Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: VH400-2M
Brand: VEGETRONIX
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
PAYMENT METHODS
The DR series dendrometers are used for high-precision and continuous measurement of stem diameter changes. These devices are suitable for long-term use in outdoor conditions. Due to their extremely low power consumption, Ecomatik dendrometers are ideal for battery-powered solutions, e.g., in IoT applications. DR dendrometers are specially designed for tree trunks with medium to very large diameters (> 8 cm; or DC3, > 5 cm). DR dendrometers are mounted with one (DR3, DR3W) or two special screws (DR1, DR2, DR1W) anchored in the tree stem. The changes outside the trunk wood correspond to then radial growth and the daily variation of the trunk diameter, which is associated with tree water status. Screw-mounting ensures extreme stability for long-term measurements with limited maintenance options. DR dendrometers are available in five different versions:
1. DR1: with standard mounting frame and measuring range from of 11 mm for species with slow and average growth rates
2. DR1W: hermetically sealed to withstand extreme environmental conditions (under snow cover, underwater, elevated exposure to dust and corrosive agents), with standard mounting frame, measuring range of 11 mm for species with slow and average growth rates
3. DR2: with standard mounting frame and larger measuring range of 25 mm for fast-growing species
4. DR3: quick assembly frame with only 1 screw, suitable for treediameters >5 cm, measuring range of 11 mm for species with slow and average growth rates
5. DR3W: hermetically sealed to withstand extreme environmental conditions (under snow cover, underwater, elevated exposure to dust and corrosive agents), quick assembly frame with only 1 screw, for tree diameters >5 cm, measuring range of 11 mm for species with slow and average growth rates
| Sensor model name | Radius dendrometer Type DR1 and DR1W (hermetically sealed) | Radius dendrometer Type DR2 | Radius dendrometerType DR3 and DR3W (hermetically sealed) |
| Scope of application | Slow/average growth rates | Fast-growing | slow/normal growth rates |
| Suitable for diameter | > 8 cm | > 8 cm | > 5 cm |
| Special features/limitations | 2x trunk screws for mounting | Extended measurement range for fast-growing species, 2x trunk screwsfor mounting | Only 1 trunk screw for mounting, less invasive; dual point installation possible: separate measurement of wood and bark (requires 2 DR3 sensors) |
| Measurement range | 11 mm linear | 25,4 mm linear | 11 mm linear |
| Resolution | Data logger dependent e.g.: CR300 series: 0.01 μm Dendrometer logger DL18: 0.2 μm | Data logger dependent e.g.: CR300 series: 0.03 μm Dendrometer logger DL 18: 0.5μm | Data logger dependent e.g: CR300 series: 0.01μm Dendrometer logger DL18: 0.2μm |
| Accuracy | Dendrometer dependent: max. ± 4.5% of the measured value (stable offset) Data logger dependent e.g.: CR300 series: ± (0.04% of the measured value +0.3 μm) Dendrometer logger DL18: ± (0.1% of the measured value +0.45 μm) | Dendrometer dependent: max. ± 1.97% of the measured value (stable offset) Data logger dependent e.g: CR300 series: ± (0.04% of the measured value +0.6μm) Dendrometer logger DL18: ± (0.1% of the measured value +1 μm) | Dendrometer dependent: max. ± 4.5% of the measured value (stable offset) Data logger dependente.g:CR300 series: ± (0.04% of the measured value +0.3 μm) Dendrometer logger DL18: ± (0.1% of the measured value +0.45 μm) |
| Output signal | Analogue, 0V to Vex (excitation supply voltage) | Analogue, 0V bis Vex (excitation supply voltage) | Analogue, 0V to Vex (excitation supply voltage) |
| Temperature drift of the sensor | < 0.2 µm/°C in the whole measurement range | < 0.2 µm/°C in the whole measurement range | < 0.2 μm/°C in the whole measurement range |
| Linearity | < 1% | < 0,7% | < 1% |
| Operational conditions | All Models:normal outdoor field conditions, -25 to–70 °C, 0 to–100% relative air humidity; Hermetically Sealed Model DR1W: even under extreme environmental conditions (underwater, below snow cover, under exposure to strongly corrosive substances e.g. saltwater, ash, aggressive agricultural chemicals) | All Models: normal outdoor field conditions,-25 to 70 °C, 0 to 100% relative air humidity | All Models: normal outdoor field conditions, -25 to70 °C, 0 to 100% relative air humidity; Hermetically Sealed Model DR1W: even under extreme environmental conditions (underwater, below snow cover, under exposure to strongly corrosive substances e.g. saltwater, ash, aggressive agricultural chemicals) |
| Weight (sensor without cable) | 13 g (DR1), 17 g (DR1W) | 33 g | 13 g |
| Power supply | Vex (! stabilized!) 0.5 to 10 VDC, Power consumption max. 0.28 μWh per measurement | Vex (! stabilized!) 0.5 to 10 VDC, Power consumption max. 0.28 μWh per measurement | Vex (! stabilized!) 0.5 to 10 VDC, Power consumption max. 0.28 μWh per measurement |
| Material | Stainless steel and aluminium | Stainless steel and aluminium | Stainless steel and aluminium |
| Sensor cable length | 5 m, extendable on request to max. 100 m | 5 m, extendable on request to max. 100 m | 5 m, extendable on request to max. 100 m |
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: DC1
Brand: ECOMATIK
Reference: DV-DENDRO
Brand: ECOMATIK
Reference: SFL
Reference: MX1105
Brand: ONSET
Reference: RX3004+SP-611
Brand: ONSET
Reference: DF4
Brand: ECOMATIK
Reference: DD-L1
Brand: ECOMATIK
Reference: SF-L
Brand: ECOMATIK
Reference: U30-NRC-SYS-C
Brand: ONSET
Reference: BL 18
Brand: ECOMATIK
check_circle
check_circle
