U6841G IoT Wireless Datalogger for 3 current inputs 0-20mA and 1 two-state input, with built-in 4G modem

Technical data

Measured value

Current

Two-state signal


CURRENT INPUT

Measuring range 0 to 20 mA DC
Resolution better than 1 µA
Accuracy ±20 µA
Input resistance approx. 100 Ω
Minimum current 0 mA (open circuit)
Maximum current limited to approx. 40 mA


BINARY INPUT

Parameters of the voltage contact „L“ level input voltage:< 0,8 V(*);
„H“ level input voltage:> 2 V;
Minimum voltage applicable:0 V;
Maximum voltage applicable:+30 V DC
Parameters of the voltage-free contact Contact resistance in „switched-on“ state:< 10 kOhm;
Contact resistance in the „switched-off“ state:> 2 MOhm;
Contact voltage in the „switched-off“ state:ca 3 V;
Minimum state duration necessary for latching the state:1s


GSM MODEM PARAMETERS

LTE Cat 1 LTE FDD/GSM/GPRS/EDGE
Supported network types GSM/GPRS/EDGE 900/1800 MHz
LTE FDD B1/B3/B5/B7/B8/B20

GENERAL TECHNICAL DATA

• Operating temperature -20 to +60 °C
• Channels 3x current input, 1x binary input
• Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode
• Recording interval to the internal memory adjustable from 1 second to 24 hours
• Recording interval to the COMET Cloud from 5 minutes
• Interval for measuring and evaluating alarms adjustable 1 s, 10 s, 1 min
• Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new
• Real time clock year, leap year, month, day, hour, minute, second
• Power rechargeable Li-Ion battery A8200, 3.6V/5200mAh
• Protection class IP20
• Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm
• Weight (including batteries) approx. 270 g
• Warranty 3 years
• Optional accessories and download