Reference: UA-002-64

Brand: ONSET

UA-002-64 HOBO Pendant Temperature/Light 64K Data Logger

(0)
A miniature, value-priced, waterproof data logger for temperature and light monitoring applications; stores 52K measurements.  IMPORTANT INFORMATION Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1). HOBOware Pro is required when using the HOBO Waterproof Shuttle. See compatible items below.
All best sellers
  • PAYMENT METHODS

SFL - IoT RADIO INTERFACE FOR ANALOG AND DIGITAL SENSORS MYJ
  • SFL - IoT RADIO INTERFACE FOR ANALOG AND DIGITAL SENSORS MYJ
  • SFL - IoT RADIO INTERFACE FOR ANALOG AND DIGITAL SENSORS MYJ
  • SFL - IoT RADIO INTERFACE FOR ANALOG AND DIGITAL SENSORS MYJ

SFL - IoT RADIO INTERFACE FOR ANALOG AND DIGITAL SENSORS

SFL

SFL IoT RADIO INTERFACE FOR ANALOG AND DIGITAL SENSORS

Highlighted specs

Suitable for a wide range of sensors with different output signals

18-bit DAC acquisition system

Latest generation narrow-band technology

Battery powered and long autonomy

Four different ways of sending data

IP65 enclosure

According to CE norms

Description

Radio module, for data acquisition and transmission with Narrow-Band technology at programmable frequency (UHF), or 3-4G, or SMS (GSM/GPRS), able to read digital and analogue electrical signals, at very high resolution. Data are then processed, and can be sent directly to a cloud platform, or through point-to-point connections, or networks with specific protocol (SigFox, LoRa, Socket, MQTT etc.) be forwarded to gateways up to a distance of several kilometers between transmitters and receiver (gateway).

The device is configurable to send data at specific intervals and reads signals in current, voltage, Pt100, status and frequency.

Input signals Differential input with current generator for Pt100

Pt100 – Termopile; Voltage 0 ÷ 2Vdc; Current 0 ÷ 20mA or 4 ÷ 20mA; Frequency up to 3KHz; Pulse counter (min 1ms)
Maximum possible configuration 2 x Analogic or Pt100; 1 x digital (3000Hz); 1 x digital (frequency or counter)
Resolution 18bit with over 262,000 measurement points in the range chosen for analog inputs, 25Hz for frequencies
Average accuracy <20µV full scale
Transmission frequency 860 ÷ 920MHz– programmable or quadi band (GSM/GPRS)
Coverage SigFox up to 15Km, Lora/NESA up to 8Km, GSM/GPRS based on availability of operator in area
Transmission protocols SigFox, LoRa/Lora-Wan, property, SMS, Socket TCP-Ip, MQTT
Working temperature -40 ÷ +60°C
Power and consumption 1 x Non-rechargeable 3.3V 8000mA type C2 lithium battery; Rechargeable battery from power bank, network or

mini external solar panel (2000mA)
Sensor power supply capacity + 12Vdc (max consumption allowed 30mA (warm-up <4sec @ 12Vdc)
Enclosure Die-cast aluminum for outdoor IP65
Weigth 1.450 g
Product Details
SFL
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:

Reference: RTR505BL

Brand: TandD

RTR505BL Wireless Data Logger

(0)
Channels: Temperature,Voltage,4-20mA,Pulse (Sensor not provided / Pt sensor available as option) Range: Measurement item depends on the input module (sold separately). For use with Thermocouple Module: -199~1760°C For use with Pt Module: -199~600°C For use with Voltage Module: 0~22V For use with 4-20mA Module: 0~20mA For use with Pulse Input Cable: Pulse...

Reference: DV-DENDRO

Brand: ECOMATIK

DV- Vertical Dendromete

(0)
DV- Vertical Dendromete The DV dendrometer is used for high-precision and continuous measurement of vertical changes in dimension and/or curvature of tree stems. This device is suitable for long-term in outdoor conditions. Due to their extremely low power consumption, Ecomatik dendrometers are ideal for battery-powered solutions, e.g., in IoT applications.

Reference: U8415

Brand: COMET

U8415 CO2 monitor with built-in carbon dioxide sensor

(0)
U8415 CO2 monitor with built-in carbon dioxide sensor CO2 monitor - carbon dioxide level detector. Although carbon dioxide is invisible and odourless, increased CO2 content in the room leads to fatigue and decreased mental concentration. Battery powered device U8415 with external power (optional accessories) is designed to indication of CO2 concentration...

Reference: S-100

Brand: BOSEAN

S-100 Gas Leak Detector

(0)
The S-100 portable gas leak detector adopts advanced integrated circuit technology and standard intelligent technology. The detector adopts a natural diffusion type for gas sampling and high-quality gas sensors for gas detection, which have good sensitivity and excellent repeatability. It is easy to use and maintain,greatly meeting the high reliability...

Reference: Quido Estación agrometeorológica

Brand: NESA

Quido agrometeorological station

(0)
Quido is much more than just a rain measurement tool. It is the only environmental monitoring system that alerts you to the appearance of certain weather and climate conditions thanks to the correlation between different measurements.This way you can know when it is raining or very hot even from miles away and plan your work day in the best possible way...

Reference: RXW-GP3A-868

Brand: ONSET

RXW-GP3A-868 HOBOnet Multi-Depth Soil Moisture Sensor

(0)
RXW-GP3A-868 HOBOnet Multi-Depth Soil Moisture Sensor An award-winning wireless sensor that works with the HOBOnet system to measure soil moisture and temperature at multiple depths with a single probe, for quick and easy installation.Important informationA complete system requires at least one HOBO RX3000 Remote Monitoring Station, one HOBOnet Wireless...

Reference: PL1000

Brand: NESA

PL1000 1000 cm² class A rain gauge

(0)
The PL1000 class A rain gauge consists of a cylindrical body made of anodised aluminium with a collection surface of 1000 cm² on which is mounted a funnel-shaped collection hole which, through a filter, directs the water into a stainless steel bucket made with a blade-support system. A Reed contact detects the switching of the rocker arm, filtering any...

Reference: TMC6-HE

Brand: ONSET

TMC6-HE Temperature (6') Sensor

(0)
TMC6-HE Temperature (6') Sensor A faster-response version of our TMC6-HD temperature sensor, complete with a plated-copper sensor probe. Includes accessories for strapping the sensor to a pipe or attaching it to a flat surface. For use with HOBO U series, loggers, UX120-006M loggers, MX1100 external-channel loggers, or ZW series wireless data nodes.

Follow us on Facebook