Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: VH400-2M
Brand: VEGETRONIX
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
PAYMENT METHODS
U3121M IoT Wireless Temperature and Relative Humidity Data Logger for External Probe
GSM datalogger is designed to record temperature and humidity from external probe. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system.
It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper.
The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable.
The temperature and humidity probe is not included in delivery, probe of the appropriate length and design you can choose in optional accessories.
The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
Technical data
Measured value
Temperature
Relative humidity
Counted values (dew point…)
TEMPERATURE SENSOR
Measuring range according to the connected probe Digi/E
Accuracy according to the connected probe Digi/E
Resolution 0.1 °C
Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) 8 min
HUMIDITY SENSOR
Measuring range according to the connected probe Digi/E
Accuracy according to the connected probe Digi/E
Resolution 0.1% RH
DEW POINT
Measuring range according to the connected probe Digi/E
Accuracy according to the connected probe Digi/E
Resolution 0.1 °C
GSM MODEM PARAMETERS
Quad-band 850/900/1800/1900MHz
Compliant to GSM Phase2/2+
GPRS GPRS mobile station class B
Class 4 2W @ 850/900MHz
Class 1 1W @ 1800/1900MHz
GENERAL TECHNICAL DATA
Operating temperature: -20 to +60 °C
Channels: 1x connectable temperature+humidity probe
Memory: 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode
Recording interval to the internal memory adjustable from: 1 second to 24 hours
Recording interval: to the COMET Cloud from 5 minutes
Interval for measuring and evaluating alarms adjustable 1 s, 10 s, 1 min
Recording mode noncyclic: - data logging stops after filling the memory
cyclic - after filling memory oldest data is overwritten by new
Real time clock: year, leap year, month, day, hour, minute, second
Power rechargeable Li-Ion battery A8200, 3.6V/5200mAh
Protection class: IP67
Dimensions: 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm
Weight (including batteries): approx. 260 g
Warranty: 3 years
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: PX3UXX05
Brand: VERIS
Reference: CD4
Brand: BOSEAN
Reference: RSTAR Affinity Tilt Logger
Reference: SP-420
Brand: Apogee Instruments
Reference: U6841
Brand: COMET
Reference: DS9107+
Brand: iBUTTON MAXIM INTEGRATED
Reference: RK510-01
Brand: RIKA SENSORS
Reference: 12120024
Brand: FUEL CELL
Reference: SP-510-SS
Brand: Apogee Instruments
Reference: T3610
Brand: COMET
Reference: RK110-02
Brand: RIKA SENSORS
Reference: BLK - GLD
Brand: Hukseflux
Reference: 40470
Brand: Innoquest, Inc.
Reference: Wet&Dry + QAS22024
Reference: SO-110
Brand: Apogee Instruments
Reference: LS330
Brand: LINSHANG
U3121M IoT Wireless Temperature and Relative Humidity Data Logger for External Probe
GSM datalogger is designed to record temperature and humidity from external probe. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system.
It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper.
The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable.
The temperature and humidity probe is not included in delivery, probe of the appropriate length and design you can choose in optional accessories.
The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
check_circle
check_circle
