Included in delivery:
- MS6D
- Instruction manual
- Traceable calibration certificate
- USB cable
- COMET Cloud for 3 months (if optional Ethernet communication is connected)
- Ethernet interface
Technical data
Measured value
Temperature
Relative humidity
Counted values (dew point…)
Current
Voltage
Two-state signal
Frequency
Resistance
Event logging
GENERAL TECHNICAL DATA
- Operating temperature: 0 to +50 °C
- Channels: 1 to 16 inputs - software configurable
- Memory: 2MB (up to 480 000 values)
- Memory type: internal SRAM, backed-up by Lithium battery
- Recording interval: adjustable individually for all input channels from 1 second to 24 hours
- Recording interval: noncyclic - data logging stops after filling the memory
- cyclic - after filling memory oldest data is overwritten by new
- Real time clock: year, leap year, month, day, hour, minute, second, backed-up by Lithium battery
- Resolution of the AD converter: (analog channels) 16 bits, conversion duration approximately 60ms/channel
- Communication speed: 9600, 19200, 57600, 115200 Bd, 230400* Bd (* pro USB, Ethernet)
- Communication protocol: www, XML, SNMP, SOAP, ModbusTCP
- Alarm protocols: email, SNMP trap, Syslog
- Power: 24 Vdc
- Protection class :IP20
- Dimensions (including connectors): 215 x 225 x 44 mm
- Weight approx:800 g
- Warranty: 3 years
Features
The device allows:
measuring and processing 1 to 16 input signals
obtaining an autonomous time recording of the measured values
creating alarm states
performing other actions based on the created alarms (audible and visual indication, control of relay outputs, sending SMS messages, telephone dialer control, sending messages via various Ethernet interface protocols, etc.)
monitoring measured values and online statuses
independent setting of hysteresis, delay (for each channel separately)
configuring up to four alarm conditions (for each channel separately)
Common connectivity options:
The MS monitoring system can be configured for almost any desired measurement application. Sensors can be connected to the data logger in star-type connection as well as in series. The combination of both is also possible. The MS monitoring system is characterized by a wide range of communication interfaces, such as RS232, RS485, USB, Ethernet and GSM or GPRS modem. Using Wi-Fi routers, multiple MS measuring systems can be connected wirelessly to a network.
Parameters and measuring ranges of the MS6D configurable inputs
The MS6xx monitoring system is equipped with 16 freely programmable universal inputs. Each of these can be configured with the input signal according to the table below. This makes the monitoring system very flexible and user-friendly. The RS485 input must be ordered separately if you want to use the Modbus or Advantech communication interface.
Key features:
Software configurable inputs for Pt and Ni temperature sensors, thermocouples and thermistors, voltage and current, bi-state events, resistance, sensors with RS485 output
Memory for 500,000 records with automatic download to PC
Alarm indication via built-in siren, email, SMS and bi-state output to control other devices
Software for data analysis on PC
Communication interface USB, RS232, relays, RS485 (Modbus RTU), ETHERNET (Modbus TCP, SOAP, etc.)
