Reference: VH400-2M

Brand: VEGETRONIX

VH400 - Low-Cost Soil Moisture Sensors

(0)
VH400 Soil Moisture Sensor Probe Specifications Power consumption: < 13mA Supply Voltage: 3.5V to 20 VDC. Dimensions See drawing. Power on to Output stable: 400 ms Output Impedance: 10K ohms Operational Temperature: -40ºC to 85ºC Accuracy at 25°C: 2% Output: 0 to 3V related to moisture content Shell Color: Red Voltage Output Curves: Curves, Piecewise...
From Price €78.00
More
In stock

Reference: UA-002-64

Brand: ONSET

UA-002-64 HOBO Pendant Temperature/Light 64K Data Logger

(0)
A miniature, value-priced, waterproof data logger for temperature and light monitoring applications; stores 52K measurements.  IMPORTANT INFORMATION Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1). HOBOware Pro is required when using the HOBO Waterproof Shuttle. See compatible items below.
Price €100.00
More
In stock
All best sellers
  • PAYMENT METHODS

SQ-100X-SS
  • SQ-100X-SS
  • SQ-100X-SS
  • SQ-100X-SS
  • SQ-100X-SS: Original Quantum Sensor MYJ

SQ-100X-SS: Original Quantum Sensor

SQ-100X-SS

SQ-100X-SS: Original Quantum Sensor

The SQ-100X-SS is a self-powered, analog original quantum sensor with a 0 to 250 mV output.

€305.00
VAT excluded
Quantity

Description

The SQ-100X-SS is a self-powered, analog original quantum sensor with a 0 to 250 mV output. The sensor features a rugged, self-cleaning sensor housing design, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy (transmitted) PPFD measurements in the same environments. Quantum sensors are also used to measure PAR (Photosynthetically Active Radiation)/PPFD in aquatic environments, including salt water aquariums where corals are grown. Sensor includes IP68 marine-grade stainless-steel cable connector 30 cm from head to simplify sensor removal and replacement for maintenance and recalibration.

The analog version of this sensor (SQ-100X-SS) comes with the inline cable connector placed 30 cm from the sensor head for either standard use as a long-cable pigtail sensor, or for use with our microCache Bluetooth Micro Logger by unscrewing the connector, discarding the long section of cable and then screwing the sensor to the mating connector on the microCache.

Specifications

  • Power Supply: Self-powered
  • Sensitivity: 0.1 mV per µmol mˉ² sˉ¹
  • Calibration Factor: 10 µmol mˉ² sˉ¹ per mV (reciprocal of sensitivity)
  • Calibration Uncertainty: ± 5 %
  • Calibrated Output Range: 0 to 250 mV
  • Measurement Repeatability: Less than 0.5 %
  • Non-stability (Long-term Drift): Less than 2 % per year
  • Non-linearity: Less than 1 % (up to 2500 µmol mˉ² sˉ¹ )
  • Response Time: Less than 1 ms
  • Field of View: 180˚
  • Spectral Range: 370 to 650 nm (wavelengths where response is greater than 50 % of maximum)
  • Directional (Cosine) Response: ± 5 % at 75˚ zenith angle
  • Temperature Response: -0.04 % per C
  • Operating Environment: -10 to 60 C; 0 to 100 % relative humidity; can be submerged in water up to depths of 30 m
  • Dimensions: 24 mm diameter, 33 mm height
  • Mass: 90 g (with 5 m of lead wire)
  • Cable: 5 m of shielded, twisted-pair wire with TPR jacket (high water resistance, high UV stability, flexibility in cold conditions)
  • Warranty: 4 years against defects in materials and workmanship
  • Manufactured: Assembled in the USA
Product Details
SQ-100X-SS
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:

Reference: STP01

Brand: Hukseflux

STP01 Soil Temperature Sensor

(0)
STP01 Soil Temperature Sensor STP01 accurately measures the temperature profile of the soil at 5 depths close to its surface. It is used for scientific grade surface energy balance measurements. The sensor is buried and usually cannot be taken to the laboratory for calibration. The on-line self-test using the incorporated heating wire offers a solution to...
More
In stock

Reference: SR05-D2A2

Brand: Hukseflux

SR05-D2A2 Pyranometer

(0)
Digital second class pyranometer with Modbus over TTL and 4-20 mA output SR05 series is the most affordable range of pyranometers meeting ISO 9060 second class requirements. SR05 measures solar radiation received by a plane surface, in W/m², from a 180 ° field of view angle. It is ideal for general solar radiation measurements in (agro-)meteorological...
Price €645.00
More
In stock

Reference: MX2501

Brand: ONSET

MX2501 HOBO pH and Temperature Data Logger

(0)
MX2501 HOBO pH and Temperature Data Logger A pH and temperature data logger for long-term monitoring of pH in water, leveraging Bluetooth for easy setup and data dowload.Important InformationRequires the HOBOconnect app and a compatible mobile device or Windows computer. NOTE: pH electrodes should always be stored in storage solution when not deployed.
Price €850.00
More
In stock

Reference: SU-220

Brand: Apogee Instruments

SU-220: USB output UV-A Sensor

(0)
SU-220: USB output UV-A Sensor The SU-220 UV-A, smart sensor can be connected directly to a computer (Windows or macOS X) via USB for taking spot measurements or graphing and datalogging real-time PPFD using the included software.
Price €625.00
More
In stock

Reference: HF03-LI19

Brand: Hukseflux

HF03-LI19 - HEAT FLUX SENSOR

(0)
Portable heat flux sensor, with read-out unit / datalogger HF03 is a heat flux sensor that is applied in mobile measurements. It is combined with LI19, a high accuracy handheld read-out unit / datalogger. The combination HF03- LI19 is typically used to study heat flux levels of flares and fires, and to verify the performance of permanently installed flare...
Price €6,190.00
More
In stock

Follow us on Facebook