Reference: STP-5
Brand: Meatrol
3 in 1 RJ45 port Current Sensor STP ME238
Advantage• Calibrated to 0.5%• Much easy to install through RJ45• Easy to fixed on bus-bar or cable by cable ties• Very competitive priceRelated ProductsOnly for ME238
- APPLICATIONS
- CATALOGS
- PRODUCTS
- BROWSE BY MEASUREMENT
- 4-20mA
- ABSOLUTE PRESSURE
- AC CURRENT
- AIR DIRECTION
- AIR QUALITY
- AIR TEMPERATURE
- AMPERES (A)
- BAROMETRIC PRESSURE
- CARBON DIOXIDE
- COMPRESSED AIR
- COMPRESSED AIR FLOW
- CONDUCTIVITY
- DC CURRENT
- DEW POINT
- DIFFERENTIAL PRESSURE
- DUST SENSOR
- ELECTRICAL CONDUCTIVITY (SOIL)
- ELECTRICAL CONDUCTIVITY (WATER)
- ELECTRICAL NETWORK ANALYZERS
- ENGINE ON/OFF
- EVAPOTRANSPIRATION
- GAUGE PRESSURE
- KILOWATT HOURS (kWh)
- KILOWATTS (kW)
- LEAF MOISTURE
- LIGHT INTENSITY
- NOISE
- PAR RADIATION
- PARTICLE COUNTERS
- PH
- PULSE INPUT
- RAINFALL
- RELATIVE HUMIDITY
- REMOTE WATER LEVEL MONITORING
- SALINITY
- SOIL HUMIDITY
- SOIL TEMPERATURE
- SOIL WATER POTENTIAL
- SOLAR RADIATION
- TEMPERATURE
- THERMOCOUPLE
- UV RADIATION
- VELOCIDAD AIRE
- WATER FLOW
- WATER LEVEL
- WATER PRESSURE
- WATER TEMPERATURE
- WIND
- BY ENVIRONMENT
- BY TYPE
- WEATHER STATIONS
- BROWSE BY MEASUREMENT
Suppliers
No supplier
-
PAYMENT METHODS
DTP.1 Integrator for Rogowski Coils
DTP.1 Three phase DIN-RAIL 333mV output Integrator
-Rated input:100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)
-Rated output:333mV rms
-Rated coil ratio:50mV/kA or 85mV/kA(need to be define)
-Accuracy:±0.5% (from 1% to 100% of rated )
-Bandwidth:30Hz to 5KHz
-Power supply:12VDC
Noted:each 100A only output maximum 1V
Description
The DTP is a DIN RAIL THREE-PHASE Rogowski coil integrator with Vac/dc output, installation in a distribution box, in a
Plastic box with 1 DIN-RAIL module, powered directly from the network.
The DTP can be combined with any model and size of Y-FCT or FCT Rogowski coils.
The available values are: 5Vac,4.5Vdc,4-20mA.
On request, the input value can be customized according to the application.
DTP and Rogowski coil is a very flexible system, suitable for high power load analysis, impulse current monitoring,
DC ripple measurement, etc.
Due to its specific characteristics, the flexible Rogowski coil is an extremely convenient solution for current measurement and
It can be used in several cases where the traditional current transducer is not the appropriate solution.
Product Details
DTP.1
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
Reference: KRC-50
Brand: Meatrol
KRC-50 Rigid Rogowski coil
"-6 layer PCB
-Ratio:1.025mV/kA@50Hz
-Resistance: 2.07 k Ω.
-Work frequencies:1 Hz … 20 kHz
-Inner diameter [ mm ] 48
-Outer diameter [ mm ] 96
-Thickness [mm] 28
-Output Method:Screw\SR\2 IN 1
-Accuracy:±0.5%(temperature drift:200ppm/C)
-linearity:0.2%(from 1% to 100% of rated )
-Position error:±1%"
Reference: RCT-35
Brand: Meatrol
RCT-35 Rigid Rogowski coil
applications* Measuring devices, laboratory instrumentation.* Energy control and monitoring systems.* DC ripple measurement* Monitoring of harmonics and transients.* Power meter, power analyzer sensor
Reference: Mi550
Brand: Meatrol
Mi550 Portable Three Phase Power Quality Analyzer
Mi550 Portable Three Phase Electrical Power Quality Analyzer Externally Connected with Open Type Rogowski Coilor voltage CT, can perform cable testing without dismantling, simplify testing steps, save construction costs,and is more suitable for engineering testing as well as system distribution inspection and maintenance.
Reference: ME531
Brand: Meatrol
ME531 Rogowski Multifunction Data collector
ME531 Rogowski Multifunction Data collector
-Multifunction Data collector
-DIN-RAIL NO LCD
-Communication: MODBUS-RS485
-Power supply:85-240V
-Harmonic:51THD
-2*digital output ,2*digital input,
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-5 Rated current selectable:100A/600A/1kA/3kA/6kA
100A MRC-24 (50mV/kA@50Hz)
600A MRC-36 (50mV/kA@50Hz)...
Reference: TRC-24
Brand: Meatrol
MINI Flexible Rogowski coil Precision type TRC-16
TRC is a MINI flexible current transducer based on Rogowski principle, particularly suitable for measurement incombination with portable devices. MRC coils are available in different sizes and can be supplied according tocustomer’s design, therefore they can be used in all those applications, in which traditional transducers are not fittingdue to its size...
Reference: Y-FCT-200
Brand: Meatrol
Y-FCT-200 Thin and flexible "Y" shaped Rogowski coil
* High linearity from 1A to 100kA* Wide dynamic range* Very useful with large or awkwardly shaped conductors or in places with limited access*There is no danger from the open secondary circuit* Will not be damaged by large overloads* Non-intrusive, no power is drawn from the main grid.* Measurement uniformity at any position of the conductor within the...
Reference: ZRC-50
Brand: Meatrol
ZRC-50 Thin Flexible Rogowski coil
* High linearity from 1A to 100kA*Wide dynamic range*Very useful with large or awkwardly shaped conductors or in places with limited access*There is no danger from the open secondary circuit*Not damaged by large overloads*Non-intrusive, no power is drawn from the main grid.* Measurement uniformity at any position of the conductor within the...
Reference: HF-IN
Brand: Meatrol
HF-IN High Frequency integrator
-Rated input::10kA,100kA Peak(only choice one point,accept OEM)
-Rated output:0-10V Peak
-Rated coil ratio:1.2mV/kA@50Hzneed to be define)
-Accuracy:±1%
-Bandwidth:1kHz to 1MHz
-Power supply:4-12V(default);24V DC
Reference: MQ21
Brand: Meatrol
MQ21 Energy Quality Analyzer
The MQ21, the externally connected power quality analyzer with an open type Rogowski coil or a voltage CT
Reference: S1.1
Brand: Meatrol
S1 High Accuracy integrator
The S1 is a high precision Rogowski coil integrator, in a compact shielded aluminum alloy housing, powered directly fromthe main
-Rated input:100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)
-Rated output:0-10VAC333mV rms
-Rated coil ratio:50mV/kA or 85mV/kA(need to be define)
-Accuracy:±0.2%
-Bandwidth:5Hz to 20kHz
-Power supply:4-12V(default) or...
Reference: H721HC
Brand: VERIS
H721HC Veris Current Transducer
Hawkeye 0 to 50/100/200 A Input 4 to 20 mA DC Output Analog Current Transducer, Split-Core, 0.7 in
Reference: ME231
Brand: Meatrol
ME231 Three-phase Multifunctional Smart Meter MEATROL
ME231
-Multifunction Smart Meter
--DIN-RAIL
-Communication: MODBUS-RS485
-Power supply: 85-240V
-Harmonic: 50 times meanwhile Harmonic display
-Without recorder
-6 Tariff
-One relay output, one digital input
-Connect:rogowski coil and 333mV Cts with VT up to 500kV
-Rated current:10A,100A,500A,1000A,3000A,6000A(Widely adapted to a variety of Rogowski coil...
Reference: MQ31
Brand: Meatrol
MQ31 Portable Power Quality Analyzer
CUSTOMER BENEFIT*With storage function, USB port data export* Measurable temperature and humidity* High-speed Ethernet communication* Support 4G module, high-speed cloud platform remote monitoring* Event record swell,dip l Core chip is ADE9000
(PRICE NOT INCLUDED ROGOWSKI COIL, CURRENT CLAMP AND POWER QUALITY MONITORING PLATFORM)
Reference: MRC-16
Brand: Meatrol
MRC-16 Mini flexible Rogowski coil
Advantage*Excellent linearity*Wide dynamic range* Not damaged by large overloads* Excellent degree of rejection to the externalcurrent conductor* No danger from open-circuited secondary* Zero power consumption* Small position error* Soft and light, easy to install* Long-term stability* Wide dynamic range* IP67 protection level
Reference: ME237
Brand: Meatrol
ME237 Three-phase Multifunction Smart Meter
Three-phase Multifunctional Panel Meter
Reference: ME131M
Brand: Meatrol
Multi-circuit Smart Energy meter ME131M
ME131 multi-circuit smart energy meter is compatible with both Rogowski coil and voltage-output split core current transformer, which could realize dismantling-free conductor test, simplify test procedures and save construction costs.
DTP.1 Three phase DIN-RAIL 333mV output Integrator
-Rated input:100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)
-Rated output:333mV rms
-Rated coil ratio:50mV/kA or 85mV/kA(need to be define)
-Accuracy:±0.5% (from 1% to 100% of rated )
-Bandwidth:30Hz to 5KHz
-Power supply:12VDC
Noted:each 100A only output maximum 1V