| Specifications |
Wind Speed/Gust (S-WSB-M003) |
Wind Direction (S-WDA-M003) |
| Measurement Range |
0 to 76 m/s (0 to 170 mph) |
0 to 355 degrees, 5 degree dead band |
| Maximum Wind Speed Survival |
76 m/sec (170 mph) |
67 m/sec (150 mph) |
| Accuracy |
± 1.1 m/s (2.4 mph) or |
± 5 degrees |
|
± 4% of reading whichever is greater |
|
| Resolution |
0.5 m/s (1.1 mph) |
1.4 degrees |
| Starting Threshold |
1.0 m/s (2.2 mph) |
1.0 m/s (2.2 mph) |
| Measurement Definition |
Cup revolutions are accumulated every three seconds for the duration of the logging interval. Wind speed is the average speed for the entire logging interval. Gust speed is the highest three-second wind recorded during the logging interval. |
Unit vector components of wind direction are accumulated every three seconds for duration of logging interval. Average direction is calculated from the average of these. |
| Operating Temperature Range |
-40°C to +75°C (-40°F to +167°F) |
-40°C to +70°C (-40°F to +158°F) |
| Environmental Rating |
Weatherproof |
Weatherproof |
| Service Life |
Greater than 5 years typical |
4 to 6 years typical depending upon environmental conditions |
| Housing |
Three cup polycarbonate anemometer: Modified Teflon® bearings and hardened beryllium shaft with ice shedding design |
Injection-molded housing and vane, static dissipating base, lead-free silicon bronze nose, and aluminum mounting rod. |
| Bearing Type |
Modified Teflon® bearings |
two shielded stainless steel ball bearings |
| Turning Radius |
9.5 cm (3.75 in.) |
Approximately 13.5 cm (5.25 in.) |
| Dimensions |
41 x 16 cm (16 x 6.5 in.) including 1.27 cm (0.5 in) diameter mounting rod; 5.5 cm (2.1 in.) drip overhang |
46 x 20 cm (18 x 8.5 in) including 1.27 cm (0.5 in) diameter mounting rod, 2.5 mm (0.1 in) drip overhang |
| Weight |
Approximately 700 g (1.5 lbs) |
Approximately 370 g (13 oz) |
| Number of Data Channels |
2 |
1 |
| Measurement Averaging Option |
No |
Automatic averaging (see Measurement Definition) |
| Cable Length Available |
3.5 m (11.5 ft) |
3.5 m (11.5 ft) |
| Length of Smart Sensor Network Cable |
0.5 m (1.6 ft) |
0.5 m (1.6 ft) |
| CE |
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU) |
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU) |
| Part Number |
S-WSB-M003 |
S-WDA-M003 |
