Reference: UA-002-64

Brand: ONSET

UA-002-64 HOBO Pendant Temperature/Light 64K Data Logger

(0)
A miniature, value-priced, waterproof data logger for temperature and light monitoring applications; stores 52K measurements.  IMPORTANT INFORMATION Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1). HOBOware Pro is required when using the HOBO Waterproof Shuttle. See compatible items below.

Reference: VH400-2M

Brand: VEGETRONIX

VH400 - Low-Cost Soil Moisture Sensors

(0)
VH400 Soil Moisture Sensor Probe Specifications Power consumption: < 13mA Supply Voltage: 3.5V to 20 VDC. Dimensions See drawing. Power on to Output stable: 400 ms Output Impedance: 10K ohms Operational Temperature: -40ºC to 85ºC Accuracy at 25°C: 2% Output: 0 to 3V related to moisture content Shell Color: Red Voltage Output Curves: Curves, Piecewise...
All best sellers
  • PAYMENT METHODS

  • New
Measurement Set 1 MYJ
  • Measurement Set 1 MYJ

H-TEC 1 Measurement Set 1

12120008

H-TEC 1 Measurement Set 1

The H-TEC Measurement Set 1 is an experimentation kit consisting of a decade resistor, two multi-meters, stopwatch and cables.  The Measurement Set is completely compatible for all of the H-TEC Tutorial product range, as well as H-TEC Junior products.

Description

Experiments Made Possible With The Measurement Set, A129:
✔ Determining characteristic curves of solar panels
✔ Determining characteristic curves of electrolysers
✔ Determining electrolyser efficiency
✔ Determining characteristic curves of fuel cells
✔ Determining fuel cell efficiency
✔ Determining decomposition voltage of water

Technical Specifications:


Decade Resistor:
• Max. Capacity: 1 W
• Port Sizes: 2 mm
• Weight: 6.7 oz (190 g)
• Dimensions (H x W x D): 1.6" x 6.3" x 5.1" (40 x 160 x 130 mm)

Multimeters:
• Port Sizes: 2 mm
• Weight: 4.9 oz (140 g)
• Dimensions (H x W x D): 4.9" x 2.8" x 1.2" (125 x 70 x 30 mm

Product Details
12120008
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:

Reference: LAQUAtwin Salt-22

Brand: HORIBA LAQUAtwin

Salt-22 LAQUAtwin Pocket Water Quality Meter

(0)
Salt-22 LAQUAtwin Pocket Water Quality Meter The only pocket meter that directly measures the sodium ion concentration in a 0.3 mL sample (or 0.05 mL with Sampling Sheet B) and converts it to salinity or NaCl salt concentration. No beaker is needed to calibrate the meter or measure a sample. Simply place a few drops of the standard or sample on the...

Reference: 12120027

Brand: FUEL CELL

Fuel Cell H2/O2

(0)
Fuel Cell H2/O2 H-TEC's Fuel Cell H2/O2 is a single-cell Proton Exchange Membrane Fuel Cell (PEMFC) for hydrogen and oxygen operation.  Running your fuel cell on pure Oxygen versus just Atmospheric Oxygen (Air) will provide a much higher performance with greater results!

Reference: 12120036

Brand: FUEL CELL

H-TEC's Junior Basic Solar Hydrogen

(0)
H-TEC's Junior Basic Solar Hydrogen H-TEC's Junior Basic, J101 is a Solar Hydrogen Experimentation System consisting of solar module, PEM Electrolyser, hydrogen and oxygen storage tanks, PEM fuel cell and fan (for electric load); mounted on a black base-plate, and textbook.  The included H-TEC Education fuel cell textbook contains information about the...

Reference: LAQUAtwin pH-22

Brand: HORIBA LAQUAtwin

LAQUAtwin pH-22 - Pocket Water Quality Meters

(0)
Specs: Range: 0 to 14 pH Resolution: 0.01 pH Accuracy: ±0.01 pH mV: ±650mV/1mV Calibration: 3 points Standard solution pH4.01 Standard solution pH7.00 Replacement electrode also available Ref.: 86129 The pH-22 pH meter is supplied with: 2 CR2032 batteries 1 pipette. Instruction manual and quick guide. Storage case. pH4 calibration solution (14 ml). pH7...

Reference: LAQUAtwin Ca‐11

Brand: HORIBA LAQUAtwin

LAQUAtwin Ca‐11 Calcium Ionometer

(0)
LAQUAtwin Ca‐11 Calcium Ionometer It is a calcium meter used in a wide variety of analyses and measurements. It measures calcium reliably and is very easy to use. It takes only a few seconds to give a result, making it an ideal instrument for field analysis.

Reference: FHF05

Brand: Hukseflux

FHF05 Series Heat Flux Sensors

(0)
Foil heat flux sensors with thermal spreaders, flexible, different dimensions, with temperature sensor Available in five models: order the model required for your application!FHF05 is the product range to start looking if you consider measuring heat flux. Models are available in five different dimensions and sensitivities. All FHF05’s are flexible, have...

Reference: SBG01

Brand: Hukseflux

SBG01 Heat Flux Meter

(0)
Water-cooled heat flux sensor SBG01 is a water-cooled sensor that measures heat flux. The ISO standards call this a heat flux meter. Introduced in 2008, SBG01 has rapidly become the sensor of choice for fire testing. SBG01 is mainly used to test reaction to fire and fire resistance. It is also used as a calibration reference standard for test equipment,...

Follow us on Facebook