H0530 Thermometer with Ethernet Interface and Relay

thernet ambient temperature sensor with two relay outputs.

The H0530 sensor is designed for online temperature monitoring. Its three binary inputs for detecting two-state signals are an advantage. Other devices are controlled via two relay outputs.

Processing and analysis of measured data:
Online in COMET Cloud
COMET database software
Integration into third-party systems

Technical Data

Measured Value
Temperature
Two-state Signal

TEMPERATURE SENSOR

• Measuring Range: -30 to +80 °C
• Accuracy: ±0.4 °C
• Resolution: 0.1 °C

RELAY OUTPUTS

• Number: 2
• Maximum Voltage: 50 V
• Maximum Current: 2 A
• Maximum Power: 60 VA

BINARY INPUTS

• Number: 3
• Binary input signal: dry contact, open collector, or two-state voltage signal.
• The inputs are not galvanically isolated. Minimum pulse duration on the binary input: 500 ms
• Open contact voltage: <3.3 V
• Low voltage level: 0 to +0.5 V
• High voltage level: +3.0 to +30 V

GENERAL TECHNICAL DATA

• Operating temperature: -30 to +80 °C
• Internal temperature sensor channels
• Acoustic alarm with integrated buzzer (switchable)
• Output: Ethernet
• Measuring interval: 2 s
• Available temperature units: Celsius and Fahrenheit
• Communication protocol: WWW, Modbus TCP, SNMPv1, SOAP, and XML
• Alarm protocols: Email (SMTP authentication supported), SNMP Trap, and Syslog
• Power supply: 9-30 V DC
• Protection class: IP40
• Dimensions: 136 x 191 x 45 mm; Stem length: 53 mm
• Approximate weight: 340 g
• Warranty: 3 years