Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: VH400-2M
Brand: VEGETRONIX
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
PAYMENT METHODS
Water-cooled heat flux sensor
SBG01 is a water-cooled sensor that measures heat flux. The ISO standards call this a heat flux meter. Introduced in 2008, SBG01 has rapidly become the sensor of choice for fire testing. SBG01 is mainly used to test reaction to fire and fire resistance. It is also used as a calibration reference standard for test equipment, for example in flammability and smoke chamber tests. SBG01 complies with the requirements of the most common ASTM and ISO standard test methods.
Specifications
| Measurand |
| heat flux |
| Measurement range |
| (5, 10, 20, 50, 100, 200) x 10³ W/m² |
| Measurand (in SI units) |
| irradiance in W/m² |
| Sensor technology |
| both Gardon and Schmidt-Boelter |
| Rated cooling water temperature range |
| 10 to +30 °C |
| Rated cooling water flow |
| > 10 l/h (0.003 l/s) preferably 30 l/h (0.01 l/s) |
| Rated measurement ranges |
| (5, 10, 20, 50, 100, 200) x 10³ W/m² |
| Response time (63 %) at different measurement ranges |
| : |
| 5, 10 x 10³ W/m² |
| < 450 x 10⁻³ s |
| 20, 50 x 10³ W/m² |
| < 250 x 10⁻³ s |
| 100, 200 x 10³ W/m² |
| < 200 x 10⁻³ s |
| Limiting measurement range |
| 150 % of rated measurement range |
| Output signal |
| DC voltage |
| Output signal range |
| > 5 x 10⁻³ V at rated measurement range |
| Spectral range |
| 0 to 50 x 10⁻⁶ m |
| Full field of view angle |
| 180° |
| Black coating emissivity |
| > 0.90 |
| Calibration traceability |
| to ITS-90 |
| Calibration laboratory |
| : |
| -management system certification |
| ISO 9001 |
| -accreditation |
| not accredited |
| Calibration method |
| SBGC secondary calibration method according to ISO 14934-3 |
| Standard cable length |
| 2 m (see options) |
| Order code standard version |
| SBG01/rated measurement range/cable length |
Options
Description
There are 6 models of SBG01
The SBG01 measures heat flux in the range (5 to 200) x 10³ W/m². Equipped with a black absorber, heat flux sensors of this type are designed for measurement in an environment where heat flux is dominated by radiation. By using an open detector, the SBG01 is also sensitive to convective heat flux. This contribution is often ignored. Application in environments with irradiance levels below 50 x 10³ W/m² or environments with significant convective heat transport is possible, but requires careful assessment of measurement uncertainty.
The SBG01 thermopile sensor generates an output voltage proportional to the incoming irradiance. The sensor is water-cooled. There are 6 models of SBG01; each with a different nominal measurement range, calibration reference irradiance level, sensitivity and response time. Water cooling is usually done with tap water. There are several optional body designs. The standard body is fitted with a smooth cylindrical body and a flange. The most common options are a smooth cylindrical body without flange (model SBG03). In addition, a thermocouple (type T or K) can be fitted on request.
Advantages
The SBG01 has a novel sensor design, combining the benefits of the reed technology of traditional Gardon meters with those of the thermopile technology of traditional Schmidt-Boelter meters. The SBG01 has several advantages:
Robust and useful water tubes
Scratch-resistant absorbent coating (slightly recessed surface)
Safe storage with a practical protective cap
Suggested use
The SBG01 has quickly become the sensor of choice for fire testing. The SBG01 is primarily used for testing reaction to fire and fire resistance. It is also used as a calibration reference standard for test equipment, for example in flammability and smoke chamber testing.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: S500-EX
Brand: HUATO
Reference: S700-EX- WIFI
Brand: HUATO
Reference: Frigga® Smart
Brand: FRIGGA
Reference: U0121M
Reference: RK330-04
Brand: RIKA SENSORS
Reference: DL18
Brand: ECOMATIK
Reference: S220-T8
Brand: HUATO
Reference: SFL
Reference: FHF05SC
Brand: Hukseflux
Reference: FHF05-10X10 + 2m cable
Brand: Hukseflux
Reference: B Tempmate
Brand: tempmate
Reference: PC210
Brand: HORIBA LAQUAtwin
Reference: M2 T
Brand: tempmate
Reference: HE2508 GSM MODEM
Brand: HUATO
Reference: U3121
Brand: COMET
Water-cooled heat flux sensor
SBG01 is a water-cooled sensor that measures heat flux. The ISO standards call this a heat flux meter. Introduced in 2008, SBG01 has rapidly become the sensor of choice for fire testing. SBG01 is mainly used to test reaction to fire and fire resistance. It is also used as a calibration reference standard for test equipment, for example in flammability and smoke chamber tests. SBG01 complies with the requirements of the most common ASTM and ISO standard test methods.
check_circle
check_circle
