
Reference: 10HS ECHO - 5Mts
Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: VH400-2M
Brand: VEGETRONIX
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
Product Features
Manufactured from high strength, heat treated, stress relieved steel with precision bearing surfaces
Overview
Vibrating wire load cells are available in solid and annular styles to monitor compressive loads. Load elements are manufactured from high strength, heat treated and stress relieved steel with precision ground bearing surfaces. Overall machined, high strength combination load plates are recommended to provide a smooth, parallel bearing surface and distribute the load.
Solid style cells incorporate 3 to 6 vibrating wire tension sensing elements mounted parallel to the longitudinal axis of the cell.
Annular cells incorporate 3 to 6 vibrating wire tension sensors, mounted parallel to the longitudinal axis, equidistant around the circumference.
With the multi-sensor configuration, accurate readings are possible under slightly eccentric loading conditions as the sensors are read individually. On multi-strand anchors, it is possible to tension the strands uniformly by monitoring the load on each sensor as appropriate.
The power cable running to the reader may be hardwired to the cell or connected via a metal military-style bayonet connector.
ITEM | SPECIFICATION |
Capacity | 445 kN to 4450 kN (100,000 to 1,000,000 lbs) |
Overrange Capacity | 150% full scale |
Sensitivity | 0.01% full scale |
Accuracy | 0.5% full scale |
Temperature Range | -20°C to +80°C |
Material | High tensile, stress relieved steel |
Hole Size | As requested |
Vibrating wire load cells are commonly used for:
Vibrating Wire Load Cell Ordering Information
Environmental Data
Accessory Ordering Information
ITEM DESCRIPTION
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: PX3DLX01S
Brand: VERIS
Reference: M-TPB
Brand: ONSET
Reference: TR43A
Brand: TandD
Reference: 514‐22
Brand: HORIBA LAQUAtwin
Reference: S-RGE-M002
Brand: ONSET
Reference: LAQUAtwin Ca‐11C‐1
Brand: HORIBA LAQUAtwin
Reference: DT2055B
Brand: RST
Reference: SRC-100
Brand: Meatrol
Reference: MQ31
Brand: Meatrol
Reference: ACCUPAR LP-80
Reference: RTR502B
Brand: TandD
Reference: FS1309-MBR-A31-X
Brand: FUEHLER SYSTEME
Reference: PX3PXX02S
Brand: VERIS
Reference: TR-72nw-S
Brand: TandD
Reference: PX3ULX05
Brand: VERIS
Product Features
Manufactured from high strength, heat treated, stress relieved steel with precision bearing surfaces
check_circle
check_circle