VH400 Soil Moisture Sensor Probe Specifications
Power consumption: < 13mA
Supply Voltage: 3.5V to 20 VDC.
Dimensions See drawing.
Power on to Output stable: 400 ms
Output Impedance: 10K ohms
Operational Temperature: -40ºC to 85ºC
Accuracy at 25°C: 2%
Output: 0 to 3V related to moisture content
Shell Color: Red
Voltage Output Curves: Curves, Piecewise...
A miniature, value-priced, waterproof data logger for temperature and light monitoring applications; stores 52K measurements.
IMPORTANT INFORMATION
Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1).
HOBOware Pro is required when using the HOBO Waterproof Shuttle. See compatible items below.
RK520-01 - Soil Moisture & Temperature Sensor to integrate the moisture and temperature measurement.The stainless steel probe is inserted into soil surface or soil profile to test soil moisture and temperature quickly. Moisture measurement part is designed on the basis of the principle of FDR, by measuring the dielectric constant of the soil in order to measure the volume of the soil moisture content, temperature part adopts precision platinum resistance element, the product built-in drift calibration and temperature compensation circuit, can adapt to most applications.The probe can be permanently embedded underground and be connected to a data logger for unlimited testing.
SPECIFICATIONS
Item
Technical Specification
Moisture
Temperature
Range
0-100%（m3/m3）
-30℃-+70℃
Accuracy
±3%(0-50%)
±0.3℃
Output Signal
4-20mA ,0-5V,0-2V,RS485 optional
Response Time
<1s
Supply
5VDC, 12-24VDC
Effective measurement area
With the center of the probe diameter is 70mm, high 70mm cylinder
Housing
ABS
Dimensions
71*45*16mm( probe:2* Ø3*55mm,1*Ø4*55mm)
Operating Temperature
-40℃-+80℃
Ingress Protection
IP68
Storage
10-60℃@20%-90%RH
Probe material
316L stainless steel
1.Testing medium should be with uniform intensity.
2. If surface soil water content measurement, the sensor should be insert into soil vertically. Do not shake the sensor when inserted, otherwise the probe will be blended;
3. If multi-layer soil water content measurement, the sensor should be buried in the soil and parallel to the ground. Make sure the probe not be blended;
4. When removing sensors from the soil, please hold the sensor housing shell and do not forcibly pull on the cable. Soil on probes should be brushed tightly.
5. Please keep the sensor in dry & clean conditions.
Product Details
RK520-01-4-20mA
Comments (0)
Grade
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
RX3004-SYS-KIT-813 HOBO RX3000 Remote Weather Station Starter Kit
This kit provides instant access to site-specific air temperature, relative humidity, and wind speed & direction data anywhere, at any time, from your desktop or mobile device.
Important InformationHOBOlink is a web-enabled software platform designed for the RX3000. Learn more. The cost...
Features
Compact size for easy deployment
Weatherproof IP66 enclosure for harsh environments
Direct USB offload--no need for an adapter cable
Includes five Smart Sensor inputs
Hinged door and integrated mounting tabs
Runs for up to a year on four standard AA batteries
Compatible with HOBOware and HOBOware Pro software for logger setup and graphing &...
S-SMC-M005 EC5 Soil Moisture Smart Sensor
Small area of influence
An affordable soil moisture smart sensor with a two-tine design for easy installation; integrates the field-proven ECH2O™ EC-5 Sensor and a 12-bit A/D. An affordable soil moisture smart sensor with a two-tine design for easy installation; integrates the field-proven ECH2O™ EC-5 Sensor and a...
TEROS 11 Advanced Soil Moisture & Temperature Sensor
Advanced soil humidity and temperature probe TEROS 11 from METER Group, with large volume of influence, field and laboratory applications.
Robust and best value for money.
TEROS 12 Soil and Substrate Moisture and Electrical Conductivity Probe from METER Group, to measure humidity, temperature and electrical conductivity (EC) in soil and substrates. Robust and best value for money.
15 Channel Energy Monitoring and Weather Station Data Logger
A rugged weather station for outdoor environmental monitoring; easily configurable for specific application needs, with up to 15 channels to collect environmental data.
Required software
HOBOware Pro + CABLE-USBMB
External sensors sold separately.
EC-5 Soil Moisture Sensor
Technical Specifications:
Accuracy: ± 3% in all soils
± 2% with specific calibration
Voltage: 2.5-3.6 VDC @ 10mA
Oscillator frequency: 70MHz.
Measurement Time: 10ms
Output: Voltage correlated linearly (soil) or polynomially
(growing medium) with the VWC
Cable Length: 5 or 10m.
Standard 3.5mm stereo connector
Environmental...
SpotOn® Turf Moisture Meter
One year warranty
Patent pending
Quick and accurate soil moisture, EC (salinity), and temperature readings in a compact and durable design.
Includes 2 sets of rods!
SpotOn® Pocket Soil Moisture Meter
One year warrantyPatent pendingQuick & Accurate Soil Moisture, EC And Temperature Readings For Mineral & Soilless Media With Bluetooth ® Connectivity To Spotview™ Mobile App.
Combines our rugged data logging weather station with out-of-the-box convenience. The HOBO U30 USB weather station accepts up to 10 plug-and-play Smart Sensors. Just plug in your sensor and it's automatically recognized - no programming, wiring or calibration necessary. With this kit you can measure temperature, relative humidity, and wind speed &...
