
Reference: 10HS ECHO - 5Mts
Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: VH400-2M
Brand: VEGETRONIX
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
Digital first class pyranometer with Modbus over TTL and 4-20 mA output
SR15 digital pyranometer series is an all-digital range of solar radiation sensors applied in general high-accuracy observations. SR15 pyranometers comply with the “first class” specifications according to the ISO 9060:1990 standard and “spectrally flat class B” requirements in the 2018 revision. Version SR15-D2A2 offers Modbus over TTL, and 4-20 mA current loop output.
Measurand: | hemispherical solar radiation |
ISO 9060:2018 classification: | spectrally flat Class B pyranometer |
ISO 9060:1990 classification: | first class pyranometer |
IEC 61724-1:2021 compliance: | Class B |
Application: | National Meteorological Networks,PV monitoring commercial and utility scale,PV monitoring small sized,meteorology / climatology,other |
Heater: | no |
Output: | 4-20 mA current loop,Modbus TTL |
Calibration uncertainty : | < 1.8 % (k = 2) |
Calibration traceability: | to WRR |
Spectral range : | 285 to 3000 x 10⁻⁹ m |
Response time: | < 10 s |
Zero offset a: | 5 W/m² unventilated |
Rated operating temperature range: | 40 to +80 °C |
Temperature response: | < ± 2 % (-10 to +40 °C) |
Heater: | 1.5 W at 12 VDC |
Standard cable length: | 5 m |
Levelling: | optional spring-loaded levelling, with or without tube mount |
Output: | : |
Communication protocol: | Modbus |
Hardware interface: | TTL |
Transmission mode: | RTU |
Output: | irradiance in W/m² and instrument body temperature in °C |
On-board heater: | not included |
Analogue output: | 4-20 mA current loop |
Version order codes: | SR15-D2A2, SR15-D2A2-LM01, SR15-D2A2-TLM01 |
Options
Spring levelling – convenient for easy mounting, levelling and exchange of instruments on flat surfaces (LM01)
Pipe levelling bracket with bolt set (TLM01)
PMF01 bracket for inclined installations
Longer cable – 10 and 20 metre lengths
20 metre extension cable with 2 connectors
Improved measurement accuracy
Calibration of the SR15 pyranometer has been improved – our latest calibration method results in a sensitivity uncertainty of 1.8%, compared to typical uncertainties of over 2.8% for this class of pyranometers. The response time of the SR15 is <10 s, a significant improvement over previous sensors and the competition.
Use as sunshine duration sensor
WMO has approved the “pyranometric method” to calculate sunshine duration from pyranometer
measurements in WMO-No. 8, Guide to Meteorological Instruments and Methods of
Observation. This implies that SR15 may be used, in combination with appropriate software,
to estimate sunshine duration. This is much more cost-effective than using a dedicated sunshine
duration sensor. Ask for our application note.
Suggested Use
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: U0141
Brand: COMET
Reference: TAI Sensor
Reference: PX3PXX01S
Brand: VERIS
Reference: RK200-07 0-2V
Brand: RIKA SENSORS
Reference: OS30p+
Reference: T5245
Brand: COMET
Reference: S-THC-M002
Brand: ONSET
Reference: ZL6 BASIC
Brand: METER GROUP
Reference: 500.312
Brand: PRONAMIC
Reference: RK400-02
Brand: RIKA SENSORS
Reference: MX2304
Brand: ONSET
Reference: BH-90M
Brand: BOSEAN
Reference: MYJ-49030004
Brand: FUEL CELL
Reference: M1 tempmate
Brand: tempmate
Reference: RK300-08
Brand: RIKA SENSORS
Reference: P2-142
Brand: Apogee Instruments
Digital first class pyranometer with Modbus over TTL and 4-20 mA output
SR15 digital pyranometer series is an all-digital range of solar radiation sensors applied in general high-accuracy observations. SR15 pyranometers comply with the “first class” specifications according to the ISO 9060:1990 standard and “spectrally flat class B” requirements in the 2018 revision. Version SR15-D2A2 offers Modbus over TTL, and 4-20 mA current loop output.
check_circle
check_circle