
Reference: VH400-2M
Brand: VEGETRONIX
Reference: VH400-2M
Brand: VEGETRONIX
Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
Temperature Data logger for four External Pt1000 Probes
Datalogger is designed to record temperature from four external Pt1000 probes connected to the terminal block.
The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via USB-C.
In case of exceeded set limits alarms are indicated by LED, LCD and acoustically by built-in beeper.
The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
Included in delivery:
U0141T
Instruction manual
Traceable calibration certificate
1x 3.6V lithium battery
FREE FULL VERSION COMET Vision analytical software
Technical Data
Measured value
Temperature
TEMPERATURE SENSOR - external probe Pt1000
Measuring range -200 to +260 °C
Accuracy ±0.2°C; ±0,2 % of the measurement value in a range of +100 to +260 °C
Resolution 0.1 °C
Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) according to the connected probe
GENERAL TECHNICAL DATA
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: MX2203
Brand: ONSET
Reference: GM2 Tempmate
Brand: tempmate
Reference: RX3004-SYS-KIT-813
Brand: ONSET
Reference: 7210
Brand: DAVIS INSTRUMENTS
Reference: RK500-01
Brand: RIKA SENSORS
Reference: RTR507B
Brand: TandD
Reference: PF-110
Brand: Apogee Instruments
Reference: 6475
Brand: DAVIS INSTRUMENTS
Reference: RTR-602L
Brand: TandD
Reference: U0141G
Brand: COMET
Reference: TR-73U
Brand: TandD
Reference: HE500M
Brand: HUATO
Reference: MX2204
Brand: ONSET
Reference: LS330
Brand: LINSHANG
Reference: K-40
Brand: BOSEAN
Reference: LS129-UVALED
Brand: LINSHANG
Temperature Data logger for four External Pt1000 Probes
Datalogger is designed to record temperature from four external Pt1000 probes connected to the terminal block.
The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via USB-C.
In case of exceeded set limits alarms are indicated by LED, LCD and acoustically by built-in beeper.
The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
check_circle
check_circle