Reference: STP-5
Brand: Meatrol
3 in 1 RJ45 port Current Sensor STP ME238
Advantage• Calibrated to 0.5%• Much easy to install through RJ45• Easy to fixed on bus-bar or cable by cable ties• Very competitive priceRelated ProductsOnly for ME238
- APPLICATIONS
- CATALOGS
- PRODUCTS
- BROWSE BY MEASUREMENT
- 4-20mA
- ABSOLUTE PRESSURE
- AC CURRENT
- AIR DIRECTION
- AIR QUALITY
- AIR TEMPERATURE
- AMPERES (A)
- BAROMETRIC PRESSURE
- CARBON DIOXIDE
- COMPRESSED AIR
- COMPRESSED AIR FLOW
- CONDUCTIVITY
- DC CURRENT
- DEW POINT
- DIFFERENTIAL PRESSURE
- DUST SENSOR
- ELECTRICAL CONDUCTIVITY (SOIL)
- ELECTRICAL CONDUCTIVITY (WATER)
- ELECTRICAL NETWORK ANALYZERS
- ENGINE ON/OFF
- EVAPOTRANSPIRATION
- GAUGE PRESSURE
- KILOWATT HOURS (kWh)
- KILOWATTS (kW)
- LEAF MOISTURE
- LIGHT INTENSITY
- NOISE
- PAR RADIATION
- PARTICLE COUNTERS
- PH
- PULSE INPUT
- RAINFALL
- RELATIVE HUMIDITY
- REMOTE WATER LEVEL MONITORING
- SALINITY
- SOIL HUMIDITY
- SOIL TEMPERATURE
- SOIL WATER POTENTIAL
- SOLAR RADIATION
- TEMPERATURE
- THERMOCOUPLE
- UV RADIATION
- VELOCIDAD AIRE
- WATER FLOW
- WATER LEVEL
- WATER PRESSURE
- WATER TEMPERATURE
- WIND
- BY ENVIRONMENT
- BY TYPE
- WEATHER STATIONS
- BROWSE BY MEASUREMENT
Suppliers
No supplier
-
PAYMENT METHODS
D1.1 AC output integrator on DIN RAIL
D1 is an Industrial Rogowski coil integrator for installation in a distribution box, in a plastic housing with 1 DIN-RAIL module, powered directly from the network.
-Rated input::500A,1kA,3kA,6kA(only choice one point,accepted OEM)
-Rated output:0-10 VAC;
-Rated coil ratio:50mV/kA or 85mV/kA(need to be define)
-Accuracy:±1%(from 1% to 100%)
-Bandwidth:5Hz to 20KHz
-Power supply:12V;24V(default) DC
Description
D1.1 can be combined with any model and size of Y-FCT or FCT Rogowski coils.
Available values are: 0-5V DC, 0-5V AC, 4-20mA AC.
On request, the input value can be customized according to the application.
The D1 and Rogowski coil are a very flexible system, suitable for high power load analysis, impulse current monitoring, DC ripple measurement, etc.
Due to its specific characteristics, the flexible Rogowski coil is an extremely convenient solution for current measurement and can be used in numerous cases where the traditional current transducer is not the appropriate solution.
Product Details
D1.1
New
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
Reference: STC-24
Brand: Meatrol
SCT-24 split-core current sensors transform an AC input current up to(100A/200A/300)Amps to a 0.333 volt or 5 amp output
Rated current :100A/200A/300A(diameter 24mm)
Rated output :333mV/5A
Cable length:1meters
S1-White S2-Black
Reference: ME435
Brand: Meatrol
ME435 Portable Multifunctional Three-Phase Power Analyzer with Rogowski Coils MEATROL
INCLUDED 4PCS voltage clamp
-Power supply:4*AA battery or 5V DC
-Harmonic:51THD
-4GB SD card recorder
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-5 Rated current selectable:100A/600A/1kA/3kA/6kA 100A MRC-24 (50mV/kA@50Hz)
600A MRC-36 (50mV/kA@50Hz)
1000A NRC-100 (85mV/kA@50Hz)
3000A NRC-150 (85mV/kA@50Hz)
6000A NRC-200 (50mV/kA@50Hz)...
Reference: ZRC-50
Brand: Meatrol
ZRC-50 Thin Flexible Rogowski coil
* High linearity from 1A to 100kA*Wide dynamic range*Very useful with large or awkwardly shaped conductors or in places with limited access*There is no danger from the open secondary circuit*Not damaged by large overloads*Non-intrusive, no power is drawn from the main grid.* Measurement uniformity at any position of the conductor within the...
Reference: ME238
Brand: Meatrol
ME238 Three-phase multifunctional smart meter With RJ45 Easy Connection
The ME238 three-phase multifunctional panel meter
Sensors compatible with this model: STP-5
Reference: STP-5
Brand: Meatrol
3 in 1 RJ45 port Current Sensor STP ME238
Advantage• Calibrated to 0.5%• Much easy to install through RJ45• Easy to fixed on bus-bar or cable by cable ties• Very competitive priceRelated ProductsOnly for ME238
Reference: ME-337
ME-337 Rogowski Smart Panel Meter
BENEFIT FOR THE CUSTOMER:*Direct connection with open Rogowski coils* Three-phase/Single-phase*Phase N Current measurement*6-Rate (Manual or RTC)*Display of harmonic values from 1 to 50
(PRICE NOT INCLUDED ROGOWSKI COIL)
Reference: Y-FCT-200
Brand: Meatrol
Y-FCT-200 Thin and flexible "Y" shaped Rogowski coil
* High linearity from 1A to 100kA* Wide dynamic range* Very useful with large or awkwardly shaped conductors or in places with limited access*There is no danger from the open secondary circuit* Will not be damaged by large overloads* Non-intrusive, no power is drawn from the main grid.* Measurement uniformity at any position of the conductor within the...
Reference: ME437-SD
Brand: Meatrol
ME437-SD Three-phase Power Meter
Connectivity advantages
MODEL
ME437-SD
Support Extra sensor
333mV CTRogowski coil
Programmable digital output
Relay
I/O function
1*digital output
Power
85~265V AC/DC
Storage
4GB SD card(Max 4GB)(save intervals 1mins ]
Reference: DA01
Brand: Meatrol
DA01 Integrator for Rogowski Coils
DA01
1A output Integrator
-Rated input:100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)
-Rated output:0-1A rms, 0-100mA rms
-Accuracy:±0.5% (from 1% to 100% of rated )
-Bandwidth:30Hz to 5KHz
-Power supply:12V or 24V DC(Default 24VDC)
-Maximum Burden 0.5Ω
-Maximum power 5W
Reference: MRC-16
Brand: Meatrol
MRC-16 Mini flexible Rogowski coil
Advantage*Excellent linearity*Wide dynamic range* Not damaged by large overloads* Excellent degree of rejection to the externalcurrent conductor* No danger from open-circuited secondary* Zero power consumption* Small position error* Soft and light, easy to install* Long-term stability* Wide dynamic range* IP67 protection level
Reference: DTP.1
Brand: Meatrol
DTP.1 Integrator for Rogowski Coils
DTP.1 Three phase DIN-RAIL 333mV output Integrator
-Rated input:100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)
-Rated output:333mV rms
-Rated coil ratio:50mV/kA or 85mV/kA(need to be define)
-Accuracy:±0.5% (from 1% to 100% of rated )
-Bandwidth:30Hz to 5KHz
-Power supply:12VDC
Noted:each 100A only output maximum 1V
Reference: MQ21
Brand: Meatrol
MQ21 Energy Quality Analyzer
The MQ21, the externally connected power quality analyzer with an open type Rogowski coil or a voltage CT
Reference: ME231
Brand: Meatrol
ME231 Three-phase Multifunctional Smart Meter MEATROL
ME231
-Multifunction Smart Meter
--DIN-RAIL
-Communication: MODBUS-RS485
-Power supply: 85-240V
-Harmonic: 50 times meanwhile Harmonic display
-Without recorder
-6 Tariff
-One relay output, one digital input
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-Rated current:10A,100A,500A,1000A,3000A,6000A(Widely adapted to a variety of Rogowski coil...
Reference: RCT-35
Brand: Meatrol
RCT-35 Rigid Rogowski coil
applications* Measuring devices, laboratory instrumentation.* Energy control and monitoring systems.* DC ripple measurement* Monitoring of harmonics and transients.* Power meter, power analyzer sensor
Reference: NRC- 200
Brand: Meatrol
NRC- 200 Thin Flexible Rogowski coil fixed with cable ties
"-Window size:200mm
-Section :8mm
-Rated input:6000A
-Cable length:2 meter
-Calibrated Accuracy:±0.5%(temperature drift:300ppm/C)
-Ratio:50mV/kA@50Hz
-linearity:0.2%(from 1% to 100% of rated )
-Position error:±1%"
Reference: ME131M
Brand: Meatrol
Multi-circuit Smart Energy meter ME131M
ME131 multi-circuit smart energy meter is compatible with both Rogowski coil and voltage-output split core current transformer, which could realize dismantling-free conductor test, simplify test procedures and save construction costs.
D1 is an Industrial Rogowski coil integrator for installation in a distribution box, in a plastic housing with 1 DIN-RAIL module, powered directly from the network.
-Rated input::500A,1kA,3kA,6kA(only choice one point,accepted OEM)
-Rated output:0-10 VAC;
-Rated coil ratio:50mV/kA or 85mV/kA(need to be define)
-Accuracy:±1%(from 1% to 100%)
-Bandwidth:5Hz to 20KHz
-Power supply:12V;24V(default) DC