U5841G Data logger for 3 voltage inputs 0-10V and 1 two-state input, with built-in 4G modem

Technical data

Measured value

Voltage

Two-state signal

VOLTAGE INPUT

Measuring range 0 to 10 V DC
Accuracy ±10 mV
Input resistance approx. 130 Ω

BINARY INPUT

Parameters of the voltage contact „L“ level input voltage:< 0,8 V(*);
„H“ level input voltage:> 2 V;
Minimum voltage applicable:0 V;
Maximum voltage applicable:+30 V DC
Parameters of the voltage-free contact Contact resistance in „switched-on“ state:< 10 kOhm;
Contact resistance in the „switched-off“ state:> 2 MOhm;
Contact voltage in the „switched-off“ state:ca 3 V;
Minimum state duration necessary for latching the state:1s


GSM MODEM PARAMETERS

LTE Cat 1 LTE FDD/GSM/GPRS/EDGE
Supported network types GSM/GPRS/EDGE 900/1800 MHz
LTE FDD B1/B3/B5/B7/B8/B20

GENERAL TECHNICAL DATA

• Operating temperature: -20 to +60 °C
• Channels: 3x current input, 1x binary input
• Memory: 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode
• Recording interval to the internal memory adjustable from: 1 second to 24 hours
• Recording interval: to the COMET Cloud from 5 minutes
• Interval for measuring and evaluating alarms adjustable: 1 s, 10 s, 1 min
• Recording mode noncyclic -: data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new
• Real time clock: year, leap year, month, day, hour, minute, second
• Power rechargeable: Li-Ion battery A8200, 3.6V/5200mAh
• Protection: class IP20
• Dimensions: 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm
• Weight (including batteries): approx. 270 g
• Warranty: 3 years