
Reference: VH400-2M
Brand: VEGETRONIX
Reference: VH400-2M
Brand: VEGETRONIX
Reference: STC-24
Brand: Meatrol
Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Industrial heat flux sensor
HF05 measures heat flux and surface temperature in industrial environments. The sensor has a fully sealed stainless steel body and a PTFE cable. It can withstand relatively extreme environmental conditions.
Read more
Measurand |
heat flux |
temperature |
Measurement range |
-6000 to 6000 W/m² |
Sensitivity (nominal) |
15 x 10⁻⁶ V/(W/m²) |
Heat flux sensor |
thermopile |
Temperature sensor |
thermocouple type K |
Uncertainty of heat flux calibration |
± 10 % (k= 2) |
Calibration traceability |
to SI units |
Recommended number of sensors |
2 per measurement location |
IP protection class |
IP67 |
Rated operating temperature range |
-30 to +170 °C |
Standard cable length |
3 m |
Order code |
HF05 / cable length in m |
Description
HF05 Industrial Heat Flux Sensor
The HF05 measures the heat flux through the object it is mounted on, in W/m², as well as its surface temperature in °C. The sensors in the HF05 are a thermopile and a K-type thermocouple. A thermopile and thermocouple are passive sensors; they do not require power. The sensors inside the HF05 are protected by a fully sealed stainless steel body.
Typical applications for the HF05 are fouling studies in industrial environments mounted on pipes or the jacket of reactors. The HF05 is also used for industrial insulation performance assessment. Using the HF05 is easy. It can be connected directly to commonly used data logging systems. Heat flux in W/m² is calculated by dividing the output of the HF05, a small voltage, by the sensitivity. T
Suggested use
industrial heat flux measurements
industrial insulation performance assessment
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: RX3004+SP-611
Brand: ONSET
Reference: U0246G
Brand: COMET
Reference: Frigga® Smart
Brand: FRIGGA
Reference: W4710
Brand: COMET
Reference: W0846
Brand: MYJ Sensores
Reference: P8653
Brand: COMET
Reference: C1 tempmate
Brand: tempmate
Reference: 6830
Brand: DAVIS INSTRUMENTS
Reference: SN189C
Brand: COMET
Reference: T5541
Brand: COMET
Reference: DS1922L-F5
Brand: iBUTTON MAXIM INTEGRATED
Reference: RK310-02
Brand: RIKA SENSORS
Reference: S100-TH
Brand: HUATO
Reference: U4440
Brand: COMET
Reference: BLK - GLD
Brand: Hukseflux
Reference: HE2508 GSM MODEM
Brand: HUATO
Industrial heat flux sensor
HF05 measures heat flux and surface temperature in industrial environments. The sensor has a fully sealed stainless steel body and a PTFE cable. It can withstand relatively extreme environmental conditions.
Read more
check_circle
check_circle