Reference: 10HS ECHO - 5Mts
Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
Reference: DS9107+
Brand: iBUTTON MAXIM INTEGRATED
Na-11 LAQUAtwin Pocket Water Quality Meter
The only pocket meter that directly measures sodium ion concentration in 0.3ml sample (or 0.05ml sample with sampling sheet B). Unique sensor allows measurement of viscous liquids, solids, and even powder samples. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the flat sensor. This procedure saves you time and prevents wasting your precious sample.
Model Na-11
Measurement Principle Ion Selective Electrode
Minimum Sample Volume 0.3ml (0.05ml with sampling sheet B)
Measurement Range
2 to 9900 ppm (mg/L)
0.1 to 430 mmol/L
Resolution
0 to 99 ppm: 1 ppm
100 to 990 ppm: 10 ppm
1000 to 9900 ppm: 100 ppm
Accuracy ± 10% of actual value
Calibration Points Up to 2
Temperature Display 0 to 50.0 ºC
Temperature Calibration 5 to 40.0 ºC
Display Custom (monochrome) digital LCD with backlight
Operating Temperature 5 to 40.0 ºC
Operating Humidity 85% or less in relative humidity (no condensation)
Power CR2032 batteries (2)
Battery Life Approx. 400 hours in continuous use without backlight
Material ABS epoxy
Dimensions 164 x 29 x 20 mm (excluding projections)
Mass Approx. 55 g (including sensor and batteries)
Functions
Auto Standard Recognition
Changeable High and Low Calibration Values
Multiplication Compensation
Temperature Calibration
Auto Hold / Auto Stable Measurement
Switchable Backlight
Automatic Power Off (30mins)
Low Battery Indicator
IP67 Dust/Waterproof
Replaceable Sensor
Minimum sample volume: 0.3ml (0.05ml with sampling sheet B)
Up to 2 calibration points
Auto standard recognition: 150 & 2000ppm sodium (default)
Changeable high and low calibration values
Multiplication compensation: 0.01 to 9.90
Temperature and mV display
Temperature calibration: 5 to 40.0 ºC
Auto hold / auto stable measurement
Auto power off: 30 mins.
Low battery indicator
IP67 Rating dust & waterproof
Replaceable sensor
400 Hours battery life: continuous use without backlight
Material: ABS epoxy
Display: custom (monochrome) digital LCD with backlight
Operating conditions: 5 to 40 ºC, 85% or less relative humidity
Warranty: 2 years - meter, 6 months - sensor
Packed in handy carrying case
Supplied with 150 & 2000ppm sodium standards, 5 x sampling sheets B, 2 x CR2032 batteries, dropper, instruction and quick manuals
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: 12120045
Brand: FUEL CELL
Reference: RXW-GP3A-868
Brand: ONSET
Reference: T-Y02
Brand: BOSEAN
Reference: MX2203
Brand: ONSET
Reference: PL1000
Brand: NESA
Reference: LS197
Brand: LINSHANG
Reference: PX3PLX01
Brand: VERIS
Reference: RK210-01A-A-A-B
Brand: RIKA SENSORS
Reference: SC-1
Reference: RTR-576-S
Brand: TandD
Reference: 514‐22
Brand: HORIBA LAQUAtwin
Reference: EC-5
Reference: AD/A-I
Brand: FUEHLER SYSTEME
Reference: 57080133 1gr
Brand: FUEL CELL
Reference: HF-IN
Brand: Meatrol
Reference: TR-75nw
Brand: TandD
check_circle
check_circle