| 1. Fully electronic kinetic energy type, rainfall monitoring identifies rainfall according to the intensity of raindrops. 2. Measure instantaneous rainfall output, real-time measurement data can be output from drizzle to extremely heavy rain. |
|
1. Integrated design, all components are integrated inside the product, no exposed parts and connecting wires, easy installation and maintenance, extremely low failure rate, and long service life. |
1. Integrated structure, small size and light weight. The hoop-type installation is simple and convenient. A single site can complete the operation in 10 minutes. 2. Simple structure, light weight, quick dismantling and no engineering pollutants. |
1. No need for manual maintenance, remote calibration and upgrade, etc., maintenance-free. |
| 1. The rain gauge collects rainwater, and determines the rainfall value by counting the number of dumping buckets by volume. 2. There is usually a delay in rainfall data, especially during light rain, heavy rain, and heavy rain, which results in a deviation from the real-time situation. |
1. Combined design, RTU, DTU, power supply unit and other components are independent of each other and need to be installed separately, with more exposed connections, higher failure rate and shorter service life. |
1. A cement base weighing 0.5 tons needs to be prepared one week in advance, and the rain gauge, power supply system, RTU, base bracket, etc. shall be installed separately on site. It is time-consuming and labor-intensive. 2. It cannot be moved after installation, and it is difficult to clean up after disposal. |
1. The rain gauge is often blocked, requiring regular manual maintenance and calibration every month. Maintenance costs are several times or even ten times higher than equipment costs, and there are hidden dangers to personnel safety in special installation locations. |
