Reference: STP-5
Brand: Meatrol
3 in 1 RJ45 port Current Sensor STP ME238
Advantage• Calibrated to 0.5%• Much easy to install through RJ45• Easy to fixed on bus-bar or cable by cable ties• Very competitive priceRelated ProductsOnly for ME238
- APPLICATIONS
- CATALOGS
- PRODUCTS
- BROWSE BY MEASUREMENT
- 4-20mA
- ABSOLUTE PRESSURE
- AC CURRENT
- AIR DIRECTION
- AIR QUALITY
- AIR TEMPERATURE
- AMPERES (A)
- BAROMETRIC PRESSURE
- CARBON DIOXIDE
- COMPRESSED AIR
- COMPRESSED AIR FLOW
- CONDUCTIVITY
- DC CURRENT
- DEW POINT
- DIFFERENTIAL PRESSURE
- DUST SENSOR
- ELECTRICAL CONDUCTIVITY (SOIL)
- ELECTRICAL CONDUCTIVITY (WATER)
- ELECTRICAL NETWORK ANALYZERS
- ENGINE ON/OFF
- EVAPOTRANSPIRATION
- GAUGE PRESSURE
- KILOWATT HOURS (kWh)
- KILOWATTS (kW)
- LEAF MOISTURE
- LIGHT INTENSITY
- NOISE
- PAR RADIATION
- PARTICLE COUNTERS
- PH
- PULSE INPUT
- RAINFALL
- RELATIVE HUMIDITY
- REMOTE WATER LEVEL MONITORING
- SALINITY
- SOIL HUMIDITY
- SOIL TEMPERATURE
- SOIL WATER POTENTIAL
- SOLAR RADIATION
- TEMPERATURE
- THERMOCOUPLE
- UV RADIATION
- VELOCIDAD AIRE
- WATER FLOW
- WATER LEVEL
- WATER PRESSURE
- WATER TEMPERATURE
- WIND
- BY ENVIRONMENT
- BY TYPE
- WEATHER STATIONS
- BROWSE BY MEASUREMENT
Suppliers
No supplier
-
PAYMENT METHODS
S1 High Accuracy integrator
The S1 is a high precision Rogowski coil integrator, in a compact shielded aluminum alloy housing, powered directly from
the main
-Rated input:100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)
-Rated output:0-10VAC333mV rms
-Rated coil ratio:50mV/kA or 85mV/kA(need to be define)
-Accuracy:±0.2%
-Bandwidth:5Hz to 20kHz
-Power supply:4-12V(default) or 24V DC
Noted:each 100A only output maximum 1V
Description
The high-precision Integrator S1 can be combined with any model and size of Y-FCT or FCT Rogowski coils.
Available values are: 0-10 VDC, 0-10 V peak, 4-20 mA.
On request, the input value can be customized according to the application.
The S1 and Rogowski coil is a very flexible system, suitable for high power load analysis, impulse current monitoring, DC
ripple measurement, etc.
Due to its specific characteristics, the flexible Rogowski coil is an extremely convenient solution for current measurement and
It can be used in several cases where the traditional current transducer is not the appropriate solution.
Product Details
S1.1
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
Reference: NRC-150
Brand: Meatrol
NRC-150 Thin Flexible Rogowski coil fixed with cable ties
"-Window size:150mm
-Section :8mm
-Rated input:3000A
-Cable length:2 meter
-Calibrated Accuracy:±0.5%(temperature drift:300ppm/C)
-Ratio:85mV/kA@50Hz
-linearity:0.2%(from 1% to 100% of rated )
-Position error:±1%"
Reference: ME-337
ME-337 Rogowski Smart Panel Meter
BENEFIT FOR THE CUSTOMER:*Direct connection with open Rogowski coils* Three-phase/Single-phase*Phase N Current measurement*6-Rate (Manual or RTC)*Display of harmonic values from 1 to 50
(PRICE NOT INCLUDED ROGOWSKI COIL)
Reference: STP-5
Brand: Meatrol
3 in 1 RJ45 port Current Sensor STP ME238
Advantage• Calibrated to 0.5%• Much easy to install through RJ45• Easy to fixed on bus-bar or cable by cable ties• Very competitive priceRelated ProductsOnly for ME238
Reference: ME131M
Brand: Meatrol
Multi-circuit Smart Energy meter ME131M
ME131 multi-circuit smart energy meter is compatible with both Rogowski coil and voltage-output split core current transformer, which could realize dismantling-free conductor test, simplify test procedures and save construction costs.
Reference: ME631-SD
Brand: Meatrol
ME631-SD Three-phase Power Meter
ME631-SD
-Multifunction Record Meter
--DIN-RAIL
-Communication: MODBUS-RS485
-Power supply:85-240V
-Harmonic:51THD
-4GB SD card recorder
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-Rated current:500A,1000A,3000A,6000A(only choice one point,accept OEM)
-Rated coil ratio:50mV/kA, 85mV/kA or 333mV/kA(need to be define)
Record...
Reference: H721HC
Brand: VERIS
H721HC Veris Current Transducer
Hawkeye 0 to 50/100/200 A Input 4 to 20 mA DC Output Analog Current Transducer, Split-Core, 0.7 in
Reference: STC-24
Brand: Meatrol
SCT-24 split-core current sensors transform an AC input current up to(100A/200A/300)Amps to a 0.333 volt or 5 amp output
Rated current :100A/200A/300A(diameter 24mm)
Rated output :333mV/5A
Cable length:1meters
S1-White S2-Black
Reference: Y-FCT-200
Brand: Meatrol
Y-FCT-200 Thin and flexible "Y" shaped Rogowski coil
* High linearity from 1A to 100kA* Wide dynamic range* Very useful with large or awkwardly shaped conductors or in places with limited access*There is no danger from the open secondary circuit* Will not be damaged by large overloads* Non-intrusive, no power is drawn from the main grid.* Measurement uniformity at any position of the conductor within the...
Reference: ME237
Brand: Meatrol
ME237 Three-phase Multifunction Smart Meter
Three-phase Multifunctional Panel Meter
Reference: ME231
Brand: Meatrol
ME231 Three-phase Multifunctional Smart Meter MEATROL
ME231
-Multifunction Smart Meter
--DIN-RAIL
-Communication: MODBUS-RS485
-Power supply: 85-240V
-Harmonic: 50 times meanwhile Harmonic display
-Without recorder
-6 Tariff
-One relay output, one digital input
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-Rated current:10A,100A,500A,1000A,3000A,6000A(Widely adapted to a variety of Rogowski coil...
Reference: SRC-100
Brand: Meatrol
SRC-100 333mV high Sensitivity Thick Rogowski coil
* High linearity from 1A to 100kA* Wide dynamic range* Very useful with large size or awkward shaped conductors or in places with limited access* No danger from open-circuited secondary* Does not saturate with overcurrent and short circuits* Non-intrusive, no power drawn from the main* Very low positioning error* Excellent degree of rejection to the...
Reference: Mi550
Brand: Meatrol
Mi550 Portable Three Phase Power Quality Analyzer
Mi550 Portable Three Phase Electrical Power Quality Analyzer Externally Connected with Open Type Rogowski Coilor voltage CT, can perform cable testing without dismantling, simplify testing steps, save construction costs,and is more suitable for engineering testing as well as system distribution inspection and maintenance.
Reference: ME531
Brand: Meatrol
ME531 Rogowski Multifunction Data collector
ME531 Rogowski Multifunction Data collector
-Multifunction Data collector
-DIN-RAIL NO LCD
-Communication: MODBUS-RS485
-Power supply:85-240V
-Harmonic:51THD
-2*digital output ,2*digital input,
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-5 Rated current selectable:100A/600A/1kA/3kA/6kA
100A MRC-24 (50mV/kA@50Hz)
600A MRC-36 (50mV/kA@50Hz)...
Reference: MRC-16
Brand: Meatrol
MRC-16 Mini flexible Rogowski coil
Advantage*Excellent linearity*Wide dynamic range* Not damaged by large overloads* Excellent degree of rejection to the externalcurrent conductor* No danger from open-circuited secondary* Zero power consumption* Small position error* Soft and light, easy to install* Long-term stability* Wide dynamic range* IP67 protection level
Reference: RCT-35
Brand: Meatrol
RCT-35 Rigid Rogowski coil
applications* Measuring devices, laboratory instrumentation.* Energy control and monitoring systems.* DC ripple measurement* Monitoring of harmonics and transients.* Power meter, power analyzer sensor
Reference: ME435
Brand: Meatrol
ME435 Portable Multifunctional Three-Phase Power Analyzer with Rogowski Coils MEATROL
INCLUDED 4PCS voltage clamp
-Power supply:4*AA battery or 5V DC
-Harmonic:51THD
-4GB SD card recorder
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-5 Rated current selectable:100A/600A/1kA/3kA/6kA 100A MRC-24 (50mV/kA@50Hz)
600A MRC-36 (50mV/kA@50Hz)
1000A NRC-100 (85mV/kA@50Hz)
3000A NRC-150 (85mV/kA@50Hz)
6000A NRC-200 (50mV/kA@50Hz)...
The S1 is a high precision Rogowski coil integrator, in a compact shielded aluminum alloy housing, powered directly from
the main
-Rated input:100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)
-Rated output:0-10VAC333mV rms
-Rated coil ratio:50mV/kA or 85mV/kA(need to be define)
-Accuracy:±0.2%
-Bandwidth:5Hz to 20kHz
-Power supply:4-12V(default) or 24V DC
Noted:each 100A only output maximum 1V