- New
Reference: 10HS ECHO - 5Mts
10HS ECHO DECAGON Soil Moisture Sensor (Large Volume)
Soil Moisture Sensor from Decagon Devices.
- APPLICATIONS
- CATALOGS
- PRODUCTS
- BROWSE BY MEASUREMENT
- 4-20mA
- ABSOLUTE PRESSURE
- AC CURRENT
- AIR DIRECTION
- AIR QUALITY
- AIR TEMPERATURE
- AMPERES (A)
- BAROMETRIC PRESSURE
- CARBON DIOXIDE
- COMPRESSED AIR
- COMPRESSED AIR FLOW
- CONDUCTIVITY
- DC CURRENT
- DENDROMETERS
- DEW POINT
- DIFFERENTIAL PRESSURE
- DUST SENSOR
- ELECTRICAL CONDUCTIVITY (SOIL)
- ELECTRICAL CONDUCTIVITY (WATER)
- ELECTRICAL NETWORK ANALYZERS
- ENGINE ON/OFF
- EVAPOTRANSPIRATION
- GAUGE PRESSURE
- ILLUMINANCE
- KILOWATT HOURS (kWh)
- KILOWATTS (kW)
- LEAF MOISTURE
- LIGHT INTENSITY
- NOISE
- OXYGEN
- PAR RADIATION
- PARTICLE COUNTERS
- PH
- PULSE INPUT
- RAINFALL
- RELATIVE HUMIDITY
- REMOTE WATER LEVEL MONITORING
- SALINITY
- SOIL HUMIDITY
- SOIL TEMPERATURE
- SOIL WATER POTENTIAL
- SOLAR RADIATION
- TEMPERATURE
- THERMOCOUPLE
- UV RADIATION
- VELOCIDAD AIRE
- WATER FLOW
- WATER LEVEL
- WATER PRESSURE
- WATER TEMPERATURE
- WIND
- BY ENVIRONMENT
- BY TYPE
- WEATHER STATIONS
- BROWSE BY MEASUREMENT
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
DS1922E-F5 High-Temperature Logger iButton, 8KB Datalog Memory
DS1922E-F5 High-Temperature Logger iButton
Applications
High-Temperature Logging (Process Monitoring, Industrial Temperature Monitoring)
Steam Sterilization
Reference: DS9107+
Brand: iBUTTON MAXIM INTEGRATED
DS9107+ Capsule for Immersing iButton in Liquids
DS9107+
The iButton® Capsule is a mechanical enclosure to protect Temperature Logger iButtons (DS1921 and DS1922 series) from moisture, solvents and pressure.
Reference: INTEGRADOR S10 MINI
Brand: Meatrol
INTEGRADOR S10 MINI
The S10 is a mini Rogowski coil integrator combined with power meter or PLC, in a plastic case, powered directly from the main one.
-
PAYMENT METHODS
514‐50 Standard Solution (Sodium Chloride 5.0%) 6x14 ml
514‐50 Standard Solution (Sodium Chloride 5.0%) 6x14 ml
For calibration point of LAQUAtwin Salt-22 and LAQUAtwin Salt-11 meter
Each bottle of calibration solution allows for approximately 30 calibrations
Volume of each bottle 14 ml
Set of 6 bottles.
Product Details
514‐50
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
Reference: TR-50U2
Brand: TandD
TR-50U2 USB Compact Communication Interface for TR-5i Series Loggers
TandD TR-50U2
Comm Interfaces: USB, Optical
Power: USB Bus Power
Operating environment:
Temperature: -10 to 60°C
Humidity: less than 90%RH (No condensation)
Do not use if the Data Logger is wet.
Dimensions: H:80mm × W:56mm × D:16.5mm
Accessories: USB Communication Cable, Software(CD-ROM), Manual
The TR-50U2 is a communication cradle necessary for...
Reference: RK200-03
Brand: RIKA SENSORS
RK200-03 Solar radiation pyranometer
The pyranometer radiation sensor is a monitoring device designed to accurately measure solar radiation levels
Reference: S071
Brand: HORIBA LAQUAtwin
S071 Sodium Chloride Replacement EC Electrode (Measuring Range: 0.1-10%)
S071 Sodium Chloride Replacement EC Electrode (Measuring Range: 0.1-10%)
Replacement sensor for LAQUATwin Salt-11 Salinometer.Conductivity electrode for Sodium Chloride that is so selective that pH or other ions do not affect it.
Reference: ExpressThermo
Brand: iBUTTON MAXIM INTEGRATED
ExpressThermo - Licence for Windows 10 and 11
Reference: ZRC-50
Brand: Meatrol
ZRC-50 Thin Flexible Rogowski coil
* High linearity from 1A to 100kA*Wide dynamic range*Very useful with large or awkwardly shaped conductors or in places with limited access*There is no danger from the open secondary circuit*Not damaged by large overloads*Non-intrusive, no power is drawn from the main grid.* Measurement uniformity at any position of the conductor within the...
Reference: STP-5
Brand: Meatrol
3 in 1 RJ45 port Current Sensor STP ME238
Advantage• Calibrated to 0.5%• Much easy to install through RJ45• Easy to fixed on bus-bar or cable by cable ties• Very competitive priceRelated ProductsOnly for ME238
Reference: S9.4
Brand: Meatrol
S9.4 Waterproof Integrator
The S9.4 is a waterproof Rogowski coil integrator combined with a power meter or PLC, in a plastic housing, directly powered of the electrical network.
-Rated input::100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)
-Rated output:4-20mA
-Rated coil ratio:50mV/kA or 85mV/kA(need to be define)
-Accuracy:±0.5%(from 1% to 100%)
-Bandwidth:5Hz to 20KHz...
Reference: S070
Brand: HORIBA LAQUAtwin
S070 Replacement Conductivity / TDS sensor for B‐771, EC11, EC22 and EC33
Replacement sensor for LAQUAtwin EC-11, LAQUAtwin EC-22 and LAQUAtwin EC-33 conductivity meterFollowing the same principle as standard laboratory electrodes, LAQUAtwin contains all components in a flat sensor less than 1 mm thick.Water-resistant structure protects the instrument.
Reference: FS1309-MBR-A31-X
Brand: FUEHLER SYSTEME
FS1309 Oxygen Transducer for Surface Mounting, Modbus RTU
FS1309 Oxygen Transducer for surface mounting, Modbus RTU
The device is designed for indoor use or in protected outdoor areas.
0...25% vol. optional 0...100% vol.
Modbus RTU, relay
LCD-Display
hinge lock technology
Reference: MX2304
Brand: ONSET
MX2304 HOBO External Temperature Sensor Data Logger
MX2304 HOBO - Bluetooth-enabled logger
A weatherproof data logger with one external temperature sensor, leveraging Bluetooth for easy setup and data download.
IMPORTANT INFORMATION
Requires a compatible mobile device or Windows computer and the HOBOconnect app.
Reference: DS1923-F5
Brand: iBUTTON MAXIM INTEGRATED
DS1923-F5 Hygrochron Temperature/Humidity Logger
The DS1923-F5 is a Hygrochron type Relative Humidity and Temperature Data Logger (-20ºC to +85ºC and 0-100% RH) 8 KB Data Logging Memory
Reference: DS1402D-DR8+
Brand: iBUTTON MAXIM INTEGRATED
DS1402D-DR8+ -1-Wire- Network Cable, Blue Dot for use with DS9490R
Reference: F800 COMETEO
Brand: COMET
F800 COMETEO Professional Multi-Plate Radiation Shield for Weather Sensors
Features
Multi-board design for passive ventilation
Compatibility with a wide range of weather sensors
Rugged protection for outdoor applications
Proven resistance in extreme environments such as Antarctica
Reference: Wet&Dry + QAS22024
Brand: NESA
Wet&Dry + QAS22024 Passive Sampler (Mains Power Supply)
Wet&Dry + QAS22024 Passive Sampler (Mains Power Supply)
Highlighted specs
Self-registering positioning system
For all environmental conditions (ice, snow, salinity, sand, high and slow temperature)
Compact and light design in anodized aluminium, easy to move
Available with auto power by solar panel
High durability
Easy to use and install
According to...
514‐50 Standard Solution (Sodium Chloride 5.0%) 6x14 ml
For calibration point of LAQUAtwin Salt-22 and LAQUAtwin Salt-11 meter
Each bottle of calibration solution allows for approximately 30 calibrations
Volume of each bottle 14 ml
Set of 6 bottles.