
Reference: 10HS ECHO - 5Mts
Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: VH400-2M
Brand: VEGETRONIX
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
U5841 Data logger for 3 voltage inputs 0-10V and 1 two-state input
Datalogger is designed to record 3 voltage inputs and 1 binary input.
The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via USB-C.
In case of exceeded set limits alarms are indicated by LED, LCD and acoustically by built-in beeper.
Recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
Technical data
Measured value
Voltage
Two-state signal
VOLTAGE INPUT
Measuring range 0 to 10 V DC
Accuracy ±10 mV
Input resistance approx. 130 kΩ
BINARY INPUT
Parameters of the voltage contact „L“ level input voltage:< 0,8 V(*);
„H“ level input voltage:> 2 V;
Minimum voltage applicable:0 V;
Maximum voltage applicable:+30 V DC
Parameters of the voltage-free contact Contact resistance in „switched-on“ state:< 10 kOhm;
Contact resistance in the „switched-off“ state:> 2 MOhm;
Contact voltage in the „switched-off“ state:ca 3 V;
Minimum state duration necessary for latching the state:1s
GENERAL TECHNICAL DATA
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: U5841G
Brand: COMET
Reference: PQ-510
Brand: Apogee Instruments
Reference: TR-55i-P
Brand: TandD
Reference: H721LC
Brand: VERIS
Reference: U7844
Brand: COMET
Reference: ExpressThermo
Brand: iBUTTON MAXIM INTEGRATED
Reference: 57080133 1gr
Brand: FUEL CELL
Reference: SU-220
Brand: Apogee Instruments
Reference: MX2001-04-SS
Brand: ONSET
Reference: U20L-01
Brand: ONSET
Reference: 57080237 1gr
Brand: FUEL CELL
Reference: S1SA1S
Brand: MAE
Reference: RK300-02A
Brand: RIKA SENSORS
Reference: S050
Brand: HORIBA LAQUAtwin
Reference: S010 (3200459834)
Brand: HORIBA LAQUAtwin
Reference: U26-001
Brand: ONSET
U5841 Data logger for 3 voltage inputs 0-10V and 1 two-state input
Datalogger is designed to record 3 voltage inputs and 1 binary input.
The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via USB-C.
In case of exceeded set limits alarms are indicated by LED, LCD and acoustically by built-in beeper.
Recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
check_circle
check_circle