All best sellers
  • PAYMENT METHODS

K-600N 6 in 1 Multi Gas Detector (IP67) BOSEAN MYJ
  • K-600N 6 in 1 Multi Gas Detector (IP67) BOSEAN MYJ
  • K-600N 6 in 1 Multi Gas Detector (IP67) BOSEAN MYJ
  • K-600N 6 in 1 Multi Gas Detector (IP67) BOSEAN MYJ
  • K-600N 6 in 1 Multi Gas Detector (IP67) BOSEAN MYJ
  • K-600N 6 in 1 Multi Gas Detector (IP67) BOSEAN MYJ

K-600N 6 in 1 Multi Gas Detector (IP67)

K-600N

K-600N diffusion multi-gas detector is a new intelligent gas detector, which adopts an advanced integrated circuit, with standard intelligent level design technology, and proprietary digital analog hybrid communication technology. The detector is of excellent sensitivity and repeatability, which makes it very easy to use and maintain. Thus greatly meets the safety requirements of industrial sites with high reliability. The detector is made of high-strength engineering plastics, compound nonslip rubber, which is of high strength and good hand feeling. 

The detector is:

  • Water-proof
  • Dust-proof 
  • Explosion-proof
Description

INTRODUCTION

1、Humanized GUI operation interface.Using dot matrix screen display.

2、Three-button operation mode, easy and intuitive to operate.

3、Sound, light, vibration and display four alarm methods.

4、Support gas unit switching function.

5、support multi-point calibration, up to 5-point calibration.

6、Support connecting to the computer software to read data.The USB interface adopts the Type-C interface

7、Simultaneously detecting 6 gases. 240*160 high-resolution screen display.

Gas sampling method Natural diffusion
Display method Dot matrix screen, resolution 240x160 px
Accuracy ≦±5% F.S.
Response Time T9o<30s(Depending on the gas sensor)
Indication LCD displays real-time and system status; 
LED, audio and vibration alert for gas leakage, fault and low voltage. 
Working environment Working temperature: -10℃~55℃
working humidity: 15%RH ~95%RH (no dew)
Power Source DC3.7V  Li-on battery, 1800mAh
Charging time 6h~8h
Working time ≧8h continuously (without alarming)
Gas Sensor Life 2 years
Explosion-proof grade Ex ib IIC T4 Gb
Protection Grade IP67
Alarm method sound, light, vibration and display four alarms
Dimensions 165mm×90mm×50mm(L × W × H)
Model Range Resolution L-alarm H-alarm
CO 0-1000ppm 1ppm 50ppm 150ppm
O2 0-30%vol 0.1%vol 19.5%vol 23.5%vol
H2 0-1000ppm 1ppm 50ppm 150ppm
H2S 0-100ppm 0.1ppm 10ppm 20ppm
CH4 0-100%LEL 1%lel 20%LEL 50%LEL
C2H4O 0-100ppm 1/0.1ppm 20ppm 50ppm
EX 0-100%LEL 1%lel/1%vol 20%LEL 50%LEL
C3H8 0-100%LEL 1%lel/1%vol 20%LEL 50%LEL
C2H5OH 0-100%LEL 1%lel/1%vol 20%LEL 50%LEL
NH3 0-100ppm 0.1/1ppm 20ppm 50ppm
CL2 0-20ppm 0.1ppm 5ppm 10ppm
O3 0-10ppm 0.1ppm 2ppm 5ppm
SO2 0-20ppm 0.1/1ppm 5ppm 10ppm
PH3 0-20ppm 0.1ppm 5ppm 10ppm
CO2 0-5000ppm 1ppm/0.1%vol 1000ppm 2000ppm
NO 0-250ppm 1ppm 50ppm 150ppm
NO2 0-20ppm 0.1ppm 5ppm 10ppm
HCN 0-50ppm 0.1/0.01ppm 10ppm 20ppm
HCL 0-20ppm 0.001/0.1ppm 5ppm 10ppm
CH2O 0-20ppm 1/0.1ppm 5ppm 10ppm
HF 0-100ppm 0.01/0.1ppm 2ppm 5ppm
C7H8/C8H10 0-20ppm 0.01/0.1ppm 5ppm 10ppm

Product Details
K-600N
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:

Reference: Mi550

Brand: Meatrol

Mi550 Portable Three Phase Power Quality Analyzer

(0)
Mi550 Portable Three Phase Electrical Power Quality Analyzer Externally Connected with Open Type Rogowski Coilor voltage CT, can perform cable testing without dismantling, simplify testing steps, save construction costs,and is more suitable for engineering testing as well as system distribution inspection and maintenance.

Reference: LAQUAtwin pH-11

Brand: HORIBA LAQUAtwin

LAQUAtwin pH-11 - Pocket Water Quality Meters

(0)
Specs: Range: 0 to 14 pH Resolution: 0.01 pH Accuracy: ±0.1 pH mV: ±650mV/1mV Calibration: 2 points Standard solution pH4.01 Standard solution pH7.00 Replacement electrode also available Ref.: 84211 The pH-11 pH meter is supplied with: 2 CR2032 batteries 1 pipette. Instruction manual and quick guide. Storage case. pH4 calibration solution (14 ml). pH7...

Reference: U20L

Brand: ONSET

U20L HOBO Water Level Data Logger

(0)
U20L HOBO Water Level Data Logger A low-cost, research-grade data logger for continuous monitoring of water level and temperature at depths of up to 13, 30, or 100 feet in a wide range of underwater environments; for use in freshwater or saltwater.  IMPORTANT INFORMATION Requires HOBOware Pro software and either a U-DTW-1 Waterproof Shuttle or the...

Reference: HF03-LI19

Brand: Hukseflux

HF03-LI19 - HEAT FLUX SENSOR

(0)
Portable heat flux sensor, with read-out unit / datalogger HF03 is a heat flux sensor that is applied in mobile measurements. It is combined with LI19, a high accuracy handheld read-out unit / datalogger. The combination HF03- LI19 is typically used to study heat flux levels of flares and fires, and to verify the performance of permanently installed flare...

Reference: H21-USB

Brand: ONSET

H21-USB - HOBO USB Microstation Data Logger

(0)
Features Compact size for easy deployment Weatherproof IP66 enclosure for harsh environments Direct USB offload--no need for an adapter cable Includes five Smart Sensor inputs Hinged door and integrated mounting tabs Runs for up to a year on four standard AA batteries Compatible with HOBOware and HOBOware Pro software for logger setup and graphing &amp;...

Reference: UX100-003

Brand: ONSET

UX100-003 HOBO Temperature/Relative Humidity 3.5% Data Logger

(0)
UX100-003 HOBO Temperature/Relative Humidity 3.5% Data Logger With integrated sensors to measure and record temperature and relative humidity (within 3.5% accuracy) in indoor environments.  Important Information Requires HOBOware software and a USB cable. (Note: A USB-A to USB-B mini cable is included w/HOBOware Pro USB Drive software purchase).  What's...

Reference: BL 18

Brand: ECOMATIK

DL 18 Mini-System with Data Logger

(0)
Compatible Sensors with DL 18 and DL 18 BLE: Dendrometer (all models) Temperature sensors (T-series) Leaf sensors (LAT-series) Air humidity and air temperature sensor (EM 14) Soil moisture sensor Light sensor (PAR: EM 20; Pyranometer: EM 25)

Reference: ZSC

Brand: METER GROUP

ZSC Sensor Interface

(0)
ZSC Bluetooth Inhalation Adapter for METER Group ZSC Sensors With the ZSC Bluetooth Wireless Adapter from METER Group you can carry out sensor measurements using your mobile phone. When installing sensors in the field, it is very important to check that the sensors are reading correctly. Therefore, being able to use the mobile phone to evaluate each...

Follow us on Facebook