Reference: UA-002-64

Brand: ONSET

UA-002-64 HOBO Pendant Temperature/Light 64K Data Logger

(0)
A miniature, value-priced, waterproof data logger for temperature and light monitoring applications; stores 52K measurements.  IMPORTANT INFORMATION Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1). HOBOware Pro is required when using the HOBO Waterproof Shuttle. See compatible items below.
Price €100.00
More
In stock

Reference: VH400-2M

Brand: VEGETRONIX

VH400 - Low-Cost Soil Moisture Sensors

(0)
VH400 Soil Moisture Sensor Probe Specifications Power consumption: < 13mA Supply Voltage: 3.5V to 20 VDC. Dimensions See drawing. Power on to Output stable: 400 ms Output Impedance: 10K ohms Operational Temperature: -40ºC to 85ºC Accuracy at 25°C: 2% Output: 0 to 3V related to moisture content Shell Color: Red Voltage Output Curves: Curves, Piecewise...
From Price €78.00
More
In stock
All best sellers
  • PAYMENT METHODS

H-TEC's Fuel Cell Concept Car & Gas Station
  • H-TEC's Fuel Cell Concept Car & Gas Station
  • H-TEC's Fuel Cell Concept Car & Gas Station
  • H-TEC's Fuel Cell Concept Car & Gas Station
  • H-TEC's Fuel Cell Concept Car & Gas Station

H-TEC's Fuel Cell Concept Car & Gas Station

12120018

H-TEC's Fuel Cell Concept Car & Gas Station

H-TEC's most realistic model car set gives observers a glimpse of the transportation technology of the future.  The gas station uses solar power to run an electrolyser and produce hydrogen gas.  This gas then feeds the air-breathing double fuel cell on board the car, producing electricity and driving the car forward.  One tank of hydrogen produces enough power for a 7-minute run time!

Quantity

Description

Diminishing resources, more severe environmental impacts and the ever increasing demand for energy force us to reconsider the structure of our energy supply system.  Automobile industry and oil companies increasingly invest in hydrogen technology because it offers solutions to some of these concerns.  This fascinating technology combines a sound energy supply with minimal impact on our natural resources.

Hydrogen is produced and stored in the Hydrogen Gas Station.  The Fuel Cell Concept Car is fueled with hydrogen, and realistically demonstrates the technology of future fuel cell vehicles.

The equipment can be used to demonstrate the operation of PEM (Proton Exchange Membrane) fuel cells and PEM Electrolyzers.

Fuel Cell Concept Car and Gas Station - D203 Includes:
✔ Model Car
✔ Fuel Cell Stack Hydrogen and Air (two cells)
✔ Electrolyzer
✔ Hydrogen Storage Tank
✔ 3-Panel Solar Module
✔ Hydrogen Gas Station Base
✔ Power Supply (can be used in placed of solar module for faster operation)
✔ Instructional Textbook

The included H-TEC Education fuel cell textbook contains information about the technology and instructions for a variety of experiments.

Contents

Fuel Cell Concept
The PEM fuel cell generates electrical energy from hydrogen and oxygen. It is based on PEM technology, which is the most widely used technology in the development of fuel cell applications, for example for motor vehicles or stationary power supply systems.
Power: 300 mW
Dimensions (H x W x D): 70 x 105 x 245 mm
Weight: 260 g

Hydrogen Gas Station
The Hydrogen Gas Station uses solar energy to run an electrolyser and produce hydrogen gas. This gas then powers the air-breathing dual fuel cell on board the car, producing electricity!
Electrolyzer: 1 W
Hydrogen gas storage: 10 cm3
Hydrogen production: 4.3 cm3/min
Solar module: 2.0 V / 1050 mA
Dimensions (H x W x D): 245 x 360 x 150 mm
Weight: 1.25 kg

Instructive textbook
The textbook contains information about the technology and instructions for a variety of experiments.

Complete fuel cell car and filling station concept
• Dimensions (H x W x D): 230 x 360 x 250 mm (9 x 14.2 x 9.8 in)
• Weight: 1.6 kg (3.5 lb)

Product Details
12120018
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:

Reference: 12120031

Brand: FUEL CELL

Quattro Fuel Cell H2/O2/Air

(0)
Quattro Fuel Cell H2/O2/Air This Proton Exchange Membrane (PEM) fuel cell produces electricity by using hydrogen and oxygen gas (or atmospheric oxygen).  Its only by-products are water and heat.
More
In stock

Reference: 57080237 1gr

Brand: FUEL CELL

57080237 80% Palladium on Vulcan

(0)
80% Paladio soportado sobre Vulcan XC-72 (carbono).Aplicaciones sugeridas El paladio se utiliza con mayor frecuencia para aplicaciones de celdas de combustible de membrana de intercambio de protones (PMFC).
From Price €1,095.00
More
In stock

Reference: 12120026

Brand: FUEL CELL

1-Cell Rebuildable PEM Electrolyzer Kit

(0)
1-Cell Rebuildable PEM Electrolyzer Kit H-TEC Education's 1-Cell Rebuildable PEM Electrolyzer Kit contains a Proton Exchange Membrane ElectrolyZer (PEMEZ) that can be completely disassembled and then reassembled especially for education and research purposes.  The PEM electrolyzer can generate hydrogen and oxygen from de-ionized water (or distilled water)...
More
In stock

Reference: 12120020

Brand: FUEL CELL

12120020 Single Electrolyzer

(0)
12120020 Single Electrolyzer The Single Electrolyzer (Formerly Electrolyzer Cell 5) is a PEM electrolyzer for the production of hydrogen and oxygen.  This cell can only be used in electrolyzer mode for the production of hydrogen.  Please see technical specifications for hydrogen production levels.
More
In stock

Reference: 12120022

Brand: FUEL CELL

Quattro Electrolyzer

(0)
Quattro Electrolyzer The Quattro Electrolyzer is a proton exchange membrane (PEM) based electrolyzer hardware that is comprised of four electrolyzer cells for the production of hydrogen and oxygen.  The electrolyzer technology is one of the most promising clean technologies for creating hydrogen and oxygen gases from the water electrolysis reaction.
More
In stock

Reference: 11044001

Brand: FUEL CELL

Electrolyzer MEA - 3 Layer

(0)
Electrolyzer MEA - 3 Layer Electrolyzer Membrane Electrode Assemblies (MEA) for high efficiency production of Hydrogen and Oxygen.  These brand of Electrolyzer MEAs are used by many as their “gold standard” when designing new Electrolyzer products.  These particular type of Electrolyzer MEAs are 3-layer configurations, or Catalyst Coated Membrane (CCM),...
More
In stock

Reference: 11060059 - 5x5

Brand: FUEL CELL

11060059 Platinum on Vulcan - Carbon Cloth Electrode (W1S1011) 0.5 mg/cm² 60%

(0)
The standard low-cost electrode utilizing a woven carbon cloth substrate and a 60% Platinum on Vulcan Carbon support catalyst.  This low loading is designed for cost sensitive applications and is suitable for electrochemical systems needing low amounts of Platinum to support the reaction.  This electrode is perfect for Hydrogen/Air Fuel Cell applications...
More
In stock

Reference: 12120016

Brand: FUEL CELL

Solar Hydrogen Demo Car and Gas Station

(0)
Solar Hydrogen Demo Car and Gas Station H-TEC's Solar Hydrogen Car and Gas Station Demo set provides the perfect illustration of the future technology of hydrogen powered vehicles!  With the future looking greener and cleaner this demonstration model will easily illustrate all of the best characteristics of hydrogen to students, colleagues, and friends...
More
In stock

Reference: 11060016

Brand: FUEL CELL

11060016 Platinum on Vulcan - Carbon Paper Electrode 0.2 mg/cm² 20%

(0)
A low-cost electrode utilizing a carbon fiber paper substrate and a 20% Platinum on Vulcan Carbon support catalyst.  This low loading is designed for cost sensitive applications and is suitable for electrochemical systems needing low amounts of Platinum to support the reaction.  This electrode is perfect for Hydrogen/Air Fuel Cell applications where the...
More
In stock

Reference: 11060020 - 10x10

Brand: FUEL CELL

11060020 Platinum on Vulcan - Carbon Paper Electrode 0.3 mg/cm² 40%

(0)
A low-cost electrode utilizing a carbon fiber paper substrate and a 40% Platinum on Vulcan Carbon support catalyst.  This low loading is designed for cost sensitive applications and is suitable for electrochemical systems needing low amounts of Platinum to support the reaction.  This electrode is perfect for Hydrogen/Air Fuel Cell applications where the...
More
In stock

Reference: 12120044

Brand: FUEL CELL

Tutorial Pro

(0)
Tutorial Pro H-TEC's Tutorial Pro, T203 is a more extensive kit than the Junior Basic or Tutorial Basic that allows experiments across a wide range of hydrogen applications, including automotive applications.
More
In stock

Reference: 12120008

Brand: FUEL CELL

H-TEC 1 Measurement Set 1

(0)
H-TEC 1 Measurement Set 1 The H-TEC Measurement Set 1 is an experimentation kit consisting of a decade resistor, two multi-meters, stopwatch and cables.  The Measurement Set is completely compatible for all of the H-TEC Tutorial product range, as well as H-TEC Junior products.
More
In stock

Reference: 28010023

Brand: FUEL CELL

PFSA D15-R ePTFE Reinforced Proton Exchange Membrane

(0)
PFSA D15-R ePTFE Reinforced Proton Exchange Membrane PFSA D15-R ePTFE Reinforced Proton Exchange Membrane (PEM) is used to separate the anode and cathode compartment of PEM fuel cell stacks that usually consume H2/Air as the fuel/oxidant and requires achieving high current densities (which necessiates the use of a relatively thin membrane). It is quite a...
More
In stock

Follow us on Facebook