Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: VH400-2M
Brand: VEGETRONIX
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
PAYMENT METHODS
U3121G IoT Wireless Temperature and Relative Humidity Datalogger for external probe, with built-in 4G modem
GSM datalogger is designed to record temperature and humidity from external probe. In case of exceeded set limits, SMS and JSON messages can be sent via 4G data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system.
It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper.
The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable.
The temperature and humidity probe is not included in delivery, probe of the appropriate length and design you can choose in optional accessories.
The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
Technical data
Measured value
Temperature
Relative humidity
Counted values (dew point…)
TEMPERATURE SENSOR
Measuring range according to the connected probe Digi/E
Accuracy according to the connected probe Digi/E
Resolution 0.1 °C
Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) 8 min
HUMIDITY SENSOR
Measuring range according to the connected probe Digi/E
Accuracy according to the connected probe Digi/E
Resolution 0.1% RH
DEW POINT
Measuring range according to the connected probe Digi/E
Accuracy according to the connected probe Digi/E
Resolution 0.1 °C
GSM MODEM PARAMETERS
LTE Cat 1 LTE FDD/GSM/GPRS/EDGE
Supported network types GSM/GPRS/EDGE 900/1800 MHz
LTE FDD B1/B3/B5/B7/B8/B20
GENERAL TECHNICAL DATA
Operating temperature: -20 to +60 °C
Channels: 1x connectable temperature+humidity probe
Memory: 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode
Recording interval to the internal memory adjustable from: 1 second to 24 hours
Recording interval to the COMET Cloud from: 5 minutes
Interval for measuring and evaluating alarms adjustable: 1 s, 10 s, 1 min
Recording mode noncyclic: - data logging stops after filling the memory
cyclic - after filling memory oldest data is overwritten by new
Real time clock: year, leap year, month, day, hour, minute, second
Power rechargeable Li-Ion battery A8200, 3.6V/5200mAh
Protection class: IP67
Dimensions: 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm
Weight (including batteries): approx. 260 g
Warranty: 3 years
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: S-THC-M008
Brand: ONSET
Reference: SONIC15
Brand: MAE
Reference: RTR-602S
Brand: TandD
Reference: Affinity Data Logger
Reference: DLI-500
Brand: Apogee Instruments
Reference: RK300-02B
Brand: RIKA SENSORS
Reference: TR-52i + TR-5101
Brand: TandD
Reference: K-600
Brand: BOSEAN
Reference: HF03-LI19
Brand: Hukseflux
Reference: RXW-RGF-868
Brand: ONSET
Reference: EL1
Brand: MAE
Reference: MX2305
Brand: ONSET
Reference: RK520-01-4-20mA
Brand: RIKA SENSORS
Reference: FS-5000
Brand: BOSEAN
Reference: BASE-U-4
Reference: KRC-50
Brand: Meatrol
U3121G IoT Wireless Temperature and Relative Humidity Datalogger for external probe, with built-in 4G modem
GSM datalogger is designed to record temperature and humidity from external probe. In case of exceeded set limits, SMS and JSON messages can be sent via 4G data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system.
It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper.
The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable.
The temperature and humidity probe is not included in delivery, probe of the appropriate length and design you can choose in optional accessories.
The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
check_circle
check_circle
