a perfect fit for any monitoring setup.
Flexible Powering and Connectivity Multiple connectivity options include LTE, Wi-Fi, and Ethernet. Solar or A/C power options offer flexibility.
Seamless Integration with GeoExplorer Efficient data communication with a multitude of sensor types, providing consistent performance and adaptability.
Control Box General Specifications
Enclosure Dimensions
400mm x 352mm x 197mm
Enclosure Material
Fiberglass Reinforced Polyester
Connectors
TNC (F) for GNSS Antenna
N (F) for Radio Antenna
Ethernet RJ45
External Battery
AC Power
Solar Power
Serial DB9 (Optional)
Grounding Lug
Mounting
Pole and Wall
Temperature
Operating: -40°C to +60°C
Storage:-40°C to +60°C
Environmental Protection
Ingress Protection (IP65)
FLP200
Power
Nominal Voltage: 12V (DC)
Input Voltage Range: 9-30V (DC)
Power Consumption: 1.6 – 1.9W
Switched Power Output: 3 channels
Temperature
Operating: -40 to +65°C
Storage: -45 to +80°C
Ports
Firmware Update: USB-C
Serial IO: 2 x RS232
Ethernet: RJ45
Bus: Full-Duplex RS485
Size
99 × 52 × 99mm
Weight
248g
Housing
Polyamide, green, inflammability class VO (UL94), Din-rail mountable
Supported Modules
SER100 (Serial Expansion) (High Precision GNSS)
GPM300 (High Precision GNSS)
Other Features
Remote firmware updates available via GeoExplorer software
Internal hardware power management
Watchdog timer support
Full GeoServer / GeoExplorer Support
Radio
900MHz (North America, Brazil, Australia)
868MHz (EU, Africa)
GPM300
Power
Bus-powered through the FLP200
Power Consumption: 2.1W (approx.)
Temperature
Operating: -40°C to +65 °C
Storage: -45°C to +80 °C
Ports
Firmware update: USB-C
Size
99 × 26 × 99mm
Weight
144g
FLL400
Power
Nominal Voltage: 12V (DC)
Input Voltage Range: 9 – 30V (DC)
Power Consumptopn: ≈1.5W
Temperature
Operating: -40 to +65°C
Storage: -45 to +80°C
Ports
Firmware Update: USB-C
GPIO: 1 input
Bus: Full-Duplex RS485
Size
99 × 26 × 99mm
Weight
124g
Housing
Polyamide, green, inflammability class VO (UL94), Din-rail mountable
Radio
900MHz (North America, Brazil, Australia)
868MHz (EU, Africa)
Product Details
Caja de Control Navstar
Comments (0)
Grade
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
The Hawkeye 722 provide accurate load trending information with a proportional 0 to 5 VDC output signal. Slide-switches provide easy field selection of monitored amperage range without jumpers. Self-powered analog current sensor simplifies installation No external power required for sensor Factory calibrated ranges for increased flexibility and...
57080133 40% Palladium supported on Vulcan XC-72 (carbon).
Suggested Applications
Palladium is most commonly used for Proton Exchange Membrane Fuel Cell (PMFC) applications.
W0932 IoT Wireless Thermometer with Three-Channels
Included in delivery:
W0932
Instruction manual
Traceable calibration certificate
1 3.6V lithium battery
COMET Cloud for 1 year
EXTERNAL PROBES ARE NOT INCLUDED IN DELIVERYWhen installing into the refrigerator, we recommend acquiring the combination of the sensor and an external temperature probe. In...
U22-001 HOBO Water Temperature Pro v2 Data Logger
A durable water temperature data logger with 12-bit resolution; for depths up to 400 feet.Important InformationRequires HOBOware software and either an Optic USB Base Station or HOBO Waterproof Shuttle (U-DTW-1). HOBOware Pro is required when using the HOBO Waterproof Shuttle.
A miniature, value-priced, waterproof data logger for temperature and light monitoring applications; stores 52K measurements.
IMPORTANT INFORMATION
Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1).
HOBOware Pro is required when using the HOBO Waterproof Shuttle. See compatible items below.
TMC6-HC Stainless Steel Temperature Probe (6' cable) Sensor
A food-grade stainless-steel temperature probe with pointed tip for use with HOBO U series loggers, UX120-006M loggers, or ZW series wireless data nodes. Accuracy and resolution vary in accordance with attached logger model. Measurement range is -40° to 100°C (-40° to 212°F) in air or water....
U8415 CO2 monitor with built-in carbon dioxide sensor
CO2 monitor - carbon dioxide level detector. Although carbon dioxide is invisible and odourless, increased CO2 content in the room leads to fatigue and decreased mental concentration.
Battery powered device U8415 with external power (optional accessories) is designed to indication of CO2 concentration...
A high-performance, LCD display data logger to measure and record temperature, current, CO2, voltage, and more, for building performance monitoring applications.
IMPORTANT INFORMATION
External sensors sold separately. Requires HOBOware software and a USB cable. (Note: A USB-A to USB-B mini cable is included w/HOBOware Pro USB Drive software purchase).
S-THC-M002 Sensor Inteligente de Temperatura y Humedad Relativa (cable de 2 m)
A temperature/relative humidity sensor designed to work with all HOBO data loggers that accept Smart Sensors. All sensor parameters are stored inside the Smart Sensor, which automatically communicates configuration data information to the logger without any programming,...
