Reference: 10HS ECHO - 5Mts
10HS ECHO DECAGON Soil Moisture Sensor (Large Volume)
Soil Moisture Sensor from Decagon Devices.
- APPLICATIONS
- CATALOGS
- PRODUCTS
- BROWSE BY MEASUREMENT
- 4-20mA
- ABSOLUTE PRESSURE
- AC CURRENT
- AIR DIRECTION
- AIR QUALITY
- AIR TEMPERATURE
- AMPERES (A)
- BAROMETRIC PRESSURE
- CARBON DIOXIDE
- Color / Colorimeter
- COMPRESSED AIR
- COMPRESSED AIR FLOW
- CONDUCTIVITY
- DC CURRENT
- DENDROMETERS
- DEW POINT
- DIFFERENTIAL PRESSURE
- DUST SENSOR
- ELECTRICAL CONDUCTIVITY (SOIL)
- ELECTRICAL CONDUCTIVITY (WATER)
- ELECTRICAL NETWORK ANALYZERS
- ENGINE ON/OFF
- EVAPOTRANSPIRATION
- GAUGE PRESSURE
- ILLUMINANCE
- KILOWATT HOURS (kWh)
- KILOWATTS (kW)
- LEAF MOISTURE
- LIGHT INTENSITY
- NOISE
- OXYGEN
- PAR RADIATION
- PARTICLE COUNTERS
- PH
- PULSE INPUT
- RAINFALL
- RELATIVE HUMIDITY
- REMOTE WATER LEVEL MONITORING
- SALINITY
- SOIL HUMIDITY
- SOIL TEMPERATURE
- SOIL WATER POTENTIAL
- SOLAR RADIATION
- TEMPERATURE
- THERMOCOUPLE
- UV RADIATION
- VELOCIDAD AIRE
- WATER FLOW
- WATER LEVEL
- WATER PRESSURE
- WATER TEMPERATURE
- WIND
- BY ENVIRONMENT
- BY TYPE
- WEATHER STATIONS
- BROWSE BY MEASUREMENT
Reference: BASE-U-4
BASE-U-4 - HOBO Optical USB Base Station
A splash resistant base station and couplers used to download data from any HOBO data logger with an optical USB interface.
Reference: UA-002-64
Brand: ONSET
UA-002-64 HOBO Pendant Temperature/Light 64K Data Logger
A miniature, value-priced, waterproof data logger for temperature and light monitoring applications; stores 52K measurements.
IMPORTANT INFORMATION
Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1).
HOBOware Pro is required when using the HOBO Waterproof Shuttle. See compatible items below.
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
DS1922E-F5 High-Temperature Logger iButton, 8KB Datalog Memory
DS1922E-F5 High-Temperature Logger iButton
Applications
High-Temperature Logging (Process Monitoring, Industrial Temperature Monitoring)
Steam Sterilization
Reference: DS9107+
Brand: iBUTTON MAXIM INTEGRATED
DS9107+ Capsule for Immersing iButton in Liquids
DS9107+
The iButton® Capsule is a mechanical enclosure to protect Temperature Logger iButtons (DS1921 and DS1922 series) from moisture, solvents and pressure.
-
PAYMENT METHODS
Description
The DR series dendrometers are used for high-precision and continuous measurement of stem diameter changes. These devices are suitable for long-term use in outdoor conditions. Due to their extremely low power consumption, Ecomatik dendrometers are ideal for battery-powered solutions, e.g., in IoT applications. DR dendrometers are specially designed for tree trunks with medium to very large diameters (> 8 cm; or DC3, > 5 cm). DR dendrometers are mounted with one (DR3, DR3W) or two special screws (DR1, DR2, DR1W) anchored in the tree stem. The changes outside the trunk wood correspond to then radial growth and the daily variation of the trunk diameter, which is associated with tree water status. Screw-mounting ensures extreme stability for long-term measurements with limited maintenance options. DR dendrometers are available in five different versions:
1. DR1: with standard mounting frame and measuring range from of 11 mm for species with slow and average growth rates
2. DR1W: hermetically sealed to withstand extreme environmental conditions (under snow cover, underwater, elevated exposure to dust and corrosive agents), with standard mounting frame, measuring range of 11 mm for species with slow and average growth rates
3. DR2: with standard mounting frame and larger measuring range of 25 mm for fast-growing species
4. DR3: quick assembly frame with only 1 screw, suitable for treediameters >5 cm, measuring range of 11 mm for species with slow and average growth rates
5. DR3W: hermetically sealed to withstand extreme environmental conditions (under snow cover, underwater, elevated exposure to dust and corrosive agents), quick assembly frame with only 1 screw, for tree diameters >5 cm, measuring range of 11 mm for species with slow and average growth rates
| Sensor model name | Radius dendrometer Type DR1 and DR1W (hermetically sealed) | Radius dendrometer Type DR2 | Radius dendrometerType DR3 and DR3W (hermetically sealed) |
| Scope of application | Slow/average growth rates | Fast-growing | slow/normal growth rates |
| Suitable for diameter | > 8 cm | > 8 cm | > 5 cm |
| Special features/limitations | 2x trunk screws for mounting | Extended measurement range for fast-growing species, 2x trunk screwsfor mounting | Only 1 trunk screw for mounting, less invasive; dual point installation possible: separate measurement of wood and bark (requires 2 DR3 sensors) |
| Measurement range | 11 mm linear | 25,4 mm linear | 11 mm linear |
| Resolution | Data logger dependent e.g.: CR300 series: 0.01 μm Dendrometer logger DL18: 0.2 μm | Data logger dependent e.g.: CR300 series: 0.03 μm Dendrometer logger DL 18: 0.5μm | Data logger dependent e.g: CR300 series: 0.01μm Dendrometer logger DL18: 0.2μm |
| Accuracy | Dendrometer dependent: max. ± 4.5% of the measured value (stable offset) Data logger dependent e.g.: CR300 series: ± (0.04% of the measured value +0.3 μm) Dendrometer logger DL18: ± (0.1% of the measured value +0.45 μm) | Dendrometer dependent: max. ± 1.97% of the measured value (stable offset) Data logger dependent e.g: CR300 series: ± (0.04% of the measured value +0.6μm) Dendrometer logger DL18: ± (0.1% of the measured value +1 μm) | Dendrometer dependent: max. ± 4.5% of the measured value (stable offset) Data logger dependente.g:CR300 series: ± (0.04% of the measured value +0.3 μm) Dendrometer logger DL18: ± (0.1% of the measured value +0.45 μm) |
| Output signal | Analogue, 0V to Vex (excitation supply voltage) | Analogue, 0V bis Vex (excitation supply voltage) | Analogue, 0V to Vex (excitation supply voltage) |
| Temperature drift of the sensor | < 0.2 µm/°C in the whole measurement range | < 0.2 µm/°C in the whole measurement range | < 0.2 μm/°C in the whole measurement range |
| Linearity | < 1% | < 0,7% | < 1% |
| Operational conditions | All Models:normal outdoor field conditions, -25 to–70 °C, 0 to–100% relative air humidity; Hermetically Sealed Model DR1W: even under extreme environmental conditions (underwater, below snow cover, under exposure to strongly corrosive substances e.g. saltwater, ash, aggressive agricultural chemicals) | All Models: normal outdoor field conditions,-25 to 70 °C, 0 to 100% relative air humidity | All Models: normal outdoor field conditions, -25 to70 °C, 0 to 100% relative air humidity; Hermetically Sealed Model DR1W: even under extreme environmental conditions (underwater, below snow cover, under exposure to strongly corrosive substances e.g. saltwater, ash, aggressive agricultural chemicals) |
| Weight (sensor without cable) | 13 g (DR1), 17 g (DR1W) | 33 g | 13 g |
| Power supply | Vex (! stabilized!) 0.5 to 10 VDC, Power consumption max. 0.28 μWh per measurement | Vex (! stabilized!) 0.5 to 10 VDC, Power consumption max. 0.28 μWh per measurement | Vex (! stabilized!) 0.5 to 10 VDC, Power consumption max. 0.28 μWh per measurement |
| Material | Stainless steel and aluminium | Stainless steel and aluminium | Stainless steel and aluminium |
| Sensor cable length | 5 m, extendable on request to max. 100 m | 5 m, extendable on request to max. 100 m | 5 m, extendable on request to max. 100 m |
Product Details
DR1
Comments (0)
Grade
No customer reviews for the moment.
8 other products in the same category:
Reference: SFL
Brand: NESA
SFL - IoT RADIO INTERFACE FOR ANALOG AND DIGITAL SENSORS
SFL IoT RADIO INTERFACE FOR ANALOG AND DIGITAL SENSORS
Highlighted specs
Suitable for a wide range of sensors with different output signals
18-bit DAC acquisition system
Latest generation narrow-band technology
Battery powered and long autonomy
Four different ways of sending data
IP65 enclosure
According to CE norms
Reference: MX1105
Brand: ONSET
MX1105 HOBO 4-Channel Analog Data Logger Bluetooth
MX1105 HOBO 4-Channel Analog Data Logger Bluetooth
Four channel inputs to measure and transmit data wirelessly from chosen sensors to your mobile device or Windows laptop via Bluetooth technology.
Important Information
External sensors sold separately. Requires HOBOconnect app and a compatible mobile device or Windows computer.
Reference: DV-DENDRO
Brand: ECOMATIK
DV- Vertical Dendromete
DV- Vertical Dendromete
The DV dendrometer is used for high-precision and continuous measurement of vertical changes in dimension and/or curvature of tree stems. This device is suitable for long-term in outdoor conditions. Due to their extremely low power consumption, Ecomatik dendrometers are ideal for battery-powered solutions, e.g., in IoT applications.
Reference: DC1
Brand: ECOMATIK
DC1 Circumference Dendrometer
DC1 Circumference Dendrometer
The DC series dendrometers are used for high-precision and continuous measurement of changes in stem circumference. These devices are suitable for long-term use in outdoor conditions. Due to their extremely low power consumption, Ecomatik dendrometers are ideal for battery-powered solutions, e.g., in IoT applications.
Reference: DD-L1
Brand: ECOMATIK
DD-L Diameter Dendrometer Large
Advantages
Suitable for small to medium stems and branches with diameters between 3 and 30 cm (DD-L1W, 3 – 20 cm)
Reference: BL 18
Brand: ECOMATIK
DL 18 Mini-System with Data Logger
Compatible Sensors with DL 18 and DL 18 BLE:
Dendrometer (all models)
Temperature sensors (T-series)
Leaf sensors (LAT-series)
Air humidity and air temperature sensor (EM 14)
Soil moisture sensor
Light sensor (PAR: EM 20; Pyranometer: EM 25)
Reference: DF4
Brand: ECOMATIK
DF4 Fruit and Vegetable Dendrometer
DF4 Fruit and Vegetable Dendrometer
The DF series dendrometers are used for high-precision and continuous measurement of fruit and vegetable growth. These devices are suitable for long-term application in outdoor conditions. Due to their extremely low power consumption, Ecomatik dendrometers are ideal for battery-powered solutions, e.g., in IoT applications.