Reference: 10HS ECHO - 5Mts
Reference: BASE-U-4
Reference: UA-002-64
Brand: ONSET
Reference: VH400-2M
Brand: VEGETRONIX
Reference: DS1922E-F5
Brand: iBUTTON MAXIM INTEGRATED
PAYMENT METHODS
Output PM2.5/PM10 0-10 V, 4-20 mA
0-10 V, 4-20 mA
Equipment without Display
Measurement range PM2.5/PM10 0 µg/m³ ... 1000 µg/m³
The laser-based fine dust/particle sensor detects and quantifies the particle sizes PM2.5/PM10 in the ambient air. The transmitter converts the measured value 0...1000 µg/m³ into a standardized, analog output signal 0-10 V and 4-20 mA. There are 3 detection variants available, which can be easily switched over in the device as required using DIP switch technology. With the setting PM2.5, only fine dust with particle sizes up to 2.5 µm is counted, with PM10 only particle sizes up to 10 µm. With Auto, both are counted, but only the higher measured value is output. As an option, the measuring device has a backlit display and potential-free changeover contact. In the version with a backlit LCD display, the measured value and min / max values, the relay status, etc. are displayed. The switching threshold of the changeover contact can be set using a potentiometer. The housing with innovative hinge locking technology, sufficient terminal space and easy-to-connect elevator terminals offers maximum installation freedom and speed. The fine dust measuring device is ideal for use in workplaces, schools, living rooms, medical facilities to minimize damage to the human body (asthma attacks, cardiovascular diseases) caused by air pollution.
| Measurement range PM2.5/PM10: | 0 µg/m³ ... 1000 µg/m³ |
| Accuracy PM2.5/PM10: | ±5 ?g/m³ + max. ±4% FS (@ 20°C, 45% r.F., 1013 mbar) |
| Temperature dependency: | ±1% FS / 10 K |
| Long term stability: | ±1% FS/year |
| Sensor: | laser-based sensor |
| Response time (t90): | < 10 s |
| Supply voltage: | 24 V AC/DC (±5%) |
| Current consumption: | U operating: 50 mA (basic current); I operating: 70mA (basic current), R: +15mA in addition to the basic current; D(DBL off): +3mA in addition to the basic current; D (DBL on): +15mA in addition to the basic current |
| Analogue output 0-10 V: | 3-wire connection |
| Analogue output 4-20 mA: | 3-wire connection |
| Alarm output: | 1 x potential-free change-over contact, 48 V, 1 A |
| Switching Hysteresis Relay: | 2% FS (without Display), 0,5...5% FS adjustable (with Display) |
| Electrical connection: | screw terminals max. 1,5 mm² |
| Display: | optional LCD display with backlight on/off/auto |
| Cable gland: | PG11 high-strength cable gland with strain relief |
| Housing: | Polycarbonate PC UL 94 V0 with hinge locks, color signal white similar to RAL 9003 |
| Dimensions: | Housing: L 89 x W 80 x H 47 mm |
| Protection type: | IP65 (housing/electronic), IP20 (sensor) |
| Protection class: | III |
| Working range r.H.: | 0...98% r.H. in contaminant-free, non-condensing air |
| Working temperature: | 0...+50°C |
| Storage temperature: | -20...+50°C |
| Installation: | screw fastening |
| Approvals: | CE, EAC, RoHS |
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: U8410M
Brand: COMET
Reference: H3531
Brand: COMET
Reference: U23-003
Brand: ONSET
Reference: PL400
Reference: 40310
Brand: Innoquest, Inc.
Reference: T-Z01
Brand: BOSEAN
Reference: S1 V2 Tempmate
Brand: tempmate
Reference: HE500M
Brand: HUATO
Reference: MX1105
Brand: ONSET
Reference: URI
Reference: LS176
Brand: LINSHANG
Reference: FS6003-PACK
Brand: FUEHLER SYSTEME
Reference: 12120016
Brand: FUEL CELL
Reference: TR-72nw
Brand: TandD
Reference: ST2424
Brand: MAE
Output PM2.5/PM10 0-10 V, 4-20 mA
0-10 V, 4-20 mA
Equipment without Display
Measurement range PM2.5/PM10 0 µg/m³ ... 1000 µg/m³
check_circle
check_circle
