
Reference: 10HS ECHO - 5Mts
Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: VH400-2M
Brand: VEGETRONIX
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
Digital second class pyranometer with Modbus RS-485 and 0-1 V output
SR05 series is the most affordable range of pyranometers meeting ISO 9060 second class requirements. SR05 measures solar radiation received by a plane surface, in W/m², from a 180 ° field of view angle. It is ideal for general solar radiation measurements in (agro-)meteorological networks and PV monitoring. The pyranometer is easy to mount and install, in particular with SR05's ball levelling mechanism. Version SR05-D1A3 offers Modbus over RS-485 and 0-1 V output.
Measurand | hemispherical solar radiation |
ISO 9060:2018 classification | spectrally flat Class C pyranometer |
ISO 9060:1990 classification | second class pyranometer |
IEC 61724-1:2021 compliance | Class B |
Application | meteorology / climatology,other |
Heater | no |
Output | 0-1 V,Modbus RS-485 |
Calibration uncertainty | < 2.4 % (k = 2) |
Calibration traceability | to WRR |
Spectral range | 285 to 3000 x 10⁻⁹ m |
Rated operating temperature range | 40 to +80 °C |
Standard cable length | 3 m |
Rated operating voltage | 5 to 30 VDC range |
Levelling | optional ball levelling with / without tube mount |
Output | : |
Communication protocol | Modbus |
Hardware interface | 2-wire (half duplex) RS 485 |
Digital output | irradiance in W/m² and instrument body temperature in °C |
Analogue output | 0-1 V |
Transmitted range | 0-1600 W/m² |
Version order codes | SR05-D1A3, SR05-D1A3-BL, SR05-D1A3-TMBL |
Mounting and Leveling the SR05 Pyranometer
The SR05 has an optional ball leveling mechanism and a unique pipe holder for easy mounting and leveling on a (non)horizontal surface or pipe.
Design and Performance
The SR05 pyranometer employs a thermopile sensor with a black coated surface, an anodized aluminum dome and body with visible bubble level. The SR05 has a variety of industry standard outputs, both digital and analog:
SR05-D1A3: Digital sensor with Modbus over RS-485 and 0-1V analog output
SR05-D2A2: Digital sensor with Modbus over TTL and 4-20mA analog output
SR05-A1: Analog sensor with millivolt analog output
Suggested use
general solar radiation measurements
(agro)meteorological networks
monitoring of photovoltaic power plants
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: BH-90M
Brand: BOSEAN
Reference: 57080182 1gr
Brand: FUEL CELL
Reference: FS4309-U-A31-X
Brand: FUEHLER SYSTEME
Reference: TR32B
Brand: TandD
Reference: U0121M
Reference: U4440G
Brand: COMET
Reference: LS220H
Brand: LINSHANG
Reference: UX120-006M
Brand: ONSET
Reference: C109
Brand: RST
Reference: 11060016
Brand: FUEL CELL
Reference: 100.053
Brand: PRONAMIC
Reference: Y051L
Brand: HORIBA LAQUAtwin
Reference: RXW-WL-868
Brand: ONSET
Reference: RK95-01
Brand: RIKA SENSORS
Reference: GMS800
Brand: RST
Reference: 28010017
Brand: FUEL CELL
Digital second class pyranometer with Modbus RS-485 and 0-1 V output
SR05 series is the most affordable range of pyranometers meeting ISO 9060 second class requirements. SR05 measures solar radiation received by a plane surface, in W/m², from a 180 ° field of view angle. It is ideal for general solar radiation measurements in (agro-)meteorological networks and PV monitoring. The pyranometer is easy to mount and install, in particular with SR05's ball levelling mechanism. Version SR05-D1A3 offers Modbus over RS-485 and 0-1 V output.
check_circle
check_circle