
Reference: 10HS ECHO - 5Mts
Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: VH400-2M
Brand: VEGETRONIX
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
Strain Gauge and Vibrating Wire Pressure Transducers are used for uplift measurement in the foundation of concrete dams, overflow settlement measurement in earthfill and rockfill dams, and all other applications where a rugged and reliable pressure transducer is required for measuring fluid pressure in closed circuits.
Product Features
Overview
Strain Gauge and Vibrating Wire Pressure Transducers are used for uplift measurement in the foundation of concrete dams, overflow settlement measurement in earthfill and rockfill dams, and all other applications where a rugged and reliable pressure transducer is required for measuring fluid pressure in closed circuits.
The pressure transducers come with either a 1/4” NPT thread or a 1/4” or 1/8” NPT port, for easy connection to pipes or other components of the hydraulic circuit to be monitored. Both transducers can be read dynamically if required by the application.
Highly reliable lightning protection is standard for the strain gauge transducer and for the vibrating wire transducer.
ITEM | SPECIFICATION |
Accuracy | ±0.1% FS |
Standard Pressure Ranges | 0.035 MPa through 103 MPa |
Compensated Temp. Range | -10°C to 80°C |
Field Rangeability | Yes |
Signal Output | 4-20 mA |
0-5 VDC | |
0-10 VDC | |
4-20 mA + RS485 | |
0-5 VDC + RS485 | |
Temperature Output | Optional |
Wetted Materials | Standard 316L SS |
Polyamide | |
Fluorocarbon | |
Electrical Termination | Sealed Cable |
Dimensions | 109 mm X Ø25 mm |
NPT Thread | 1/4 inch male with a 1/4” or |
1/8” NPT thread |
ITEM | SPECIFICATION |
Over range | 1.5 X F.S. |
Resolution | 0.025% F.S. minimum |
Accuracy | 0.1% F.S. |
Standard Pressure Ranges | 0.07 through 20 MPa |
Operating Temperature | -20 to 80°C (-4 to 176°F) |
Diaphragm Displacement | <0.001 cc at F.S. |
Thermal Zero Shift | <0.05% F.S./°C |
Materials | Hermetically sealed stainless steel housing |
Thermistor Type | NTC 3K Ohms @ 25°C |
Thermistor Interchangeability | ±0.2°C |
Thermistor Resolution | 0.1°C |
Dimensions | 150 mm X 25 mm |
NPT Thread | 1/4 inch female with a 1/4” or |
1/8” NPT thread |
Vibrating wire and strain gauge pressure transducers are commonly used for:
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: K-600M
Brand: BOSEAN
Reference: LS125
Brand: LINSHANG
Reference: K-600
Brand: BOSEAN
Reference: SR05-LI19
Brand: Hukseflux
Reference: PHYTOS 31
Brand: METER GROUP
Reference: MX2202
Brand: ONSET
Reference: TR41A
Brand: TandD
Reference: MS55D
Brand: COMET
Reference: MS6D
Brand: COMET
Reference: RTR-574-S
Brand: TandD
Reference: DLI-600
Brand: Apogee Instruments
Reference: MC-100
Brand: Apogee Instruments
Reference: K-600
Brand: BOSEAN
Reference: TR-51i
Brand: TandD
Reference: S1 V2 Tempmate
Brand: tempmate
Strain Gauge and Vibrating Wire Pressure Transducers are used for uplift measurement in the foundation of concrete dams, overflow settlement measurement in earthfill and rockfill dams, and all other applications where a rugged and reliable pressure transducer is required for measuring fluid pressure in closed circuits.
Product Features
check_circle
check_circle