Description
Disassemble and reassemble your own fuel cell from individually connected cells with the Flex-Stak electrochemical cell. The Flex-Stak comes in a 1- or 5-cell stack configuration, depending on your needs. Ease of use makes it simple to scale the Flex-Stak to different power levels and integrate equipment and/or sensors. The Flex-Stak fuel cell is an excellent learning tool that provides hands-on experience with promising fuel cell technology. Whether it’s advanced MEA research, setting up your own fuel cell lab, or conducting professional training, the Flex-Stak has a wealth of practical applications.
The Flex-Stak electrochemical cell comes without a MEA and with independent, enclosed flow channels that allow reactant flows on both sides of a membrane. Only a flathead screwdriver (1/4-inch) and a torque wrench (1 in/lb, 3/8-inch nut) are needed to assemble the Flex-Stak electrochemical cell so you can focus on creating your own applications.
Stack contents include:
✔ Plastic end plates
✔ Anode configuration on both sides of the bipolar plate
✔ Expandable design
✔ No MEAs are included with this flex-stak
✔ Hardware
Technical properties:
• MEA active area: 3.2 x 3.2 cm (10 cm²)
• MEA membrane area: 5.3 x 5.3 cm
• Connections: 4 x 1/8" Push-to-connect (2 per reagent side)
• Graphite plate overall dimensions (L x W x D): 6.3 x 6.3 x 0.4 cm
• Recommended torque value: 6-7 in. lb
